# Do not modify this file!  It was generated by ‘nixos-generate-config’
# and may be overwritten by future invocations.  Please make changes
# to /etc/nixos/configuration.nix instead.
{ config, lib, pkgs, modulesPath, ... }:
{
  imports = [ ];
  boot.initrd.availableKernelModules = [ "sd_mod" "sr_mod" ];
  boot.initrd.kernelModules = [ ];
  boot.kernelModules = [ ];
  boot.extraModulePackages = [ ];
  fileSystems."/" =
    { device = "/dev/disk/by-uuid/ca0d911e-5f86-4149-be33-644bedae7818";
      fsType = "ext4";
    };
  fileSystems."/boot" =
    { device = "/dev/disk/by-uuid/DCE8-46F0";
      fsType = "vfat";
      options = [ "fmask=0077" "dmask=0077" ];
    };
  swapDevices = [ ];
  # Enables DHCP on each ethernet and wireless interface. In case of scripted networking
  # (the default) this is the recommended approach. When using systemd-networkd it's
  # still possible to use this option, but it's recommended to use it in conjunction
  # with explicit per-interface declarations with `networking.interfaces.<interface>.useDHCP`.
  networking.useDHCP = lib.mkDefault true;
  # networking.interfaces.eth0.useDHCP = lib.mkDefault true;
  nixpkgs.hostPlatform = lib.mkDefault "x86_64-linux";
  virtualisation.hypervGuest.enable = true;
}

{ ... }: {
  imports = [
    ./configuration.nix
    ./hardware-configuration.nix
  ];
}

# Edit this configuration file to define what should be installed on
# your system. Help is available in the configuration.nix(5) man page, on
# https://search.nixos.org/options and in the NixOS manual (`nixos-help`).
{ inputs, config, lib, pkgs, ... }:
{
  imports =
    [ # Include the results of the hardware scan.
      ./hardware-configuration.nix
      ../common/programs
      ../common/services
    ];
  nixpkgs = {
    # You can add overlays here
    overlays = [
      # If you want to use overlays exported from other flakes:
      # neovim-nightly-overlay.overlays.default
      # Or define it inline, for example:
      # (final: prev: {
      #   hi = final.hello.overrideAttrs (oldAttrs: {
      #     patches = [ ./change-hello-to-hi.patch ];
      #   });
      # })
    ];
    # Configure your nixpkgs instance
    config = {
      # Disable if you don't want unfree packages
      allowUnfree = true;
    };
  };
  nix = let
    flakeInputs = lib.filterAttrs (_: lib.isType "flake") inputs;
  in {
    settings = {
      # Enable flakes and new 'nix' command
      experimental-features = "nix-command flakes";
      # Opinionated: disable global registry
      flake-registry = "";
      # Workaround for https://github.com/NixOS/nix/issues/9574
      nix-path = config.nix.nixPath;
    };
    # Opinionated: disable channels
    channel.enable = false;
    # Opinionated: make flake registry and nix path match flake inputs
    registry = lib.mapAttrs (_: flake: {inherit flake;}) flakeInputs;
    nixPath = lib.mapAttrsToList (n: _: "${n}=flake:${n}") flakeInputs;
  };
  users.users = {
    root = {
      openssh.authorizedKeys.keys = [
        ''ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIPHS1VnYpuq5W2WWfd/t47rB/nEv0BNtRqz55jLxnbHL'' ''ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIJwRqzBdvd8HiPGMjH2tU1tZKzT+9i/2mRbafag0KcpI grantchristophera@gmail.com''
      ];
    };
  };
  # Use the systemd-boot EFI boot loader.
  boot.loader.systemd-boot.enable = true;
  boot.loader.efi.canTouchEfiVariables = true;
  networking.hostName = "automaton"; # Define your hostname.
  # Pick only one of the below networking options.
  # networking.wireless.enable = true;  # Enables wireless support via wpa_supplicant.
  # networking.networkmanager.enable = true;  # Easiest to use and most distros use this by default.
  # Set your time zone.
  # time.timeZone = "Europe/Amsterdam";
  # Configure network proxy if necessary
  # networking.proxy.default = "http://user:password@proxy:port/";
  # networking.proxy.noProxy = "127.0.0.1,localhost,internal.domain";
  # Select internationalisation properties.
  # i18n.defaultLocale = "en_US.UTF-8";
  # console = {
  #   font = "Lat2-Terminus16";
  #   keyMap = "us";
  #   useXkbConfig = true; # use xkb.options in tty.
  # };
  # Enable the X11 windowing system.
  # services.xserver.enable = true;
  
  # Configure keymap in X11
  # services.xserver.xkb.layout = "us";
  # services.xserver.xkb.options = "eurosign:e,caps:escape";
  # Enable CUPS to print documents.
  # services.printing.enable = true;
  # Enable sound.
  # hardware.pulseaudio.enable = true;
  # OR
  # services.pipewire = {
  #   enable = true;
  #   pulse.enable = true;
  # };
  # Enable touchpad support (enabled default in most desktopManager).
  # services.libinput.enable = true;
  # Define a user account. Don't forget to set a password with ‘passwd’.
  # users.users.alice = {
  #   isNormalUser = true;
  #   extraGroups = [ "wheel" ]; # Enable ‘sudo’ for the user.
  #   packages = with pkgs; [
  #     firefox
  #     tree
  #   ];
  # };
  # List packages installed in system profile. To search, run:
  # $ nix search wget
  # environment.systemPackages = with pkgs; [
  #   vim # Do not forget to add an editor to edit configuration.nix! The Nano editor is also installed by default.
  #   wget
  # ];
  # Some programs need SUID wrappers, can be configured further or are
  # started in user sessions.
  # programs.mtr.enable = true;
  # programs.gnupg.agent = {
  #   enable = true;
  #   enableSSHSupport = true;
  # };
  # List services that you want to enable:
  # Enable the OpenSSH daemon.
  # services.openssh.enable = true;
  # Open ports in the firewall.
  # networking.firewall.allowedTCPPorts = [ ... ];
  # networking.firewall.allowedUDPPorts = [ ... ];
  # Or disable the firewall altogether.
  # networking.firewall.enable = false;
  # Copy the NixOS configuration file and link it from the resulting system
  # (/run/current-system/configuration.nix). This is useful in case you
  # accidentally delete configuration.nix.
  # system.copySystemConfiguration = true;
  # This option defines the first version of NixOS you have installed on this particular machine,
  # and is used to maintain compatibility with application data (e.g. databases) created on older NixOS versions.
  #
  # Most users should NEVER change this value after the initial install, for any reason,
  # even if you've upgraded your system to a new NixOS release.
  #
  # This value does NOT affect the Nixpkgs version your packages and OS are pulled from,
  # so changing it will NOT upgrade your system - see https://nixos.org/manual/nixos/stable/#sec-upgrading for how
  # to actually do that.
  #
  # This value being lower than the current NixOS release does NOT mean your system is
  # out of date, out of support, or vulnerable.
  #
  # Do NOT change this value unless you have manually inspected all the changes it would make to your configuration,
  # and migrated your data accordingly.
  #
  # For more information, see `man configuration.nix` or https://nixos.org/manual/nixos/stable/options#opt-system.stateVersion .
  system.stateVersion = "24.05"; # Did you read the comment?
}

      };
      automaton = nixpkgs.lib.nixosSystem {
        specialArgs = {inherit inputs outputs; };
        modules = [./hosts/automaton];