# 2007 April 26
#
# The author disclaims copyright to this source code.  In place of
# a legal notice, here is a blessing:
#
#    May you do good and not evil.
#    May you find forgiveness for yourself and forgive others.
#    May you share freely, never taking more than you give.
#
#***********************************************************************
# This file implements regression tests for SQLite library.  The
# focus of this file is testing the incremental vacuum feature.
#
# Note: There are also some tests for incremental vacuum and IO 
# errors in incrvacuum_ioerr.test.
#
# $Id: incrvacuum.test,v 1.23 2009/02/18 20:31:18 drh Exp $

set testdir [file dirname $argv0]
source $testdir/tester.tcl

# If this build of the library does not support auto-vacuum, omit this
# whole file.
ifcapable {!autovacuum || !pragma} {
  finish_test
  return
}

#---------------------------------------------------------------------
# Test the pragma on an empty database.
#
do_test incrvacuum-1.1 {
  execsql {
    pragma auto_vacuum;
  }
} $sqlite_options(default_autovacuum)
do_test incrvacuum-1.2.0 {
  # File size is sometimes 1 instead of 0 due to the hack we put in
  # to work around ticket #3260.  Search for comments on #3260 in
  # os_unix.c.
  expr {[file size test.db] > 1}
} {0}
do_test incrvacuum-1.2 {
  # This command will create the database.
  execsql {
    pragma auto_vacuum = 'full';
    pragma auto_vacuum;
  }
} {1}
do_test incrvacuum-1.2.1 {
  expr {[file size test.db] > 0}
} {1}
do_test incrvacuum-1.3 {
  execsql {
    pragma auto_vacuum = 'incremental';
    pragma auto_vacuum;
  }
} {2}
do_test incrvacuum-1.4 {
  # In this case the invalid value is ignored and the auto_vacuum
  # setting remains unchanged.
  execsql {
    pragma auto_vacuum = 'invalid';
    pragma auto_vacuum;
  }
} {2}
do_test incrvacuum-1.5 {
  execsql {
    pragma auto_vacuum = 1;
    pragma auto_vacuum;
  }
} {1}
do_test incrvacuum-1.6 {
  execsql {
    pragma auto_vacuum = '2';
    pragma auto_vacuum;
  }
} {2}
do_test incrvacuum-1.7 {
  # Invalid value. auto_vacuum setting remains unchanged.
  execsql {
    pragma auto_vacuum = 5;
    pragma auto_vacuum;
  }
} {2}

#---------------------------------------------------------------------
# Test the pragma on a non-empty database. It is possible to toggle
# the connection between "full" and "incremental" mode, but not to
# change from either of these to "none", or from "none" to "full" or
# "incremental".
#
do_test incrvacuum-2.1 {
  execsql {
    pragma auto_vacuum = 1;
    CREATE TABLE abc(a, b, c);
  }
} {}
do_test incrvacuum-2.2 {
  execsql {
    pragma auto_vacuum = 'none';
    pragma auto_vacuum;
  }
} {1}
do_test incrvacuum-2.2.1 {
  db close
  sqlite3 db test.db
  execsql {
    pragma auto_vacuum;
  }
} {1}
do_test incrvacuum-2.3 {
  execsql {
    pragma auto_vacuum = 'incremental';
    pragma auto_vacuum;
  }
} {2}
do_test incrvacuum-2.4 {
  execsql {
    pragma auto_vacuum = 'full';
    pragma auto_vacuum;
  }
} {1}

#---------------------------------------------------------------------
# Test that when the auto_vacuum mode is "incremental", the database
# does not shrink when pages are removed from it. But it does if
# the mode is set to "full".
#
do_test incrvacuum-3.1 {
  execsql {
    pragma auto_vacuum;
  }
} {1}
do_test incrvacuum-3.2 {
  set ::str [string repeat 1234567890 110]
  execsql {
    PRAGMA auto_vacuum = 2;
    BEGIN;
    CREATE TABLE tbl2(str);
    INSERT INTO tbl2 VALUES($::str);
    COMMIT;
  }
  # 5 pages:
  #
  #   1 -> database header
  #   2 -> first back-pointer page
  #   3 -> table abc
  #   4 -> table tbl2
  #   5 -> table tbl2 overflow page.
  #
  expr {[file size test.db] / 1024}
} {5}
do_test incrvacuum-3.3 {
  execsql {
    DROP TABLE abc;
    DELETE FROM tbl2;
  }
  expr {[file size test.db] / 1024}
} {5}
do_test incrvacuum-3.4 {
  execsql {
    PRAGMA auto_vacuum = 1;
    INSERT INTO tbl2 VALUES('hello world');
  }
  expr {[file size test.db] / 1024}
} {3}

#---------------------------------------------------------------------
# Try to run a very simple incremental vacuum. Also verify that 
# PRAGMA incremental_vacuum is a harmless no-op against a database that
# does not support auto-vacuum.
#
do_test incrvacuum-4.1 {
  set ::str [string repeat 1234567890 110]
  execsql {
    PRAGMA auto_vacuum = 2;
    INSERT INTO tbl2 VALUES($::str);
    CREATE TABLE tbl1(a, b, c);
  }
  expr {[file size test.db] / 1024}
} {5}
do_test incrvacuum-4.2 {
  execsql {
    DELETE FROM tbl2;
    DROP TABLE tbl1;
  }
  expr {[file size test.db] / 1024}
} {5}
do_test incrvacuum-4.3 {
  set ::nStep 0
  db eval {pragma incremental_vacuum(10)} {
    incr ::nStep
  }
  list [expr {[file size test.db] / 1024}] $::nStep
} {3 2}

#---------------------------------------------------------------------
# The following tests - incrvacuum-5.* - test incremental vacuum
# from within a transaction.
#
do_test incrvacuum-5.1.1 {
  expr {[file size test.db] / 1024}
} {3}
do_test incrvacuum-5.1.2 {
  execsql {
    BEGIN;
    DROP TABLE tbl2;
    PRAGMA incremental_vacuum;
    COMMIT;
  }
  expr {[file size test.db] / 1024}
} {1}

do_test incrvacuum-5.2.1 {
  set ::str [string repeat abcdefghij 110]
  execsql {
    BEGIN;
    CREATE TABLE tbl1(a);
    INSERT INTO tbl1 VALUES($::str);
    PRAGMA incremental_vacuum;                 -- this is a no-op.
    COMMIT;
  }
  expr {[file size test.db] / 1024}
} {4}
do_test incrvacuum-5.2.2 {
  set ::str [string repeat abcdefghij 110]
  execsql {
    BEGIN;
    INSERT INTO tbl1 VALUES($::str);
    INSERT INTO tbl1 SELECT * FROM tbl1;
    DELETE FROM tbl1 WHERE oid%2;        -- Put 2 overflow pages on free-list.
    COMMIT;
  }
  expr {[file size test.db] / 1024}
} {7}
do_test incrvacuum-5.2.3 {
  execsql {
    BEGIN;
    PRAGMA incremental_vacuum;           -- Vacuum up the two pages.
    CREATE TABLE tbl2(b);                -- Use one free page as a table root.
    INSERT INTO tbl2 VALUES('a nice string');
    COMMIT;
  }
  expr {[file size test.db] / 1024}
} {6}
do_test incrvacuum-5.2.4 {
  execsql {
    SELECT * FROM tbl2;
  }
} {{a nice string}}
do_test incrvacuum-5.2.5 {
  execsql {
    DROP TABLE tbl1;
    DROP TABLE tbl2;
    PRAGMA incremental_vacuum;
  }
  expr {[file size test.db] / 1024}
} {1}


# Test cases incrvacuum-5.3.* use the following list as input data.
# Two new databases are opened, one with incremental vacuum enabled,
# the other with no auto-vacuum completely disabled. After executing
# each element of the following list on both databases, test that
# the integrity-check passes and the contents of each are identical.
# 
set TestScriptList [list {
  BEGIN;
  CREATE TABLE t1(a, b);
  CREATE TABLE t2(a, b);
  CREATE INDEX t1_i ON t1(a);
  CREATE INDEX t2_i ON t2(a);
} {
  INSERT INTO t1 VALUES($::str1, $::str2);
  INSERT INTO t1 VALUES($::str1||$::str2, $::str2||$::str1);
  INSERT INTO t2 SELECT b, a FROM t1;
  INSERT INTO t2 SELECT a, b FROM t1;
  INSERT INTO t1 SELECT b, a FROM t2;
  UPDATE t2 SET b = '';
  PRAGMA incremental_vacuum;
} {
  UPDATE t2 SET b = (SELECT b FROM t1 WHERE t1.oid = t2.oid);
  PRAGMA incremental_vacuum;
} {
  CREATE TABLE t3(a, b);
  INSERT INTO t3 SELECT * FROM t2;
  DROP TABLE t2;
  PRAGMA incremental_vacuum;
} {
  CREATE INDEX t3_i ON t3(a);
  COMMIT;
} {
  BEGIN;
  DROP INDEX t3_i;
  PRAGMA incremental_vacuum;
  INSERT INTO t3 VALUES('hello', 'world');
  ROLLBACK;
} {
  INSERT INTO t3 VALUES('hello', 'world');
}
]

# If this build omits subqueries, step 2 in the above list will not
# work. Replace it with "" in this case. 
#
ifcapable !subquery { lset TestScriptList 2 "" }

# Compare the contents of databases $A and $B.
#
proc compare_dbs {A B tname} {
  set tbl_list [execsql {
    SELECT tbl_name FROM sqlite_master WHERE type = 'table'
  } $A]

  do_test ${tname}.1 [subst {
    execsql {
      SELECT tbl_name FROM sqlite_master WHERE type = 'table'
    } $B
  }] $tbl_list

  set tn 1
  foreach tbl $tbl_list {
    set control [execsql "SELECT * FROM $tbl" $A]
    do_test ${tname}.[incr tn] [subst {
      execsql "SELECT * FROM $tbl" $B
    }] $control
  }
}

set ::str1 [string repeat abcdefghij 130]
set ::str2 [string repeat 1234567890 105]

forcedelete test1.db test1.db-journal test2.db test2.db-journal
sqlite3 db1 test1.db
sqlite3 db2 test2.db
execsql { PRAGMA auto_vacuum = 'none' } db1
execsql { PRAGMA auto_vacuum = 'incremental' } db2

set tn 1
foreach sql $::TestScriptList {
  execsql $sql db1
  execsql $sql db2

  compare_dbs db1 db2 incrvacuum-5.3.${tn}
  do_test incrvacuum-5.3.${tn}.integrity1 {
    execsql { PRAGMA integrity_check; } db1
  } {ok}
  do_test incrvacuum-5.3.${tn}.integrity2 {
    execsql { PRAGMA integrity_check; } db2
  } {ok}
  incr tn
}
db1 close
db2 close
#
# End of test cases 5.3.*

#---------------------------------------------------------------------
# The following tests - incrvacuum-6.* - test running incremental 
# vacuum while another statement (a read) is being executed.
#
for {set jj 0} {$jj < 10} {incr jj} {
  # Build some test data. Two tables are created in an empty
  # database. tbl1 data is a contiguous block starting at page 5 (pages
  # 3 and 4 are the table roots). tbl2 is a contiguous block starting 
  # right after tbl1.
  #
  # Then drop tbl1 so that when an incr vacuum is run the pages
  # of tbl2 have to be moved to fill the gap.
  #
  do_test incrvacuum-6.${jj}.1 {
    execsql {
      DROP TABLE IF EXISTS tbl1;
      DROP TABLE IF EXISTS tbl2;
      PRAGMA incremental_vacuum;
      CREATE TABLE tbl1(a, b);
      CREATE TABLE tbl2(a, b);
      BEGIN;
    }
    for {set ii 0} {$ii < 1000} {incr ii} {
      db eval {INSERT INTO tbl1 VALUES($ii, $ii || $ii)}
    }
    execsql {
      INSERT INTO tbl2 SELECT * FROM tbl1;
      COMMIT;
      DROP TABLE tbl1;
    }
    expr {[file size test.db] / 1024}
  } {36}

  # Run a linear scan query on tbl2. After reading ($jj*100) rows, 
  # run the incremental vacuum to shrink the database.
  #
  do_test incrvacuum-6.${jj}.2 {
    set ::nRow 0
    db eval {SELECT a FROM tbl2} {} {
      if {$a == [expr $jj*100]} {
        db eval {PRAGMA incremental_vacuum}
      }
      incr ::nRow
    }
    list [expr {[file size test.db] / 1024}] $nRow
  } {19 1000}
}

#---------------------------------------------------------------------
# This test - incrvacuum-7.* - is to check that the database can be
# written in the middle of an incremental vacuum.
#
set ::iWrite 1
while 1 {
  do_test incrvacuum-7.${::iWrite}.1 {
    execsql {
      DROP TABLE IF EXISTS tbl1;
      DROP TABLE IF EXISTS tbl2;
      PRAGMA incremental_vacuum;
      CREATE TABLE tbl1(a, b);
      CREATE TABLE tbl2(a, b);
      BEGIN;
    }
    for {set ii 0} {$ii < 1000} {incr ii} {
      db eval {INSERT INTO tbl1 VALUES($ii, $ii || $ii)}
    }
    execsql {
      INSERT INTO tbl2 SELECT * FROM tbl1;
      COMMIT;
      DROP TABLE tbl1;
    }
    expr {[file size test.db] / 1024}
  } {36}

  do_test incrvacuum-7.${::iWrite}.2 {
    set ::nRow 0
    db eval {PRAGMA incremental_vacuum} {
      incr ::nRow
      if {$::nRow == $::iWrite} {
        db eval {
          CREATE TABLE tbl1(a, b);
          INSERT INTO tbl1 VALUES('hello', 'world');
        }
      }
    }
    list [expr {[file size test.db] / 1024}]
  } {20}

  do_test incrvacuum-7.${::iWrite}.3 {
    execsql {
      SELECT * FROM tbl1;
    }
  } {hello world}

  if {$::nRow == $::iWrite} break
  incr ::iWrite
}

#---------------------------------------------------------------------
# This test - incrvacuum-8.* - is to check that nothing goes wrong
# with an incremental-vacuum if it is the first statement executed
# after an existing database is opened.
#
# At one point, this would always return SQLITE_SCHEMA (which 
# causes an infinite loop in tclsqlite.c if using the Tcl interface).
#
do_test incrvacuum-8.1 {
  db close
  sqlite3 db test.db
  execsql {
    PRAGMA incremental_vacuum(50);
  }
} {}

#---------------------------------------------------------------------
# At one point this test case was causing an assert() to fail.
#
do_test incrvacuum-9.1 {
  db close
  forcedelete test.db test.db-journal
  sqlite3 db test.db

  execsql {
    PRAGMA auto_vacuum = 'incremental';
    CREATE TABLE t1(a, b, c);
    CREATE TABLE t2(a, b, c);
    INSERT INTO t2 VALUES(randstr(500,500),randstr(500,500),randstr(500,500));
    INSERT INTO t1 VALUES(1, 2, 3);
    INSERT INTO t1 SELECT a||a, b||b, c||c FROM t1;
    INSERT INTO t1 SELECT a||a, b||b, c||c FROM t1;
    INSERT INTO t1 SELECT a||a, b||b, c||c FROM t1;
    INSERT INTO t1 SELECT a||a, b||b, c||c FROM t1;
    INSERT INTO t1 SELECT a||a, b||b, c||c FROM t1;
    INSERT INTO t1 SELECT a||a, b||b, c||c FROM t1;
    INSERT INTO t1 SELECT a||a, b||b, c||c FROM t1;
    INSERT INTO t1 SELECT a||a, b||b, c||c FROM t1;
  }
} {}

do_test incrvacuum-9.2 {
  execsql {
    PRAGMA synchronous = 'OFF';
    BEGIN;
    UPDATE t1 SET a = a, b = b, c = c;
    DROP TABLE t2;
    PRAGMA incremental_vacuum(10);
    ROLLBACK;
  }
} {}

do_test incrvacuum-9.3 {
  execsql {
    PRAGMA cache_size = 10;
    BEGIN;
    UPDATE t1 SET a = a, b = b, c = c;
    DROP TABLE t2;
    PRAGMA incremental_vacuum(10);
    ROLLBACK;
  }
} {}

#---------------------------------------------------------------------
# Test that the parameter to the incremental_vacuum pragma works. That
# is, if the user executes "PRAGMA incremental_vacuum(N)", at most
# N pages are vacuumed.
#
do_test incrvacuum-10.1 {
  execsql {
    DROP TABLE t1;
    DROP TABLE t2;
  }
  expr [file size test.db] / 1024
} {29}

do_test incrvacuum-10.2 {
  execsql {
    PRAGMA incremental_vacuum(1);
  }
  expr [file size test.db] / 1024
} {28}

do_test incrvacuum-10.3 {
  execsql {
    PRAGMA incremental_vacuum(5);
  }
  expr [file size test.db] / 1024
} {23}

do_test incrvacuum-10.4 {
  execsql {
    PRAGMA incremental_vacuum('1');
  }
  expr [file size test.db] / 1024
} {22}

do_test incrvacuum-10.5 {
  execsql {
    PRAGMA incremental_vacuum("+3");
  }
  expr [file size test.db] / 1024
} {19}

do_test incrvacuum-10.6 {
  execsql {
    PRAGMA incremental_vacuum = 1;
  }
  expr [file size test.db] / 1024
} {18}

do_test incrvacuum-10.7 {
  # Use a really big number as an argument to incremetal_vacuum. Should
  # be interpreted as "free all possible space".
  execsql {
    PRAGMA incremental_vacuum(2147483649);
  }
  expr [file size test.db] / 1024
} {1}

do_test incrvacuum-10.8 {
  execsql {
    CREATE TABLE t1(x);
    INSERT INTO t1 VALUES(hex(randomblob(1000)));
    DROP TABLE t1;
  }
  # A negative number means free all possible space.
  execsql {
    PRAGMA incremental_vacuum=-1;
  }
  expr [file size test.db] / 1024
} {1}

#----------------------------------------------------------------
# Test that if we set the auto_vacuum mode to 'incremental', then
# create a database, thereafter that database defaults to incremental 
# vacuum mode.
#
db close
forcedelete test.db test.db-journal
sqlite3 db test.db

ifcapable default_autovacuum {
  do_test incrvacuum-11.1-av-dflt-on {
    execsql {
      PRAGMA auto_vacuum;
    }
  } $AUTOVACUUM
} else {
  do_test incrvacuum-11.1-av-dflt-off {
    execsql {
      PRAGMA auto_vacuum;
    }
  } {0}
}
do_test incrvacuum-11.2 {
  execsql {
    PRAGMA auto_vacuum = incremental;
  }
} {}
do_test incrvacuum-11.3 {
  execsql {
    PRAGMA auto_vacuum;
  }
} {2}
do_test incrvacuum-11.4 {
  # The database has now been created.
  expr {[file size test.db]>0}
} {1}
do_test incrvacuum-11.5 {
  # Close and reopen the connection.
  db close
  sqlite3 db test.db

  # Test we are still in incremental vacuum mode.
  execsql { PRAGMA auto_vacuum; }
} {2}
do_test incrvacuum-11.6 {
  execsql {
    PRAGMA auto_vacuum = 'full';
    PRAGMA auto_vacuum;
  }
} {1}
do_test incrvacuum-11.7 {
  # Close and reopen the connection.
  db close
  sqlite3 db test.db

  # Test we are still in "full" auto-vacuum mode.
  execsql { PRAGMA auto_vacuum; }
} {1}

#----------------------------------------------------------------------
# Special case: What happens if the database is locked when a "PRAGMA
# auto_vacuum = XXX" statement is executed.
#
db close
forcedelete test.db test.db-journal
sqlite3 db test.db

do_test incrvacuum-12.1 {
  execsql {
    PRAGMA auto_vacuum = 1;
  }
  expr {[file size test.db]>0}
} {1}

# Try to change the auto-vacuum from "full" to "incremental" while the
# database is locked. Nothing should change.
#
do_test incrvacuum-12.2 {
  sqlite3 db2 test.db
  execsql { BEGIN EXCLUSIVE; } db2
  catchsql { PRAGMA auto_vacuum = 2; }
} {1 {database is locked}}

do_test incrvacuum-12.3 {
  execsql { ROLLBACK; } db2
  execsql { PRAGMA auto_vacuum }
} {2}   ;# Still 2 because PRAGMA auto_vacuum setting held in case of vacuum
do_test incrvacuum-12.4 {
  db close
  sqlite3 db test.db
  execsql { PRAGMA auto_vacuum }
} {1}   ;# Revert to 1 because the database file did not change

do_test incrvacuum-12.5 {
  execsql { SELECT * FROM sqlite_master }
  execsql { PRAGMA auto_vacuum }
} {1}

#----------------------------------------------------------------------
# Special case #2: What if one process prepares a "PRAGMA auto_vacuum = XXX"
# statement when the database is empty, but doesn't execute it until
# after some other process has created the database.
#
db2 close
db close
forcedelete test.db test.db-journal
sqlite3 db test.db  ;  set ::DB [sqlite3_connection_pointer db]
sqlite3 db2 test.db

do_test incrvacuum-13.1 {
  # File size is sometimes 1 instead of 0 due to the hack we put in
  # to work around ticket #3260.  Search for comments on #3260 in
  # os_unix.c.
  expr {[file size test.db]>1}
} {0}
do_test incrvacuum-13.2 {
  set ::STMT [sqlite3_prepare $::DB {PRAGMA auto_vacuum = 2} -1 DUMMY]
  execsql {
    PRAGMA auto_vacuum = none;
    PRAGMA default_cache_size = 1024;
    PRAGMA auto_vacuum;
  } db2
} {0}
do_test incrvacuum-13.3 {
  expr {[file size test.db]>0}
} {1}
do_test incrvacuum-13.4 {
  set rc [sqlite3_step $::STMT]
  list $rc [sqlite3_finalize $::STMT]
} {SQLITE_DONE SQLITE_OK}
do_test incrvacuum-13.5 {
  execsql {
    PRAGMA auto_vacuum;
  }
} {0}


# Verify that the incremental_vacuum pragma fails gracefully if it
# is used against an invalid database file.
#
if {[permutation] == ""} {
  do_test incrvacuum-14.1 {
    set out [open invalid.db w]
    puts $out "This is not an SQLite database file"
    close $out
    sqlite3 db3 invalid.db
    catchsql {
      PRAGMA incremental_vacuum(10);
    } db3
  } {1 {file is not a database}}
  db3 close
}

do_test incrvacuum-15.1 {
  db close
  db2 close
  forcedelete test.db
  sqlite3 db test.db

  set str [string repeat "abcdefghij" 500]

  execsql {
    PRAGMA cache_size = 10;
    PRAGMA auto_vacuum = incremental;
    CREATE TABLE t1(x, y);
    INSERT INTO t1 VALUES('a', $str);
    INSERT INTO t1 VALUES('b', $str);
    INSERT INTO t1 VALUES('c', $str);
    INSERT INTO t1 VALUES('d', $str);
    INSERT INTO t1 VALUES('e', $str);
    INSERT INTO t1 VALUES('f', $str);
    INSERT INTO t1 VALUES('g', $str);
    INSERT INTO t1 VALUES('h', $str);
    INSERT INTO t1 VALUES('i', $str);
    INSERT INTO t1 VALUES('j', $str);
    INSERT INTO t1 VALUES('j', $str);

    CREATE TABLE t2(x PRIMARY KEY, y);
    INSERT INTO t2 VALUES('a', $str);
    INSERT INTO t2 VALUES('b', $str);
    INSERT INTO t2 VALUES('c', $str);
    INSERT INTO t2 VALUES('d', $str);

    BEGIN;
      DELETE FROM t2;
      PRAGMA incremental_vacuum;
  }

  catchsql {INSERT INTO t2 SELECT * FROM t1}

  execsql { 
    COMMIT;
    PRAGMA integrity_check;
  }
} {ok}

#-------------------------------------------------------------------------
# At one point it was unsafe to truncate a db file on windows while there
# were outstanding xFetch() references. This test case attempts to hit
# that case.
#
ifcapable mmap {
  reset_db
  do_execsql_test incrvacuum-16.0 {
    PRAGMA auto_vacuum = 2;
    CREATE TABLE t3(a);
    INSERT INTO t3 VALUES(1), (2), (3), (4);
  
    CREATE TABLE t2(x);
    INSERT INTO t2 VALUES( randomblob(1000) );
    INSERT INTO t2 VALUES( randomblob(1000) );
    INSERT INTO t2 VALUES( randomblob(1000) );
    INSERT INTO t2 VALUES( randomblob(1000) );
    INSERT INTO t2 VALUES( randomblob(1000) );
    INSERT INTO t2 VALUES( randomblob(1000) );
  } {}
  
  # Reopen db to ensure the page-cache is empty.
  #
  db close
  sqlite3 db test.db
  
  # Open db in mmap-mode. Open a transaction, delete some data, then run
  # incremental-vacuum. Do not commit the transaction. 
  #
  do_execsql_test incrvacuum-16.1 {
    PRAGMA mmap_size = 1000000;
    BEGIN;
    DELETE FROM t2;
    PRAGMA incremental_vacuum = 1000;
  } {1000000}

  # Scan through table t3 (which is all clean pages - so mmap is used). Then,
  # midway through, commit the transaction. This causes the db to be truncated
  # while there are outstanding xFetch pages.
  #
  do_test incrvacuum-16.2 {
    set res [list]
    db eval { SELECT a FROM t3 } {
      if {$a==3} { db eval COMMIT }
      lappend res $a
    }
    set res
  } {1 2 3 4}
}

# 2021-04-05 dbsqlfuzz cced0668cfd4da4eb2382cb9dd26c17c64aaff76
#
# This is an incremental vacuum database that has one free page that
# needs to be filled.  After removing the last page from the end of
# the database file to fill the free page slot, the last page that
# is left is the tail of an overflow chain.
#
# But the size of the database file is shorter than the actual data
# so that after incremental vacuum runs, the file is actually too
# small to hold the last page of the overflow chain.
#
# At one point this caused an assertion fault in 
# sqlite3PagerTruncateImage().
#
do_test incrvacuum-17.0 {
  sqlite3 db {}
  database_may_be_corrupt
  db deserialize [decode_hexdb {
| size 20480 pagesize 4096 filename x2.db
| page 1 offset 0
|      0: 53 51 4c 69 74 65 20 66 6f 72 6d 61 74 20 33 00   SQLite format 3.
|     16: 10 00 01 01 00 40 20 20 00 00 00 05 00 00 00 07   .....@  ........
|     32: 00 00 00 04 00 00 00 01 00 00 00 03 00 00 00 04   ................
|     48: 00 00 00 00 00 00 00 03 00 00 00 01 00 00 00 00   ................
|     64: 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00   ................
|     80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 05   ................
|     96: 00 2e 53 60 0d 0f dc 00 01 0f b8 00 0f b8 0f b8   ..S`............
|   4016: 00 00 00 00 00 00 00 00 22 02 06 17 11 11 01 31   ...............1
|   4032: 74 61 62 6c 65 74 32 74 32 03 43 52 45 41 54 45   tablet2t2.CREATE
|   4048: 20 54 41 42 4c 45 20 74 32 28 79 29 00 00 00 24    TABLE t2(y)...$
|   4064: 11 11 01 31 74 61 62 6c 65 74 31 74 31 03 43 52   ...1tablet1t1.CR
|   4080: 45 41 54 45 20 54 41 42 4c 45 20 74 31 28 78 29   EATE TABLE t1(x)
| page 2 offset 4096
|      0: 01 00 00 00 00 02 00 00 00 00 03 00 00 00 03 04   ................
|     16: 00 00 00 05 03 00 00 00 03 00 00 00 00 00 00 00   ................
| page 3 offset 8192
|      0: 0d 00 00 00 02 05 47 00 08 dd 05 47 00 00 00 00   ......G....G....
|   1344: 00 00 00 00 00 00 00 a7 0b 02 03 ce 1c 00 00 00   ................
|   2256: 00 00 00 00 00 00 00 00 00 00 00 00 07 ce 14 01   ................
|   2272: 04 81 9c 2c 00 00 00 00 00 00 00 00 00 00 00 00   ...,............
|   4080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 05   ................
| page 4 offset 12288
|      0: 00 00 00 00 00 00 00 00 08 dd 05 47 00 00 00 00   ...........G....
|   1344: 00 00 00 00 00 00 00 a7 0b 02 03 ce 1c 00 00 00   ................
|   2256: 00 00 00 00 00 00 00 00 00 00 00 00 07 ce 14 01   ................
|   2272: 04 81 9c 2c 00 00 00 00 00 00 00 00 00 00 00 00   ...,............
|   4080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 05   ................
| page 5 offset 16384
|      0: 00 00 00 06 00 00 00 00 00 00 00 00 00 00 00 00   ................
| end x2.db
}]} {}
do_catchsql_test incrvacuum-17.1 {
  PRAGMA writable_schema=ON;
  PRAGMA incremental_vacuum(10);
} {0 {}}

finish_test