# NOTE: Assertions have been autogenerated by utils/update_mca_test_checks.py
# RUN: llvm-mca -mtriple=x86_64-unknown-unknown -mcpu=bdver2 -scheduler-stats -dispatch-stats -iterations=100 -timeline -timeline-max-iterations=1 < %s | FileCheck %s
# LLVM-MCA-BEGIN
, %spl
, %bpl
, %sil
, %dil
# LLVM-MCA-END
# LLVM-MCA-BEGIN
, %sp
, %bp
, %si
, %di
# LLVM-MCA-END
# LLVM-MCA-BEGIN
, %esp
, %ebp
, %esi
, %edi
# LLVM-MCA-END
# LLVM-MCA-BEGIN
, %rsp
, %rbp
, %rsi
, %rdi
# LLVM-MCA-END
# LLVM-MCA-BEGIN
, %mm0
, %mm1
, %mm2
, %mm3
# LLVM-MCA-END
# LLVM-MCA-BEGIN
, %xmm0
, %xmm1
, %xmm2
, %xmm3
# LLVM-MCA-END
# LLVM-MCA-BEGIN
, %ymm0
, %ymm1
, %ymm2
, %ymm3
# LLVM-MCA-END
# CHECK: [0] Code Region
# CHECK: Iterations: 100
# CHECK-NEXT: Instructions: 400
# CHECK-NEXT: Total Cycles: 406
# CHECK-NEXT: Total uOps: 400
# CHECK: Dispatch Width: 4
# CHECK-NEXT: uOps Per Cycle: 0.99
# CHECK-NEXT: IPC: 0.99
# CHECK-NEXT: Block RThroughput: 4.0
# CHECK: Instruction Info:
# CHECK-NEXT: [1]: #uOps
# CHECK-NEXT: [2]: Latency
# CHECK-NEXT: [3]: RThroughput
# CHECK-NEXT: [4]: MayLoad
# CHECK-NEXT: [5]: MayStore
# CHECK-NEXT: [6]: HasSideEffects (U)
# CHECK: [1] [2] [3] [4] [5] [6] Instructions:
# CHECK-NEXT: 1 5 1.00 * movb (%rax), %spl
# CHECK-NEXT: 1 5 1.00 * movb (%rcx), %bpl
# CHECK-NEXT: 1 5 1.00 * movb (%rdx), %sil
# CHECK-NEXT: 1 5 1.00 * movb (%rbx), %dil
# CHECK: Dynamic Dispatch Stall Cycles:
# CHECK-NEXT: RAT - Register unavailable: 0
# CHECK-NEXT: RCU - Retire tokens unavailable: 0
# CHECK-NEXT: SCHEDQ - Scheduler full: 0
# CHECK-NEXT: LQ - Load queue full: 354 (87.2%)
# CHECK-NEXT: SQ - Store queue full: 0
# CHECK-NEXT: GROUP - Static restrictions on the dispatch group: 0
# CHECK-NEXT: USH - Uncategorised Structural Hazard: 0
# CHECK: Dispatch Logic - number of cycles where we saw N micro opcodes dispatched:
# CHECK-NEXT: [# dispatched], [# cycles]
# CHECK-NEXT: 0, 217 (53.4%)
# CHECK-NEXT: 2, 178 (43.8%)
# CHECK-NEXT: 4, 11 (2.7%)
# CHECK: Schedulers - number of cycles where we saw N micro opcodes issued:
# CHECK-NEXT: [# issued], [# cycles]
# CHECK-NEXT: 0, 206 (50.7%)
# CHECK-NEXT: 2, 200 (49.3%)
# CHECK: Scheduler's queue usage:
# CHECK-NEXT: [1] Resource name.
# CHECK-NEXT: [2] Average number of used buffer entries.
# CHECK-NEXT: [3] Maximum number of used buffer entries.
# CHECK-NEXT: [4] Total number of buffer entries.
# CHECK: [1] [2] [3] [4]
# CHECK-NEXT: PdEX 31 34 40
# CHECK-NEXT: PdFPU 0 0 64
# CHECK-NEXT: PdLoad 36 40 40
# CHECK-NEXT: PdStore 0 0 24
# CHECK: Resources:
# CHECK-NEXT: [0.0] - PdAGLU01
# CHECK-NEXT: [0.1] - PdAGLU01
# CHECK-NEXT: [1] - PdBranch
# CHECK-NEXT: [2] - PdCount
# CHECK-NEXT: [3] - PdDiv
# CHECK-NEXT: [4] - PdEX0
# CHECK-NEXT: [5] - PdEX1
# CHECK-NEXT: [6] - PdFPCVT
# CHECK-NEXT: [7.0] - PdFPFMA
# CHECK-NEXT: [7.1] - PdFPFMA
# CHECK-NEXT: [8.0] - PdFPMAL
# CHECK-NEXT: [8.1] - PdFPMAL
# CHECK-NEXT: [9] - PdFPMMA
# CHECK-NEXT: [10] - PdFPSTO
# CHECK-NEXT: [11] - PdFPU0
# CHECK-NEXT: [12] - PdFPU1
# CHECK-NEXT: [13] - PdFPU2
# CHECK-NEXT: [14] - PdFPU3
# CHECK-NEXT: [15] - PdFPXBR
# CHECK-NEXT: [16.0] - PdLoad
# CHECK-NEXT: [16.1] - PdLoad
# CHECK-NEXT: [17] - PdMul
# CHECK-NEXT: [18] - PdStore
# CHECK: Resource pressure per iteration:
# CHECK-NEXT: [0.0] [0.1] [1] [2] [3] [4] [5] [6] [7.0] [7.1] [8.0] [8.1] [9] [10] [11] [12] [13] [14] [15] [16.0] [16.1] [17] [18]
# CHECK-NEXT: 4.00 4.00 - - - - - - - - - - - - - - - - - 4.00 4.00 - -
# CHECK: Resource pressure by instruction:
# CHECK-NEXT: [0.0] [0.1] [1] [2] [3] [4] [5] [6] [7.0] [7.1] [8.0] [8.1] [9] [10] [11] [12] [13] [14] [15] [16.0] [16.1] [17] [18] Instructions:
# CHECK-NEXT: - 2.00 - - - - - - - - - - - - - - - - - - 2.00 - - movb (%rax), %spl
# CHECK-NEXT: 2.00 - - - - - - - - - - - - - - - - - - 2.00 - - - movb (%rcx), %bpl
# CHECK-NEXT: - 2.00 - - - - - - - - - - - - - - - - - - 2.00 - - movb (%rdx), %sil
# CHECK-NEXT: 2.00 - - - - - - - - - - - - - - - - - - 2.00 - - - movb (%rbx), %dil
# CHECK: Timeline view:
# CHECK-NEXT: Index 0123456789
# CHECK: [0,0] DeeeeeER . movb (%rax), %spl
# CHECK-NEXT: [0,1] DeeeeeER . movb (%rcx), %bpl
# CHECK-NEXT: [0,2] D==eeeeeER movb (%rdx), %sil
# CHECK-NEXT: [0,3] D==eeeeeER movb (%rbx), %dil
# CHECK: Average Wait times (based on the timeline view):
# CHECK-NEXT: [0]: Executions
# CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue
# CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready
# CHECK-NEXT: [3]: Average time elapsed from WB until retire stage
# CHECK: [0] [1] [2] [3]
# CHECK-NEXT: 0. 1 1.0 1.0 0.0 movb (%rax), %spl
# CHECK-NEXT: 1. 1 1.0 1.0 0.0 movb (%rcx), %bpl
# CHECK-NEXT: 2. 1 3.0 3.0 0.0 movb (%rdx), %sil
# CHECK-NEXT: 3. 1 3.0 3.0 0.0 movb (%rbx), %dil
# CHECK-NEXT: 1 2.0 2.0 0.0 <total>
# CHECK: [1] Code Region
# CHECK: Iterations: 100
# CHECK-NEXT: Instructions: 400
# CHECK-NEXT: Total Cycles: 406
# CHECK-NEXT: Total uOps: 400
# CHECK: Dispatch Width: 4
# CHECK-NEXT: uOps Per Cycle: 0.99
# CHECK-NEXT: IPC: 0.99
# CHECK-NEXT: Block RThroughput: 4.0
# CHECK: Instruction Info:
# CHECK-NEXT: [1]: #uOps
# CHECK-NEXT: [2]: Latency
# CHECK-NEXT: [3]: RThroughput
# CHECK-NEXT: [4]: MayLoad
# CHECK-NEXT: [5]: MayStore
# CHECK-NEXT: [6]: HasSideEffects (U)
# CHECK: [1] [2] [3] [4] [5] [6] Instructions:
# CHECK-NEXT: 1 5 1.00 * movw (%rax), %sp
# CHECK-NEXT: 1 5 1.00 * movw (%rcx), %bp
# CHECK-NEXT: 1 5 1.00 * movw (%rdx), %si
# CHECK-NEXT: 1 5 1.00 * movw (%rbx), %di
# CHECK: Dynamic Dispatch Stall Cycles:
# CHECK-NEXT: RAT - Register unavailable: 0
# CHECK-NEXT: RCU - Retire tokens unavailable: 0
# CHECK-NEXT: SCHEDQ - Scheduler full: 0
# CHECK-NEXT: LQ - Load queue full: 354 (87.2%)
# CHECK-NEXT: SQ - Store queue full: 0
# CHECK-NEXT: GROUP - Static restrictions on the dispatch group: 0
# CHECK-NEXT: USH - Uncategorised Structural Hazard: 0
# CHECK: Dispatch Logic - number of cycles where we saw N micro opcodes dispatched:
# CHECK-NEXT: [# dispatched], [# cycles]
# CHECK-NEXT: 0, 217 (53.4%)
# CHECK-NEXT: 2, 178 (43.8%)
# CHECK-NEXT: 4, 11 (2.7%)
# CHECK: Schedulers - number of cycles where we saw N micro opcodes issued:
# CHECK-NEXT: [# issued], [# cycles]
# CHECK-NEXT: 0, 206 (50.7%)
# CHECK-NEXT: 2, 200 (49.3%)
# CHECK: Scheduler's queue usage:
# CHECK-NEXT: [1] Resource name.
# CHECK-NEXT: [2] Average number of used buffer entries.
# CHECK-NEXT: [3] Maximum number of used buffer entries.
# CHECK-NEXT: [4] Total number of buffer entries.
# CHECK: [1] [2] [3] [4]
# CHECK-NEXT: PdEX 31 34 40
# CHECK-NEXT: PdFPU 0 0 64
# CHECK-NEXT: PdLoad 36 40 40
# CHECK-NEXT: PdStore 0 0 24
# CHECK: Resources:
# CHECK-NEXT: [0.0] - PdAGLU01
# CHECK-NEXT: [0.1] - PdAGLU01
# CHECK-NEXT: [1] - PdBranch
# CHECK-NEXT: [2] - PdCount
# CHECK-NEXT: [3] - PdDiv
# CHECK-NEXT: [4] - PdEX0
# CHECK-NEXT: [5] - PdEX1
# CHECK-NEXT: [6] - PdFPCVT
# CHECK-NEXT: [7.0] - PdFPFMA
# CHECK-NEXT: [7.1] - PdFPFMA
# CHECK-NEXT: [8.0] - PdFPMAL
# CHECK-NEXT: [8.1] - PdFPMAL
# CHECK-NEXT: [9] - PdFPMMA
# CHECK-NEXT: [10] - PdFPSTO
# CHECK-NEXT: [11] - PdFPU0
# CHECK-NEXT: [12] - PdFPU1
# CHECK-NEXT: [13] - PdFPU2
# CHECK-NEXT: [14] - PdFPU3
# CHECK-NEXT: [15] - PdFPXBR
# CHECK-NEXT: [16.0] - PdLoad
# CHECK-NEXT: [16.1] - PdLoad
# CHECK-NEXT: [17] - PdMul
# CHECK-NEXT: [18] - PdStore
# CHECK: Resource pressure per iteration:
# CHECK-NEXT: [0.0] [0.1] [1] [2] [3] [4] [5] [6] [7.0] [7.1] [8.0] [8.1] [9] [10] [11] [12] [13] [14] [15] [16.0] [16.1] [17] [18]
# CHECK-NEXT: 4.00 4.00 - - - - - - - - - - - - - - - - - 4.00 4.00 - -
# CHECK: Resource pressure by instruction:
# CHECK-NEXT: [0.0] [0.1] [1] [2] [3] [4] [5] [6] [7.0] [7.1] [8.0] [8.1] [9] [10] [11] [12] [13] [14] [15] [16.0] [16.1] [17] [18] Instructions:
# CHECK-NEXT: - 2.00 - - - - - - - - - - - - - - - - - - 2.00 - - movw (%rax), %sp
# CHECK-NEXT: 2.00 - - - - - - - - - - - - - - - - - - 2.00 - - - movw (%rcx), %bp
# CHECK-NEXT: - 2.00 - - - - - - - - - - - - - - - - - - 2.00 - - movw (%rdx), %si
# CHECK-NEXT: 2.00 - - - - - - - - - - - - - - - - - - 2.00 - - - movw (%rbx), %di
# CHECK: Timeline view:
# CHECK-NEXT: Index 0123456789
# CHECK: [0,0] DeeeeeER . movw (%rax), %sp
# CHECK-NEXT: [0,1] DeeeeeER . movw (%rcx), %bp
# CHECK-NEXT: [0,2] D==eeeeeER movw (%rdx), %si
# CHECK-NEXT: [0,3] D==eeeeeER movw (%rbx), %di
# CHECK: Average Wait times (based on the timeline view):
# CHECK-NEXT: [0]: Executions
# CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue
# CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready
# CHECK-NEXT: [3]: Average time elapsed from WB until retire stage
# CHECK: [0] [1] [2] [3]
# CHECK-NEXT: 0. 1 1.0 1.0 0.0 movw (%rax), %sp
# CHECK-NEXT: 1. 1 1.0 1.0 0.0 movw (%rcx), %bp
# CHECK-NEXT: 2. 1 3.0 3.0 0.0 movw (%rdx), %si
# CHECK-NEXT: 3. 1 3.0 3.0 0.0 movw (%rbx), %di
# CHECK-NEXT: 1 2.0 2.0 0.0 <total>
# CHECK: [2] Code Region
# CHECK: Iterations: 100
# CHECK-NEXT: Instructions: 400
# CHECK-NEXT: Total Cycles: 406
# CHECK-NEXT: Total uOps: 400
# CHECK: Dispatch Width: 4
# CHECK-NEXT: uOps Per Cycle: 0.99
# CHECK-NEXT: IPC: 0.99
# CHECK-NEXT: Block RThroughput: 4.0
# CHECK: Instruction Info:
# CHECK-NEXT: [1]: #uOps
# CHECK-NEXT: [2]: Latency
# CHECK-NEXT: [3]: RThroughput
# CHECK-NEXT: [4]: MayLoad
# CHECK-NEXT: [5]: MayStore
# CHECK-NEXT: [6]: HasSideEffects (U)
# CHECK: [1] [2] [3] [4] [5] [6] Instructions:
# CHECK-NEXT: 1 5 1.00 * movl (%rax), %esp
# CHECK-NEXT: 1 5 1.00 * movl (%rcx), %ebp
# CHECK-NEXT: 1 5 1.00 * movl (%rdx), %esi
# CHECK-NEXT: 1 5 1.00 * movl (%rbx), %edi
# CHECK: Dynamic Dispatch Stall Cycles:
# CHECK-NEXT: RAT - Register unavailable: 0
# CHECK-NEXT: RCU - Retire tokens unavailable: 0
# CHECK-NEXT: SCHEDQ - Scheduler full: 0
# CHECK-NEXT: LQ - Load queue full: 354 (87.2%)
# CHECK-NEXT: SQ - Store queue full: 0
# CHECK-NEXT: GROUP - Static restrictions on the dispatch group: 0
# CHECK-NEXT: USH - Uncategorised Structural Hazard: 0
# CHECK: Dispatch Logic - number of cycles where we saw N micro opcodes dispatched:
# CHECK-NEXT: [# dispatched], [# cycles]
# CHECK-NEXT: 0, 217 (53.4%)
# CHECK-NEXT: 2, 178 (43.8%)
# CHECK-NEXT: 4, 11 (2.7%)
# CHECK: Schedulers - number of cycles where we saw N micro opcodes issued:
# CHECK-NEXT: [# issued], [# cycles]
# CHECK-NEXT: 0, 206 (50.7%)
# CHECK-NEXT: 2, 200 (49.3%)
# CHECK: Scheduler's queue usage:
# CHECK-NEXT: [1] Resource name.
# CHECK-NEXT: [2] Average number of used buffer entries.
# CHECK-NEXT: [3] Maximum number of used buffer entries.
# CHECK-NEXT: [4] Total number of buffer entries.
# CHECK: [1] [2] [3] [4]
# CHECK-NEXT: PdEX 31 34 40
# CHECK-NEXT: PdFPU 0 0 64
# CHECK-NEXT: PdLoad 36 40 40
# CHECK-NEXT: PdStore 0 0 24
# CHECK: Resources:
# CHECK-NEXT: [0.0] - PdAGLU01
# CHECK-NEXT: [0.1] - PdAGLU01
# CHECK-NEXT: [1] - PdBranch
# CHECK-NEXT: [2] - PdCount
# CHECK-NEXT: [3] - PdDiv
# CHECK-NEXT: [4] - PdEX0
# CHECK-NEXT: [5] - PdEX1
# CHECK-NEXT: [6] - PdFPCVT
# CHECK-NEXT: [7.0] - PdFPFMA
# CHECK-NEXT: [7.1] - PdFPFMA
# CHECK-NEXT: [8.0] - PdFPMAL
# CHECK-NEXT: [8.1] - PdFPMAL
# CHECK-NEXT: [9] - PdFPMMA
# CHECK-NEXT: [10] - PdFPSTO
# CHECK-NEXT: [11] - PdFPU0
# CHECK-NEXT: [12] - PdFPU1
# CHECK-NEXT: [13] - PdFPU2
# CHECK-NEXT: [14] - PdFPU3
# CHECK-NEXT: [15] - PdFPXBR
# CHECK-NEXT: [16.0] - PdLoad
# CHECK-NEXT: [16.1] - PdLoad
# CHECK-NEXT: [17] - PdMul
# CHECK-NEXT: [18] - PdStore
# CHECK: Resource pressure per iteration:
# CHECK-NEXT: [0.0] [0.1] [1] [2] [3] [4] [5] [6] [7.0] [7.1] [8.0] [8.1] [9] [10] [11] [12] [13] [14] [15] [16.0] [16.1] [17] [18]
# CHECK-NEXT: 4.00 4.00 - - - - - - - - - - - - - - - - - 4.00 4.00 - -
# CHECK: Resource pressure by instruction:
# CHECK-NEXT: [0.0] [0.1] [1] [2] [3] [4] [5] [6] [7.0] [7.1] [8.0] [8.1] [9] [10] [11] [12] [13] [14] [15] [16.0] [16.1] [17] [18] Instructions:
# CHECK-NEXT: - 2.00 - - - - - - - - - - - - - - - - - - 2.00 - - movl (%rax), %esp
# CHECK-NEXT: 2.00 - - - - - - - - - - - - - - - - - - 2.00 - - - movl (%rcx), %ebp
# CHECK-NEXT: - 2.00 - - - - - - - - - - - - - - - - - - 2.00 - - movl (%rdx), %esi
# CHECK-NEXT: 2.00 - - - - - - - - - - - - - - - - - - 2.00 - - - movl (%rbx), %edi
# CHECK: Timeline view:
# CHECK-NEXT: Index 0123456789
# CHECK: [0,0] DeeeeeER . movl (%rax), %esp
# CHECK-NEXT: [0,1] DeeeeeER . movl (%rcx), %ebp
# CHECK-NEXT: [0,2] D==eeeeeER movl (%rdx), %esi
# CHECK-NEXT: [0,3] D==eeeeeER movl (%rbx), %edi
# CHECK: Average Wait times (based on the timeline view):
# CHECK-NEXT: [0]: Executions
# CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue
# CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready
# CHECK-NEXT: [3]: Average time elapsed from WB until retire stage
# CHECK: [0] [1] [2] [3]
# CHECK-NEXT: 0. 1 1.0 1.0 0.0 movl (%rax), %esp
# CHECK-NEXT: 1. 1 1.0 1.0 0.0 movl (%rcx), %ebp
# CHECK-NEXT: 2. 1 3.0 3.0 0.0 movl (%rdx), %esi
# CHECK-NEXT: 3. 1 3.0 3.0 0.0 movl (%rbx), %edi
# CHECK-NEXT: 1 2.0 2.0 0.0 <total>
# CHECK: [3] Code Region
# CHECK: Iterations: 100
# CHECK-NEXT: Instructions: 400
# CHECK-NEXT: Total Cycles: 406
# CHECK-NEXT: Total uOps: 400
# CHECK: Dispatch Width: 4
# CHECK-NEXT: uOps Per Cycle: 0.99
# CHECK-NEXT: IPC: 0.99
# CHECK-NEXT: Block RThroughput: 4.0
# CHECK: Instruction Info:
# CHECK-NEXT: [1]: #uOps
# CHECK-NEXT: [2]: Latency
# CHECK-NEXT: [3]: RThroughput
# CHECK-NEXT: [4]: MayLoad
# CHECK-NEXT: [5]: MayStore
# CHECK-NEXT: [6]: HasSideEffects (U)
# CHECK: [1] [2] [3] [4] [5] [6] Instructions:
# CHECK-NEXT: 1 5 1.00 * movq (%rax), %rsp
# CHECK-NEXT: 1 5 1.00 * movq (%rcx), %rbp
# CHECK-NEXT: 1 5 1.00 * movq (%rdx), %rsi
# CHECK-NEXT: 1 5 1.00 * movq (%rbx), %rdi
# CHECK: Dynamic Dispatch Stall Cycles:
# CHECK-NEXT: RAT - Register unavailable: 0
# CHECK-NEXT: RCU - Retire tokens unavailable: 0
# CHECK-NEXT: SCHEDQ - Scheduler full: 0
# CHECK-NEXT: LQ - Load queue full: 354 (87.2%)
# CHECK-NEXT: SQ - Store queue full: 0
# CHECK-NEXT: GROUP - Static restrictions on the dispatch group: 0
# CHECK-NEXT: USH - Uncategorised Structural Hazard: 0
# CHECK: Dispatch Logic - number of cycles where we saw N micro opcodes dispatched:
# CHECK-NEXT: [# dispatched], [# cycles]
# CHECK-NEXT: 0, 217 (53.4%)
# CHECK-NEXT: 2, 178 (43.8%)
# CHECK-NEXT: 4, 11 (2.7%)
# CHECK: Schedulers - number of cycles where we saw N micro opcodes issued:
# CHECK-NEXT: [# issued], [# cycles]
# CHECK-NEXT: 0, 206 (50.7%)
# CHECK-NEXT: 2, 200 (49.3%)
# CHECK: Scheduler's queue usage:
# CHECK-NEXT: [1] Resource name.
# CHECK-NEXT: [2] Average number of used buffer entries.
# CHECK-NEXT: [3] Maximum number of used buffer entries.
# CHECK-NEXT: [4] Total number of buffer entries.
# CHECK: [1] [2] [3] [4]
# CHECK-NEXT: PdEX 31 34 40
# CHECK-NEXT: PdFPU 0 0 64
# CHECK-NEXT: PdLoad 36 40 40
# CHECK-NEXT: PdStore 0 0 24
# CHECK: Resources:
# CHECK-NEXT: [0.0] - PdAGLU01
# CHECK-NEXT: [0.1] - PdAGLU01
# CHECK-NEXT: [1] - PdBranch
# CHECK-NEXT: [2] - PdCount
# CHECK-NEXT: [3] - PdDiv
# CHECK-NEXT: [4] - PdEX0
# CHECK-NEXT: [5] - PdEX1
# CHECK-NEXT: [6] - PdFPCVT
# CHECK-NEXT: [7.0] - PdFPFMA
# CHECK-NEXT: [7.1] - PdFPFMA
# CHECK-NEXT: [8.0] - PdFPMAL
# CHECK-NEXT: [8.1] - PdFPMAL
# CHECK-NEXT: [9] - PdFPMMA
# CHECK-NEXT: [10] - PdFPSTO
# CHECK-NEXT: [11] - PdFPU0
# CHECK-NEXT: [12] - PdFPU1
# CHECK-NEXT: [13] - PdFPU2
# CHECK-NEXT: [14] - PdFPU3
# CHECK-NEXT: [15] - PdFPXBR
# CHECK-NEXT: [16.0] - PdLoad
# CHECK-NEXT: [16.1] - PdLoad
# CHECK-NEXT: [17] - PdMul
# CHECK-NEXT: [18] - PdStore
# CHECK: Resource pressure per iteration:
# CHECK-NEXT: [0.0] [0.1] [1] [2] [3] [4] [5] [6] [7.0] [7.1] [8.0] [8.1] [9] [10] [11] [12] [13] [14] [15] [16.0] [16.1] [17] [18]
# CHECK-NEXT: 4.00 4.00 - - - - - - - - - - - - - - - - - 4.00 4.00 - -
# CHECK: Resource pressure by instruction:
# CHECK-NEXT: [0.0] [0.1] [1] [2] [3] [4] [5] [6] [7.0] [7.1] [8.0] [8.1] [9] [10] [11] [12] [13] [14] [15] [16.0] [16.1] [17] [18] Instructions:
# CHECK-NEXT: - 2.00 - - - - - - - - - - - - - - - - - - 2.00 - - movq (%rax), %rsp
# CHECK-NEXT: 2.00 - - - - - - - - - - - - - - - - - - 2.00 - - - movq (%rcx), %rbp
# CHECK-NEXT: - 2.00 - - - - - - - - - - - - - - - - - - 2.00 - - movq (%rdx), %rsi
# CHECK-NEXT: 2.00 - - - - - - - - - - - - - - - - - - 2.00 - - - movq (%rbx), %rdi
# CHECK: Timeline view:
# CHECK-NEXT: Index 0123456789
# CHECK: [0,0] DeeeeeER . movq (%rax), %rsp
# CHECK-NEXT: [0,1] DeeeeeER . movq (%rcx), %rbp
# CHECK-NEXT: [0,2] D==eeeeeER movq (%rdx), %rsi
# CHECK-NEXT: [0,3] D==eeeeeER movq (%rbx), %rdi
# CHECK: Average Wait times (based on the timeline view):
# CHECK-NEXT: [0]: Executions
# CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue
# CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready
# CHECK-NEXT: [3]: Average time elapsed from WB until retire stage
# CHECK: [0] [1] [2] [3]
# CHECK-NEXT: 0. 1 1.0 1.0 0.0 movq (%rax), %rsp
# CHECK-NEXT: 1. 1 1.0 1.0 0.0 movq (%rcx), %rbp
# CHECK-NEXT: 2. 1 3.0 3.0 0.0 movq (%rdx), %rsi
# CHECK-NEXT: 3. 1 3.0 3.0 0.0 movq (%rbx), %rdi
# CHECK-NEXT: 1 2.0 2.0 0.0 <total>
# CHECK: [4] Code Region
# CHECK: Iterations: 100
# CHECK-NEXT: Instructions: 400
# CHECK-NEXT: Total Cycles: 605
# CHECK-NEXT: Total uOps: 400
# CHECK: Dispatch Width: 4
# CHECK-NEXT: uOps Per Cycle: 0.66
# CHECK-NEXT: IPC: 0.66
# CHECK-NEXT: Block RThroughput: 6.0
# CHECK: Instruction Info:
# CHECK-NEXT: [1]: #uOps
# CHECK-NEXT: [2]: Latency
# CHECK-NEXT: [3]: RThroughput
# CHECK-NEXT: [4]: MayLoad
# CHECK-NEXT: [5]: MayStore
# CHECK-NEXT: [6]: HasSideEffects (U)
# CHECK: [1] [2] [3] [4] [5] [6] Instructions:
# CHECK-NEXT: 1 5 1.50 * movd (%rax), %mm0
# CHECK-NEXT: 1 5 1.50 * movd (%rcx), %mm1
# CHECK-NEXT: 1 5 1.50 * movd (%rdx), %mm2
# CHECK-NEXT: 1 5 1.50 * movd (%rbx), %mm3
# CHECK: Dynamic Dispatch Stall Cycles:
# CHECK-NEXT: RAT - Register unavailable: 0
# CHECK-NEXT: RCU - Retire tokens unavailable: 0
# CHECK-NEXT: SCHEDQ - Scheduler full: 0
# CHECK-NEXT: LQ - Load queue full: 533 (88.1%)
# CHECK-NEXT: SQ - Store queue full: 0
# CHECK-NEXT: GROUP - Static restrictions on the dispatch group: 0
# CHECK-NEXT: USH - Uncategorised Structural Hazard: 0
# CHECK: Dispatch Logic - number of cycles where we saw N micro opcodes dispatched:
# CHECK-NEXT: [# dispatched], [# cycles]
# CHECK-NEXT: 0, 416 (68.8%)
# CHECK-NEXT: 2, 178 (29.4%)
# CHECK-NEXT: 4, 11 (1.8%)
# CHECK: Schedulers - number of cycles where we saw N micro opcodes issued:
# CHECK-NEXT: [# issued], [# cycles]
# CHECK-NEXT: 0, 405 (66.9%)
# CHECK-NEXT: 2, 200 (33.1%)
# CHECK: Scheduler's queue usage:
# CHECK-NEXT: [1] Resource name.
# CHECK-NEXT: [2] Average number of used buffer entries.
# CHECK-NEXT: [3] Maximum number of used buffer entries.
# CHECK-NEXT: [4] Total number of buffer entries.
# CHECK: [1] [2] [3] [4]
# CHECK-NEXT: PdEX 33 36 40
# CHECK-NEXT: PdFPU 33 36 64
# CHECK-NEXT: PdLoad 37 40 40
# CHECK-NEXT: PdStore 0 0 24
# CHECK: Resources:
# CHECK-NEXT: [0.0] - PdAGLU01
# CHECK-NEXT: [0.1] - PdAGLU01
# CHECK-NEXT: [1] - PdBranch
# CHECK-NEXT: [2] - PdCount
# CHECK-NEXT: [3] - PdDiv
# CHECK-NEXT: [4] - PdEX0
# CHECK-NEXT: [5] - PdEX1
# CHECK-NEXT: [6] - PdFPCVT
# CHECK-NEXT: [7.0] - PdFPFMA
# CHECK-NEXT: [7.1] - PdFPFMA
# CHECK-NEXT: [8.0] - PdFPMAL
# CHECK-NEXT: [8.1] - PdFPMAL
# CHECK-NEXT: [9] - PdFPMMA
# CHECK-NEXT: [10] - PdFPSTO
# CHECK-NEXT: [11] - PdFPU0
# CHECK-NEXT: [12] - PdFPU1
# CHECK-NEXT: [13] - PdFPU2
# CHECK-NEXT: [14] - PdFPU3
# CHECK-NEXT: [15] - PdFPXBR
# CHECK-NEXT: [16.0] - PdLoad
# CHECK-NEXT: [16.1] - PdLoad
# CHECK-NEXT: [17] - PdMul
# CHECK-NEXT: [18] - PdStore
# CHECK: Resource pressure per iteration:
# CHECK-NEXT: [0.0] [0.1] [1] [2] [3] [4] [5] [6] [7.0] [7.1] [8.0] [8.1] [9] [10] [11] [12] [13] [14] [15] [16.0] [16.1] [17] [18]
# CHECK-NEXT: 6.00 6.00 - - - - - - - - 6.00 6.00 - - 2.00 2.00 - - - 6.00 6.00 - -
# CHECK: Resource pressure by instruction:
# CHECK-NEXT: [0.0] [0.1] [1] [2] [3] [4] [5] [6] [7.0] [7.1] [8.0] [8.1] [9] [10] [11] [12] [13] [14] [15] [16.0] [16.1] [17] [18] Instructions:
# CHECK-NEXT: - 3.00 - - - - - - - - - 3.00 - - - 1.00 - - - - 3.00 - - movd (%rax), %mm0
# CHECK-NEXT: 3.00 - - - - - - - - - 3.00 - - - 1.00 - - - - 3.00 - - - movd (%rcx), %mm1
# CHECK-NEXT: - 3.00 - - - - - - - - - 3.00 - - - 1.00 - - - - 3.00 - - movd (%rdx), %mm2
# CHECK-NEXT: 3.00 - - - - - - - - - 3.00 - - - 1.00 - - - - 3.00 - - - movd (%rbx), %mm3
# CHECK: Timeline view:
# CHECK-NEXT: 0
# CHECK-NEXT: Index 0123456789
# CHECK: [0,0] DeeeeeER . movd (%rax), %mm0
# CHECK-NEXT: [0,1] DeeeeeER . movd (%rcx), %mm1
# CHECK-NEXT: [0,2] D===eeeeeER movd (%rdx), %mm2
# CHECK-NEXT: [0,3] D===eeeeeER movd (%rbx), %mm3
# CHECK: Average Wait times (based on the timeline view):
# CHECK-NEXT: [0]: Executions
# CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue
# CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready
# CHECK-NEXT: [3]: Average time elapsed from WB until retire stage
# CHECK: [0] [1] [2] [3]
# CHECK-NEXT: 0. 1 1.0 1.0 0.0 movd (%rax), %mm0
# CHECK-NEXT: 1. 1 1.0 1.0 0.0 movd (%rcx), %mm1
# CHECK-NEXT: 2. 1 4.0 4.0 0.0 movd (%rdx), %mm2
# CHECK-NEXT: 3. 1 4.0 4.0 0.0 movd (%rbx), %mm3
# CHECK-NEXT: 1 2.5 2.5 0.0 <total>
# CHECK: [5] Code Region
# CHECK: Iterations: 100
# CHECK-NEXT: Instructions: 400
# CHECK-NEXT: Total Cycles: 605
# CHECK-NEXT: Total uOps: 400
# CHECK: Dispatch Width: 4
# CHECK-NEXT: uOps Per Cycle: 0.66
# CHECK-NEXT: IPC: 0.66
# CHECK-NEXT: Block RThroughput: 6.0
# CHECK: Instruction Info:
# CHECK-NEXT: [1]: #uOps
# CHECK-NEXT: [2]: Latency
# CHECK-NEXT: [3]: RThroughput
# CHECK-NEXT: [4]: MayLoad
# CHECK-NEXT: [5]: MayStore
# CHECK-NEXT: [6]: HasSideEffects (U)
# CHECK: [1] [2] [3] [4] [5] [6] Instructions:
# CHECK-NEXT: 1 5 1.50 * movaps (%rax), %xmm0
# CHECK-NEXT: 1 5 1.50 * movaps (%rcx), %xmm1
# CHECK-NEXT: 1 5 1.50 * movaps (%rdx), %xmm2
# CHECK-NEXT: 1 5 1.50 * movaps (%rbx), %xmm3
# CHECK: Dynamic Dispatch Stall Cycles:
# CHECK-NEXT: RAT - Register unavailable: 0
# CHECK-NEXT: RCU - Retire tokens unavailable: 0
# CHECK-NEXT: SCHEDQ - Scheduler full: 0
# CHECK-NEXT: LQ - Load queue full: 533 (88.1%)
# CHECK-NEXT: SQ - Store queue full: 0
# CHECK-NEXT: GROUP - Static restrictions on the dispatch group: 0
# CHECK-NEXT: USH - Uncategorised Structural Hazard: 0
# CHECK: Dispatch Logic - number of cycles where we saw N micro opcodes dispatched:
# CHECK-NEXT: [# dispatched], [# cycles]
# CHECK-NEXT: 0, 416 (68.8%)
# CHECK-NEXT: 2, 178 (29.4%)
# CHECK-NEXT: 4, 11 (1.8%)
# CHECK: Schedulers - number of cycles where we saw N micro opcodes issued:
# CHECK-NEXT: [# issued], [# cycles]
# CHECK-NEXT: 0, 405 (66.9%)
# CHECK-NEXT: 2, 200 (33.1%)
# CHECK: Scheduler's queue usage:
# CHECK-NEXT: [1] Resource name.
# CHECK-NEXT: [2] Average number of used buffer entries.
# CHECK-NEXT: [3] Maximum number of used buffer entries.
# CHECK-NEXT: [4] Total number of buffer entries.
# CHECK: [1] [2] [3] [4]
# CHECK-NEXT: PdEX 33 36 40
# CHECK-NEXT: PdFPU 33 36 64
# CHECK-NEXT: PdLoad 37 40 40
# CHECK-NEXT: PdStore 0 0 24
# CHECK: Resources:
# CHECK-NEXT: [0.0] - PdAGLU01
# CHECK-NEXT: [0.1] - PdAGLU01
# CHECK-NEXT: [1] - PdBranch
# CHECK-NEXT: [2] - PdCount
# CHECK-NEXT: [3] - PdDiv
# CHECK-NEXT: [4] - PdEX0
# CHECK-NEXT: [5] - PdEX1
# CHECK-NEXT: [6] - PdFPCVT
# CHECK-NEXT: [7.0] - PdFPFMA
# CHECK-NEXT: [7.1] - PdFPFMA
# CHECK-NEXT: [8.0] - PdFPMAL
# CHECK-NEXT: [8.1] - PdFPMAL
# CHECK-NEXT: [9] - PdFPMMA
# CHECK-NEXT: [10] - PdFPSTO
# CHECK-NEXT: [11] - PdFPU0
# CHECK-NEXT: [12] - PdFPU1
# CHECK-NEXT: [13] - PdFPU2
# CHECK-NEXT: [14] - PdFPU3
# CHECK-NEXT: [15] - PdFPXBR
# CHECK-NEXT: [16.0] - PdLoad
# CHECK-NEXT: [16.1] - PdLoad
# CHECK-NEXT: [17] - PdMul
# CHECK-NEXT: [18] - PdStore
# CHECK: Resource pressure per iteration:
# CHECK-NEXT: [0.0] [0.1] [1] [2] [3] [4] [5] [6] [7.0] [7.1] [8.0] [8.1] [9] [10] [11] [12] [13] [14] [15] [16.0] [16.1] [17] [18]
# CHECK-NEXT: 6.00 6.00 - - - - - - 6.00 6.00 - - - - 2.00 2.00 - - - 6.00 6.00 - -
# CHECK: Resource pressure by instruction:
# CHECK-NEXT: [0.0] [0.1] [1] [2] [3] [4] [5] [6] [7.0] [7.1] [8.0] [8.1] [9] [10] [11] [12] [13] [14] [15] [16.0] [16.1] [17] [18] Instructions:
# CHECK-NEXT: - 3.00 - - - - - - - 3.00 - - - - - 1.00 - - - - 3.00 - - movaps (%rax), %xmm0
# CHECK-NEXT: 3.00 - - - - - - - 3.00 - - - - - 1.00 - - - - 3.00 - - - movaps (%rcx), %xmm1
# CHECK-NEXT: - 3.00 - - - - - - - 3.00 - - - - - 1.00 - - - - 3.00 - - movaps (%rdx), %xmm2
# CHECK-NEXT: 3.00 - - - - - - - 3.00 - - - - - 1.00 - - - - 3.00 - - - movaps (%rbx), %xmm3
# CHECK: Timeline view:
# CHECK-NEXT: 0
# CHECK-NEXT: Index 0123456789
# CHECK: [0,0] DeeeeeER . movaps (%rax), %xmm0
# CHECK-NEXT: [0,1] DeeeeeER . movaps (%rcx), %xmm1
# CHECK-NEXT: [0,2] D===eeeeeER movaps (%rdx), %xmm2
# CHECK-NEXT: [0,3] D===eeeeeER movaps (%rbx), %xmm3
# CHECK: Average Wait times (based on the timeline view):
# CHECK-NEXT: [0]: Executions
# CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue
# CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready
# CHECK-NEXT: [3]: Average time elapsed from WB until retire stage
# CHECK: [0] [1] [2] [3]
# CHECK-NEXT: 0. 1 1.0 1.0 0.0 movaps (%rax), %xmm0
# CHECK-NEXT: 1. 1 1.0 1.0 0.0 movaps (%rcx), %xmm1
# CHECK-NEXT: 2. 1 4.0 4.0 0.0 movaps (%rdx), %xmm2
# CHECK-NEXT: 3. 1 4.0 4.0 0.0 movaps (%rbx), %xmm3
# CHECK-NEXT: 1 2.5 2.5 0.0 <total>
# CHECK: [6] Code Region
# CHECK: Iterations: 100
# CHECK-NEXT: Instructions: 400
# CHECK-NEXT: Total Cycles: 605
# CHECK-NEXT: Total uOps: 800
# CHECK: Dispatch Width: 4
# CHECK-NEXT: uOps Per Cycle: 1.32
# CHECK-NEXT: IPC: 0.66
# CHECK-NEXT: Block RThroughput: 6.0
# CHECK: Instruction Info:
# CHECK-NEXT: [1]: #uOps
# CHECK-NEXT: [2]: Latency
# CHECK-NEXT: [3]: RThroughput
# CHECK-NEXT: [4]: MayLoad
# CHECK-NEXT: [5]: MayStore
# CHECK-NEXT: [6]: HasSideEffects (U)
# CHECK: [1] [2] [3] [4] [5] [6] Instructions:
# CHECK-NEXT: 2 5 1.50 * vmovaps (%rax), %ymm0
# CHECK-NEXT: 2 5 1.50 * vmovaps (%rcx), %ymm1
# CHECK-NEXT: 2 5 1.50 * vmovaps (%rdx), %ymm2
# CHECK-NEXT: 2 5 1.50 * vmovaps (%rbx), %ymm3
# CHECK: Dynamic Dispatch Stall Cycles:
# CHECK-NEXT: RAT - Register unavailable: 0
# CHECK-NEXT: RCU - Retire tokens unavailable: 0
# CHECK-NEXT: SCHEDQ - Scheduler full: 0
# CHECK-NEXT: LQ - Load queue full: 345 (57.0%)
# CHECK-NEXT: SQ - Store queue full: 0
# CHECK-NEXT: GROUP - Static restrictions on the dispatch group: 0
# CHECK-NEXT: USH - Uncategorised Structural Hazard: 0
# CHECK: Dispatch Logic - number of cycles where we saw N micro opcodes dispatched:
# CHECK-NEXT: [# dispatched], [# cycles]
# CHECK-NEXT: 0, 405 (66.9%)
# CHECK-NEXT: 4, 200 (33.1%)
# CHECK: Schedulers - number of cycles where we saw N micro opcodes issued:
# CHECK-NEXT: [# issued], [# cycles]
# CHECK-NEXT: 0, 405 (66.9%)
# CHECK-NEXT: 4, 200 (33.1%)
# CHECK: Scheduler's queue usage:
# CHECK-NEXT: [1] Resource name.
# CHECK-NEXT: [2] Average number of used buffer entries.
# CHECK-NEXT: [3] Maximum number of used buffer entries.
# CHECK-NEXT: [4] Total number of buffer entries.
# CHECK: [1] [2] [3] [4]
# CHECK-NEXT: PdEX 33 36 40
# CHECK-NEXT: PdFPU 33 36 64
# CHECK-NEXT: PdLoad 36 40 40
# CHECK-NEXT: PdStore 0 0 24
# CHECK: Resources:
# CHECK-NEXT: [0.0] - PdAGLU01
# CHECK-NEXT: [0.1] - PdAGLU01
# CHECK-NEXT: [1] - PdBranch
# CHECK-NEXT: [2] - PdCount
# CHECK-NEXT: [3] - PdDiv
# CHECK-NEXT: [4] - PdEX0
# CHECK-NEXT: [5] - PdEX1
# CHECK-NEXT: [6] - PdFPCVT
# CHECK-NEXT: [7.0] - PdFPFMA
# CHECK-NEXT: [7.1] - PdFPFMA
# CHECK-NEXT: [8.0] - PdFPMAL
# CHECK-NEXT: [8.1] - PdFPMAL
# CHECK-NEXT: [9] - PdFPMMA
# CHECK-NEXT: [10] - PdFPSTO
# CHECK-NEXT: [11] - PdFPU0
# CHECK-NEXT: [12] - PdFPU1
# CHECK-NEXT: [13] - PdFPU2
# CHECK-NEXT: [14] - PdFPU3
# CHECK-NEXT: [15] - PdFPXBR
# CHECK-NEXT: [16.0] - PdLoad
# CHECK-NEXT: [16.1] - PdLoad
# CHECK-NEXT: [17] - PdMul
# CHECK-NEXT: [18] - PdStore
# CHECK: Resource pressure per iteration:
# CHECK-NEXT: [0.0] [0.1] [1] [2] [3] [4] [5] [6] [7.0] [7.1] [8.0] [8.1] [9] [10] [11] [12] [13] [14] [15] [16.0] [16.1] [17] [18]
# CHECK-NEXT: 6.00 6.00 - - - - - - 6.00 6.00 - - - - 2.00 2.00 - - - 6.00 6.00 - -
# CHECK: Resource pressure by instruction:
# CHECK-NEXT: [0.0] [0.1] [1] [2] [3] [4] [5] [6] [7.0] [7.1] [8.0] [8.1] [9] [10] [11] [12] [13] [14] [15] [16.0] [16.1] [17] [18] Instructions:
# CHECK-NEXT: - 3.00 - - - - - - - 3.00 - - - - - 1.00 - - - - 3.00 - - vmovaps (%rax), %ymm0
# CHECK-NEXT: 3.00 - - - - - - - 3.00 - - - - - 1.00 - - - - 3.00 - - - vmovaps (%rcx), %ymm1
# CHECK-NEXT: - 3.00 - - - - - - - 3.00 - - - - - 1.00 - - - - 3.00 - - vmovaps (%rdx), %ymm2
# CHECK-NEXT: 3.00 - - - - - - - 3.00 - - - - - 1.00 - - - - 3.00 - - - vmovaps (%rbx), %ymm3
# CHECK: Timeline view:
# CHECK-NEXT: 0
# CHECK-NEXT: Index 0123456789
# CHECK: [0,0] DeeeeeER . vmovaps (%rax), %ymm0
# CHECK-NEXT: [0,1] DeeeeeER . vmovaps (%rcx), %ymm1
# CHECK-NEXT: [0,2] .D==eeeeeER vmovaps (%rdx), %ymm2
# CHECK-NEXT: [0,3] .D==eeeeeER vmovaps (%rbx), %ymm3
# CHECK: Average Wait times (based on the timeline view):
# CHECK-NEXT: [0]: Executions
# CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue
# CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready
# CHECK-NEXT: [3]: Average time elapsed from WB until retire stage
# CHECK: [0] [1] [2] [3]
# CHECK-NEXT: 0. 1 1.0 1.0 0.0 vmovaps (%rax), %ymm0
# CHECK-NEXT: 1. 1 1.0 1.0 0.0 vmovaps (%rcx), %ymm1
# CHECK-NEXT: 2. 1 3.0 3.0 0.0 vmovaps (%rdx), %ymm2
# CHECK-NEXT: 3. 1 3.0 3.0 0.0 vmovaps (%rbx), %ymm3
# CHECK-NEXT: 1 2.0 2.0 0.0 <total>