#ifndef ZSTDSEEKABLE_H
#define ZSTDSEEKABLE_H

/** 
 * Required includes:
 *  - stdio.h
 *  - zstd.h
 */ 

/** zstd.h: the ZSTD_SKIPPABLEHEADERSIZE is part of the "experimental" API and
 * currently confined to static-only. But that's not how we roll, is it?
 */
#define ZSTD_SKIPPABLEHEADERSIZE	8

#define ZSTD_seekTableFooterSize 9

#define ZSTD_SEEKABLE_MAGICNUMBER 0x8F92EAB1

#define ZSTD_SEEKABLE_MAXFRAMES 0x8000000U

/* Limit the maximum size to avoid any potential issues storing the compressed size */
#define ZSTD_SEEKABLE_MAX_FRAME_DECOMPRESSED_SIZE 0x80000000U

/*-****************************************************************************
*  Seekable Format
*
*  The seekable format splits the compressed data into a series of "frames",
*  each compressed individually so that decompression of a section in the
*  middle of an archive only requires zstd to decompress at most a frame's
*  worth of extra data, instead of the entire archive.
******************************************************************************/

typedef struct ZSTD_seekable_CStream_s ZSTD_seekable_CStream;
typedef struct ZSTD_seekable_s ZSTD_seekable;
typedef struct ZSTD_seekTable_s ZSTD_seekTable;

/*-****************************************************************************
*  Seekable compression - HowTo
*  A ZSTD_seekable_CStream object is required to tracking streaming operation.
*  Use ZSTD_seekable_createCStream() and ZSTD_seekable_freeCStream() to create/
*  release resources.
*
*  Streaming objects are reusable to avoid allocation and deallocation,
*  to start a new compression operation call ZSTD_seekable_initCStream() on the
*  compressor.
*
*  Data streamed to the seekable compressor will automatically be split into
*  frames of size `maxFrameSize` (provided in ZSTD_seekable_initCStream()),
*  or if none is provided, will be cut off whenever ZSTD_seekable_endFrame() is
*  called or when the default maximum frame size (2GB) is reached.
*
*  Use ZSTD_seekable_initCStream() to initialize a ZSTD_seekable_CStream object
*  for a new compression operation.
*  `maxFrameSize` indicates the size at which to automatically start a new
*  seekable frame.  `maxFrameSize == 0` implies the default maximum size.
*  `checksumFlag` indicates whether or not the seek table should include frame
*  checksums on the uncompressed data for verification.
*  @return : a size hint for input to provide for compression, or an error code
*            checkable with ZSTD_isError()
*
*  Use ZSTD_seekable_compressStream() repetitively to consume input stream.
*  The function will automatically update both `pos` fields.
*  Note that it may not consume the entire input, in which case `pos < size`,
*  and it's up to the caller to present again remaining data.
*  @return : a size hint, preferred nb of bytes to use as input for next
*            function call or an error code, which can be tested using
*            ZSTD_isError().
*            Note 1 : it's just a hint, to help latency a little, any other
*                     value will work fine.
*
*  At any time, call ZSTD_seekable_endFrame() to end the current frame and
*  start a new one.
*
*  ZSTD_seekable_endStream() will end the current frame, and then write the seek
*  table so that decompressors can efficiently find compressed frames.
*  ZSTD_seekable_endStream() may return a number > 0 if it was unable to flush
*  all the necessary data to `output`.  In this case, it should be called again
*  until all remaining data is flushed out and 0 is returned.
******************************************************************************/

/*===== Seekable compressor management =====*/
ZSTDLIB_API ZSTD_seekable_CStream* ZSTD_seekable_createCStream(void);
ZSTDLIB_API size_t ZSTD_seekable_freeCStream(ZSTD_seekable_CStream* zcs);

/*===== Seekable compression functions =====*/
ZSTDLIB_API size_t ZSTD_seekable_initCStream(ZSTD_seekable_CStream* zcs, int compressionLevel, int checksumFlag, unsigned maxFrameSize);
ZSTDLIB_API size_t ZSTD_seekable_compressStream(ZSTD_seekable_CStream* zcs, ZSTD_outBuffer* output, ZSTD_inBuffer* input);
ZSTDLIB_API size_t ZSTD_seekable_endFrame(ZSTD_seekable_CStream* zcs, ZSTD_outBuffer* output);
ZSTDLIB_API size_t ZSTD_seekable_endStream(ZSTD_seekable_CStream* zcs, ZSTD_outBuffer* output);

/*= Raw seek table API
 *  These functions allow for the seek table to be constructed directly.
 *  This table can then be appended to a file of concatenated frames.
 *  This allows the frames to be compressed independently, even in parallel,
 *  and compiled together afterward into a seekable archive.
 *
 *  Use ZSTD_seekable_createFrameLog() to allocate and initialize a tracking
 *  structure.
 *
 *  Call ZSTD_seekable_logFrame() once for each frame in the archive.
 *  checksum is optional, and will not be used if checksumFlag was 0 when the
 *  frame log was created.  If present, it should be the least significant 32
 *  bits of the XXH64 hash of the uncompressed data.
 *
 *  Call ZSTD_seekable_writeSeekTable to serialize the data into a seek table.
 *  If the entire table was written, the return value will be 0.  Otherwise,
 *  it will be equal to the number of bytes left to write. */
typedef struct ZSTD_frameLog_s ZSTD_frameLog;
ZSTDLIB_API ZSTD_frameLog* ZSTD_seekable_createFrameLog(int checksumFlag);
ZSTDLIB_API size_t ZSTD_seekable_freeFrameLog(ZSTD_frameLog* fl);
ZSTDLIB_API size_t ZSTD_seekable_logFrame(ZSTD_frameLog* fl, unsigned compressedSize, unsigned decompressedSize, unsigned checksum);
ZSTDLIB_API size_t ZSTD_seekable_writeSeekTable(ZSTD_frameLog* fl, ZSTD_outBuffer* output);


/*-****************************************************************************
*  Seekable decompression - HowTo
*  A ZSTD_seekable object is required to tracking the seekTable.
*
*  Call ZSTD_seekable_init* to initialize a ZSTD_seekable object with the
*  the seek table provided in the input.
*  There are three modes for ZSTD_seekable_init:
*    - ZSTD_seekable_initBuff() : An in-memory API.  The data contained in
*      `src` should be the entire seekable file, including the seek table.
*      `src` should be kept alive and unmodified until the ZSTD_seekable object
*      is freed or reset.
*    - ZSTD_seekable_initFile() : A simplified file API using stdio.  fread and
*      fseek will be used to access the required data for building the seek
*      table and doing decompression operations.  `src` should not be closed
*      or modified until the ZSTD_seekable object is freed or reset.
*    - ZSTD_seekable_initAdvanced() : A general API allowing the client to
*      provide its own read and seek callbacks.
*        + ZSTD_seekable_read() : read exactly `n` bytes into `buffer`.
*                                 Premature EOF should be treated as an error.
*        + ZSTD_seekable_seek() : seek the read head to `offset` from `origin`,
*                                 where origin is either SEEK_SET (beginning of
*                                 file), or SEEK_END (end of file).
*  Both functions should return a non-negative value in case of success, and a
*  negative value in case of failure.  If implementing using this API and
*  stdio, be careful with files larger than 4GB and fseek.  All of these
*  functions return an error code checkable with ZSTD_isError().
*
*  Call ZSTD_seekable_decompress to decompress `dstSize` bytes at decompressed
*  offset `offset`.  ZSTD_seekable_decompress may have to decompress the entire
*  prefix of the frame before the desired data if it has not already processed
*  this section. If ZSTD_seekable_decompress is called multiple times for a
*  consecutive range of data, it will efficiently retain the decompressor object
*  and avoid redecompressing frame prefixes.  The return value is the number of
*  bytes decompressed, or an error code checkable with ZSTD_isError().
*
*  The seek table access functions can be used to obtain the data contained
*  in the seek table.  If frameIndex is larger than the value returned by
*  ZSTD_seekable_getNumFrames(), they will return error codes checkable with
*  ZSTD_isError().  Note that since the offset access functions return
*  unsigned long long instead of size_t, in this case they will instead return
*  the value ZSTD_SEEKABLE_FRAMEINDEX_TOOLARGE.
******************************************************************************/

/*===== Seekable decompressor management =====*/
ZSTDLIB_API ZSTD_seekable* ZSTD_seekable_create(void);
ZSTDLIB_API size_t ZSTD_seekable_free(ZSTD_seekable* zs);

/*===== Seekable decompression functions =====*/
ZSTDLIB_API size_t ZSTD_seekable_initBuff(ZSTD_seekable* zs, const void* src, size_t srcSize);
ZSTDLIB_API size_t ZSTD_seekable_initFile(ZSTD_seekable* zs, FILE* src);
ZSTDLIB_API size_t ZSTD_seekable_decompress(ZSTD_seekable* zs, void* dst, size_t dstSize, unsigned long long offset);
ZSTDLIB_API size_t ZSTD_seekable_decompressFrame(ZSTD_seekable* zs, void* dst, size_t dstSize, unsigned frameIndex);

#define ZSTD_SEEKABLE_FRAMEINDEX_TOOLARGE (0ULL-2)
/*===== Seekable seek table access functions =====*/
ZSTDLIB_API unsigned ZSTD_seekable_getNumFrames(const ZSTD_seekable* zs);
ZSTDLIB_API unsigned long long ZSTD_seekable_getFrameCompressedOffset(const ZSTD_seekable* zs, unsigned frameIndex);
ZSTDLIB_API unsigned long long ZSTD_seekable_getFrameDecompressedOffset(const ZSTD_seekable* zs, unsigned frameIndex);
ZSTDLIB_API size_t ZSTD_seekable_getFrameCompressedSize(const ZSTD_seekable* zs, unsigned frameIndex);
ZSTDLIB_API size_t ZSTD_seekable_getFrameDecompressedSize(const ZSTD_seekable* zs, unsigned frameIndex);
ZSTDLIB_API unsigned ZSTD_seekable_offsetToFrameIndex(const ZSTD_seekable* zs, unsigned long long offset);


/*-****************************************************************************
*  Direct exploitation of the seekTable
*
*  Memory constrained use cases that manage multiple archives
*  benefit from retaining multiple archive seek tables
*  without retaining a ZSTD_seekable instance for each.
*
*  Below API allow the above-mentioned use cases
*  to initialize a ZSTD_seekable, extract its (smaller) ZSTD_seekTable,
*  then throw the ZSTD_seekable away to save memory.
*
*  Standard ZSTD operations can then be used
*  to decompress frames based on seek table offsets.
******************************************************************************/

/*===== Independent seek table management =====*/
ZSTDLIB_API ZSTD_seekTable* ZSTD_seekTable_create_fromSeekable(const ZSTD_seekable* zs);
ZSTDLIB_API size_t ZSTD_seekTable_free(ZSTD_seekTable* st);

/*===== Direct seek table access functions =====*/
ZSTDLIB_API unsigned ZSTD_seekTable_getNumFrames(const ZSTD_seekTable* st);
ZSTDLIB_API unsigned long long ZSTD_seekTable_getFrameCompressedOffset(const ZSTD_seekTable* st, unsigned frameIndex);
ZSTDLIB_API unsigned long long ZSTD_seekTable_getFrameDecompressedOffset(const ZSTD_seekTable* st, unsigned frameIndex);
ZSTDLIB_API size_t ZSTD_seekTable_getFrameCompressedSize(const ZSTD_seekTable* st, unsigned frameIndex);
ZSTDLIB_API size_t ZSTD_seekTable_getFrameDecompressedSize(const ZSTD_seekTable* st, unsigned frameIndex);
ZSTDLIB_API unsigned ZSTD_seekTable_offsetToFrameIndex(const ZSTD_seekTable* st, unsigned long long offset);


/*===== Seekable advanced I/O API =====*/
typedef int(ZSTD_seekable_read)(void* opaque, void* buffer, size_t n);
typedef int(ZSTD_seekable_seek)(void* opaque, long long offset, int origin);
typedef struct {
    void* opaque;
    ZSTD_seekable_read* read;
    ZSTD_seekable_seek* seek;
} ZSTD_seekable_customFile;
ZSTDLIB_API size_t ZSTD_seekable_initAdvanced(ZSTD_seekable* zs, ZSTD_seekable_customFile src);

#endif