nuudlman/llvm: llvm/test/tools/obj2yaml/ELF/program-headers.yaml

## Show that obj2yaml is able to dump program headers.

## Part I. Base check. All simple cases that look OK as a part of a single large test live here.

# RUN: yaml2obj %s -o %t1

## Show the layout of the object before we dump it using obj2yaml.
## The check is here to make it clear what the layout should look like.
# RUN: llvm-readelf --segments %t1 | FileCheck %s --check-prefix=SEGMENT-MAPPING

# SEGMENT-MAPPING:      Program Headers:
# SEGMENT-MAPPING-NEXT:   Type      Offset   VirtAddr           PhysAddr           FileSiz  MemSiz   Flg Align
# SEGMENT-MAPPING-NEXT:   LOAD      0x000000 0x0000000000000000 0x0000000000000000 0x000281 0x000281 R   0x1000
# SEGMENT-MAPPING-NEXT:   LOAD      0x000281 0x0000000000001000 0x0000000000001000 0x000010 0x000010 R E 0x1000
# SEGMENT-MAPPING-NEXT:   LOAD      0x000291 0x0000000000002000 0x0000000000002000 0x000009 0x000009 R   0x1000
# SEGMENT-MAPPING-NEXT:   LOAD      0x00029a 0x0000000000003ef0 0x0000000000003ef0 0x000011 0x000011 RW  0x1000
# SEGMENT-MAPPING-NEXT:   DYNAMIC   0x00029a 0x0000000000003ef0 0x0000000000003ef0 0x000010 0x000010 RW  0x8
# SEGMENT-MAPPING-NEXT:   GNU_RELRO 0x00029a 0x0000000000003ef0 0x0000000000003ef0 0x000010 0x000010 R   0x1
# SEGMENT-MAPPING-NEXT:   LOAD      0x000000 0x0000000000004000 0x0000000000004000 0x000000 0x000000 R   0x1
# SEGMENT-MAPPING-NEXT:   LOAD      0x000248 0x00000000000001a0 0x00000000000001a0 0x000020 0x000020 R   0x1
# SEGMENT-MAPPING-NEXT:   LOAD      0x000248 0x00000000000001a0 0x00000000000001a0 0x000020 0x000020 R   0x1
# SEGMENT-MAPPING:      Section to Segment mapping:
# SEGMENT-MAPPING-NEXT:  Segment Sections...
# SEGMENT-MAPPING-NEXT:   00     .hash .gnu.hash .dynsym .dynstr {{$}}
# SEGMENT-MAPPING-NEXT:   01     .foo .zed {{$}}
# SEGMENT-MAPPING-NEXT:   02     .foo .baz {{$}}
# SEGMENT-MAPPING-NEXT:   03     .dynamic .dynamic.tail {{$}}
# SEGMENT-MAPPING-NEXT:   04     .dynamic {{$}}
# SEGMENT-MAPPING-NEXT:   05     .dynamic {{$}}
# SEGMENT-MAPPING-NEXT:   06{{ *$}}
# SEGMENT-MAPPING-NEXT:   07     .gnu.hash {{$}}
# SEGMENT-MAPPING-NEXT:   08     .gnu.hash {{$}}
# SEGMENT-MAPPING-NEXT:   None   .symtab .strtab .shstrtab {{$}}

## Check that obj2yaml produced a correct program headers description.

# RUN: obj2yaml %t1 | FileCheck %s --check-prefix=YAML

# YAML:      ProgramHeaders:
# YAML-NEXT:  - Type:     PT_LOAD
# YAML-NEXT:    Flags:    [ PF_R ]
# YAML-NEXT:    FirstSec: .hash
# YAML-NEXT:    LastSec:  .dynstr
# YAML-NEXT:    Align:    0x1000
# YAML-NEXT:  - Type:     PT_LOAD
# YAML-NEXT:    Flags:    [ PF_X, PF_R ]
# YAML-NEXT:    FirstSec: .foo
# YAML-NEXT:    LastSec:  .zed
# YAML-NEXT:    VAddr:    0x1000
# YAML-NEXT:    Align:    0x1000
# YAML-NEXT:  - Type:     PT_LOAD
# YAML-NEXT:    Flags:    [ PF_R ]
# YAML-NEXT:    FirstSec: '.foo (1)'
# YAML-NEXT:    LastSec:  .baz
# YAML-NEXT:    VAddr:    0x2000
# YAML-NEXT:    Align:    0x1000
# YAML-NEXT:  - Type:     PT_LOAD
# YAML-NEXT:    Flags:    [ PF_W, PF_R ]
# YAML-NEXT:    FirstSec: .dynamic
# YAML-NEXT:    LastSec:  .dynamic.tail
# YAML-NEXT:    VAddr:    0x3EF0
# YAML-NEXT:    Align:    0x1000
# YAML-NEXT:  - Type:     PT_DYNAMIC
# YAML-NEXT:    Flags:    [ PF_W, PF_R ]
# YAML-NEXT:    FirstSec: .dynamic
# YAML-NEXT:    LastSec:  .dynamic
# YAML-NEXT:    VAddr:    0x3EF0
# YAML-NEXT:    Align:    0x8
# YAML-NEXT:  - Type:     PT_GNU_RELRO
# YAML-NEXT:    Flags:    [ PF_R ]
# YAML-NEXT:    FirstSec: .dynamic
# YAML-NEXT:    LastSec:  .dynamic
# YAML-NEXT:    VAddr:    0x3EF0
# YAML-NEXT:  - Type:  PT_LOAD
# YAML-NEXT:    Flags: [ PF_R ]
# YAML-NEXT:    VAddr: 0x4000
# YAML-NEXT:  - Type:     PT_LOAD
# YAML-NEXT:    Flags:    [ PF_R ]
# YAML-NEXT:    FirstSec: .gnu.hash
# YAML-NEXT:    LastSec:  .gnu.hash
# YAML-NEXT:    VAddr:    0x1A0
# YAML-NEXT:  - Type:     PT_LOAD
# YAML-NEXT:    Flags:    [ PF_R ]
# YAML-NEXT:    FirstSec: .gnu.hash
# YAML-NEXT:    LastSec:  .gnu.hash
# YAML-NEXT:    VAddr:    0x1A0
# YAML-NEXT: Sections:

--- !ELF
FileHeader:
  Class: ELFCLASS64
  Data:  ELFDATA2LSB
  Type:  ET_DYN
ProgramHeaders:
## Check we can create a PT_LOAD with arbitrary (we used .hash, .gnu.hash)
## and implicit sections (we use .dynsym, .dynstr). It also checks that the
## SHT_NULL section at index 0 is not included in the segment.
  - Type:     PT_LOAD
    Flags:    [ PF_R ]
    FirstSec: .hash
    LastSec:  .dynstr
    Align:  0x1000
    Offset: 0x0
## Check we can create a PT_LOAD with a different set of properties and sections.
  - Type:     PT_LOAD
    Flags:    [ PF_X, PF_R ]
    FirstSec: .foo
    LastSec:  .zed
    VAddr:    0x1000
    Align:    0x1000
## Create a PT_LOAD to demonstate we are able to refer to output sections with the same name.
  - Type:     PT_LOAD
    Flags:    [ PF_R ]
    FirstSec: '.foo (1)'
    LastSec:  .baz
    VAddr:    0x2000
    Align:    0x1000
## Show we can create a writeable PT_LOAD segment and put an arbitrary section into it.
## Here we test both regular (SHT_PROGBITS) and a special section (SHT_DYNAMIC).
  - Type:     PT_LOAD
    Flags:    [ PF_W, PF_R ]
    FirstSec: .dynamic
    LastSec:  .dynamic.tail
    VAddr:    0x3EF0
    Align:    0x1000
## Show we can create a nested dynamic segment and put a section into it.
  - Type:     PT_DYNAMIC
    Flags:    [ PF_W, PF_R ]
    FirstSec: .dynamic
    LastSec:  .dynamic
    VAddr:    0x3EF0
    Align:    0x8
## Show we can create a relro segment and put a section into it.
## We used .dynamic here and in tests above to demonstrate that
## we can place a section in any number of segments.
## Also, we explicitly set the "Align" property to 1 to demonstate
## that we do not dump it, because it is the default alignment
## value set by yaml2obj.
  - Type:     PT_GNU_RELRO
    Flags:    [ PF_R ]
    FirstSec: .dynamic
    LastSec:  .dynamic
    VAddr:    0x3EF0
    Align:    0x1
## Show we can dump a standalone empty segment.
  - Type:  PT_LOAD
    Flags: [ PF_R ]
    VAddr: 0x4000
    Align: 0x1
## ELF specification says that loadable segment entries in the
## program header are sorted by virtual address.
## Show we can dump an out of order segment.
  - Type:     PT_LOAD
    Flags:    [ PF_R ]
    FirstSec: .gnu.hash
    LastSec:  .gnu.hash
    VAddr:    0x1A0
    Align:    0x1
## Test we are able to dump duplicated segments.
## We use a segment that is the same as the previous one for this.
  - Type:     PT_LOAD
    Flags:    [ PF_R ]
    FirstSec: .gnu.hash
    LastSec:  .gnu.hash
    VAddr:    0x1A0
    Align:    0x1
Sections:
  - Name:    .hash
    Type:    SHT_PROGBITS
    Flags:   [ SHF_ALLOC ]
    Address: 0x190
    Size:    0x10
  - Name:    .gnu.hash
    Type:    SHT_PROGBITS
    Flags:   [ SHF_ALLOC ]
    Address: 0x1A0
    Size:    0x20
  - Name:    .dynsym
    Type:    SHT_DYNSYM
    Flags:   [ SHF_ALLOC ]
    Address: 0x1C0
    Link:    .dynstr
    EntSize: 0x18
  - Name:    .dynstr
    Type:    SHT_STRTAB
    Flags:   [ SHF_ALLOC ]
    Address: 0x1D8
  - Name:    .foo
    Type:    SHT_PROGBITS
    Flags:   [ SHF_ALLOC, SHF_EXECINSTR ]
    Address: 0x1000
    Size:    0x8
  - Name:    .zed
    Type:    SHT_PROGBITS
    Flags:   [ SHF_ALLOC, SHF_EXECINSTR ]
    Address: 0x1008
    Size:    0x8
  - Name:    '.foo (1)'
    Type:    SHT_PROGBITS
    Flags:   [ SHF_ALLOC ]
    Address: 0x2000
    Size:    0x8
  - Name:    .baz
    Type:    SHT_PROGBITS
    Flags:   [ SHF_ALLOC ]
    Address: 0x2008
    Size:    0x1
  - Name:    .dynamic
    Type:    SHT_DYNAMIC
    Flags:   [ SHF_WRITE, SHF_ALLOC ]
    Address: 0x0000000000003EF0
    Link:    .dynstr
    Entries:
      - Tag:   DT_NULL
        Value: 0x0
  - Name:    .dynamic.tail
    Type:    SHT_PROGBITS
    Flags:   [ SHF_WRITE, SHF_ALLOC ]
    Content: "FE"
Symbols: []
DynamicSymbols: []

## Part II. More specific tests.

## Check we are able to dump segments that are empty or
## contain empty sections.
# RUN: yaml2obj --docnum=2 %s -o %t2
# RUN: obj2yaml %t2 | FileCheck %s --check-prefix=EMPTY

# EMPTY:      - Type:     PT_LOAD
# EMPTY-NEXT:   Flags:    [ PF_W, PF_R ]
# EMPTY-NEXT:   FirstSec: .empty.tls.start
# EMPTY-NEXT:   LastSec:  .empty.tls.end
# EMPTY-NEXT:   VAddr:    0x1000
# EMPTY-NEXT:   Align:    0x1000
# EMPTY-NEXT: - Type:     PT_TLS
# EMPTY-NEXT:   Flags:    [ PF_W, PF_R ]
# EMPTY-NEXT:   FirstSec: .empty.tls.start
# EMPTY-NEXT:   LastSec:  .empty.tls.start
# EMPTY-NEXT:   VAddr:    0x1000
# EMPTY-NEXT: - Type:     PT_TLS
# EMPTY-NEXT:   Flags:    [ PF_W, PF_R ]
# EMPTY-NEXT:   FirstSec: .empty.tls.middle
# EMPTY-NEXT:   LastSec:  .empty.tls.middle
# EMPTY-NEXT:   VAddr:    0x1100
# EMPTY-NEXT: - Type:     PT_TLS
# EMPTY-NEXT:   Flags:    [ PF_W, PF_R ]
# EMPTY-NEXT:   FirstSec: .empty.tls.end
# EMPTY-NEXT:   LastSec:  .empty.tls.end
# EMPTY-NEXT:   VAddr:    0x1200
# EMPTY-NEXT: Sections:

--- !ELF
FileHeader:
  Class: ELFCLASS64
  Data:  ELFDATA2LSB
  Type:  ET_DYN
ProgramHeaders:
  - Type:     PT_LOAD
    Flags:    [ PF_W, PF_R ]
    FirstSec: .empty.tls.start
    LastSec:  .empty.tls.end
    VAddr:    0x1000
    Align:    0x1000
  - Type:     PT_TLS
    Flags:    [ PF_W, PF_R ]
    FirstSec: .empty.tls.start
    LastSec:  .empty.tls.start
    VAddr:    0x1000
    Align:    0x1
  - Type:     PT_TLS
    Flags:    [ PF_W, PF_R ]
    FirstSec: .empty.tls.middle
    LastSec:  .empty.tls.middle
    VAddr:    0x1100
    Align:    0x1
  - Type:     PT_TLS
    Flags:    [ PF_W, PF_R ]
    FirstSec: .empty.tls.end
    LastSec:  .empty.tls.end
    VAddr:    0x1200
    Align:    0x1
Sections:
  - Name:    .empty.tls.start
    Type:    SHT_PROGBITS
    Flags:   [ SHF_ALLOC, SHF_TLS ]
    Size:    0x0
    Address: 0x1000
  - Name:  .section.1
    Type:  SHT_PROGBITS
    Flags: [ SHF_ALLOC ]
    Size:  0x100
  - Name:  .empty.tls.middle
    Type:  SHT_PROGBITS
    Flags: [ SHF_ALLOC, SHF_TLS ]
    Size:  0x0
  - Name:  .section.2
    Type:  SHT_PROGBITS
    Flags: [ SHF_ALLOC ]
    Size:  0x100
  - Name:  .empty.tls.end
    Type:  SHT_PROGBITS
    Flags: [ SHF_ALLOC, SHF_TLS ]
    Size:  0x0

## Document we are able to dump misaligned segments.
## I.e. segments where (p_offset % p_align) != (p_vaddr % p_align).
# RUN: yaml2obj --docnum=3 %s -o %t3
# RUN: llvm-readelf --segments --sections %t3 | FileCheck %s --check-prefix=MISALIGNED-READELF
# RUN: obj2yaml %t3 | FileCheck %s --check-prefix=MISALIGNED-YAML

## As a misaligned p_offset value we use (`.foo` section offset - 1).
# MISALIGNED-READELF:      [Nr] Name Type     Address          Off
# MISALIGNED-READELF:      [ 1] .foo PROGBITS 0000000000001000 000078
# MISALIGNED-READELF:      Type Offset   VirtAddr           PhysAddr           FileSiz  MemSiz   Flg Align
# MISALIGNED-READELF-NEXT: LOAD 0x000077 0x0000000000001000 0x0000000000001000 0x000078 0x000078 R   0x1000

# MISALIGNED-YAML:      ProgramHeaders:
# MISALIGNED-YAML-NEXT:  - Type:     PT_LOAD
# MISALIGNED-YAML-NEXT:    Flags:    [ PF_R ]
# MISALIGNED-YAML-NEXT:    FirstSec: .foo
# MISALIGNED-YAML-NEXT:    LastSec:  .foo
# MISALIGNED-YAML-NEXT:    VAddr:    0x1000
# MISALIGNED-YAML-NEXT:    Align:    0x1000
# MISALIGNED-YAML-NEXT: Sections:

--- !ELF
FileHeader:
  Class: ELFCLASS64
  Data:  ELFDATA2LSB
  Type:  ET_DYN
ProgramHeaders:
  - Type:     PT_LOAD
    Flags:    [ PF_R ]
    FirstSec: .foo
    LastSec:  .foo
    VAddr:    0x1000
    Align:    0x1000
    Offset:   0x000077
Sections:
  - Name:    .foo
    Type:    SHT_PROGBITS
    Flags:   [ SHF_ALLOC ]
    Size:    0x77
    Address: 0x1000

## Test we include non-allocatable sections in segments.
## We also document that SHT_NULL sections are not considered to be inside a segment.
# RUN: yaml2obj --docnum=4 %s -o %t4
# RUN: obj2yaml %t4 | FileCheck %s --check-prefix=NON-ALLOC

# NON-ALLOC:      ProgramHeaders:
# NON-ALLOC-NEXT: - Type:     PT_LOAD
# NON-ALLOC-NEXT:   Flags:    [ PF_R ]
# NON-ALLOC-NEXT:   FirstSec: .alloc.1
# NON-ALLOC-NEXT:   LastSec:  .non-alloc.1
# NON-ALLOC-NEXT: - Type:     PT_LOAD
# NON-ALLOC-NEXT:   Flags:    [ PF_R ]
# NON-ALLOC-NEXT:   FirstSec: .alloc.1
# NON-ALLOC-NEXT:   LastSec:  .non-alloc.1
# NON-ALLOC-NEXT: - Type:     PT_LOAD
# NON-ALLOC-NEXT:   Flags:    [ PF_R ]
# NON-ALLOC-NEXT:   FirstSec: .alloc.2
# NON-ALLOC-NEXT:   LastSec:  .alloc.2
# NON-ALLOC-NEXT: - Type:     PT_LOAD
# NON-ALLOC-NEXT:   Flags:    [ PF_R ]
# NON-ALLOC-NEXT:   FirstSec: .alloc.1
# NON-ALLOC-NEXT:   LastSec:  .alloc.2
# NON-ALLOC-NEXT: Sections:

--- !ELF
FileHeader:
  Class: ELFCLASS64
  Data:  ELFDATA2LSB
  Type:  ET_DYN
ProgramHeaders:
  - Type:     PT_LOAD
    Flags:    [ PF_R ]
    FirstSec: .alloc.1
    LastSec:  .non-alloc.1
  - Type:     PT_LOAD
    Flags:    [ PF_R ]
    FirstSec: .alloc.1
    LastSec:  .non-alloc.2
  - Type:     PT_LOAD
    Flags:    [ PF_R ]
    FirstSec: .non-alloc.2
    LastSec:  .alloc.2
  - Type:     PT_LOAD
    Flags:    [ PF_R ]
    FirstSec: .alloc.1
    LastSec:  .alloc.2
Sections:
  - Name:    .alloc.1
    Type:    SHT_PROGBITS
    Flags:   [ SHF_ALLOC ]
    Size:    0x100
    Address: 0x1000
  - Name:    .non-alloc.1
    Type:    SHT_PROGBITS
    Flags:   [ ]
    Size:    0x10
  - Name:    .non-alloc.2
    Type:    SHT_NULL
    Flags:   [ ]
    Size:    0x10
  - Name:    .alloc.2
    Type:    SHT_PROGBITS
    Flags:   [ SHF_ALLOC ]
    Size:    0x1

## Check how we dump segments which contain SHT_NOBITS sections.
# RUN: yaml2obj --docnum=5 %s -o %t5
# RUN: obj2yaml %t5 | FileCheck %s --check-prefix=NOBITS

# NOBITS:      ProgramHeaders:
# NOBITS-NEXT:   - Type:     PT_LOAD
# NOBITS-NEXT:     Flags:    [ PF_W, PF_R ]
# NOBITS-NEXT:     FirstSec: .bss
# NOBITS-NEXT:     LastSec:  .bss
# NOBITS-NEXT:   - Type:     PT_LOAD
# NOBITS-NEXT:     Flags:    [ PF_W, PF_R ]
# NOBITS-NEXT:     FirstSec: .data.1
# NOBITS-NEXT:     LastSec:  .bss
# NOBITS-NEXT:   - Type:     PT_LOAD
# NOBITS-NEXT:     Flags:    [ PF_W, PF_R ]
# NOBITS-NEXT:     FirstSec: .data.1
# NOBITS-NEXT:     LastSec:  .data.2
# NOBITS-NEXT:   - Type:     PT_LOAD
# NOBITS-NEXT:     Flags:    [ PF_W, PF_R ]
# NOBITS-NEXT:     FirstSec: .bss
# NOBITS-NEXT:     LastSec:  .data.2
# NOBITS-NEXT:   - Type:     PT_LOAD
# NOBITS-NEXT:     Flags:    [ PF_W, PF_R ]
# NOBITS-NEXT:     FirstSec: .foo.bss
# NOBITS-NEXT:     LastSec:  .bar.bss
# NOBITS-NEXT:     VAddr:    0x200000000
# NOBITS-NEXT: Sections:

--- !ELF
FileHeader:
  Class: ELFCLASS64
  Data:  ELFDATA2LSB
  Type:  ET_EXEC
ProgramHeaders:
## Case 1: the segment contains a single SHT_NOBITS section.
  - Type:     PT_LOAD
    Flags:    [ PF_W, PF_R ]
    FirstSec: .bss
    LastSec:  .bss
## Case 2: the SHT_NOBITS section is the last section in the segment.
  - Type:     PT_LOAD
    Flags:    [ PF_W, PF_R ]
    FirstSec: .data.1
    LastSec:  .bss
## Case 3: the SHT_NOBITS section is in the middle of the segment.
  - Type:     PT_LOAD
    Flags:    [ PF_W, PF_R ]
    FirstSec: .data.1
    LastSec:  .data.2
## Case 4: the SHT_NOBITS section is the first section in the segment.
  - Type:     PT_LOAD
    Flags:    [ PF_W, PF_R ]
    FirstSec: .bss
    LastSec:  .data.2
## Case 5: another two SHT_NOBITS sections in a different segment.
  - Type:     PT_LOAD
    Flags:    [ PF_W, PF_R ]
    FirstSec: .foo.bss
    LastSec:  .bar.bss
    VAddr:    0x200000000
Sections:
  - Name:    .data.1
    Type:    SHT_PROGBITS
    Flags:   [ SHF_WRITE, SHF_ALLOC ]
## Use an arbitrary address and size.
    Address: 0x1000
    Size:    0x1
  - Name:   .bss
    Type:   SHT_NOBITS
    Flags:  [ SHF_WRITE, SHF_ALLOC ]
## Use a size that is larger than the file size.
    ShSize: 0x00000000FFFFFFFF
  - Name:  .data.2
    Type:  SHT_PROGBITS
    Flags: [ SHF_WRITE, SHF_ALLOC ]
## Use an arbitrary size.
    Size:  0x1
  - Name:    .foo.bss
    Type:    SHT_NOBITS
    Flags:   [ SHF_WRITE, SHF_ALLOC ]
## Set an arbitrary address and size so that this section can be used
## to start a different non-overlapping segment.
## I.e. its address is larger than addresses of previous sections.
    Size:    0x10
    Address: 0x200000000
  - Name:    .bar.bss
    Type:    SHT_NOBITS
    Flags:   [ SHF_WRITE, SHF_ALLOC ]
## Use an arbitrary size that is different to the size of
## the previous section.
    Size:    0x20

## Check that we require sections in a program header
## declaration to be sorted by their offsets.
# RUN: not yaml2obj --docnum=6 %s -o %t6 2>&1 | \
# RUN:   FileCheck %s --check-prefix=UNSORTED --implicit-check-not="error:"

# UNSORTED:      error: program header with index 0: the section index of .bar is greater than the index of .foo
# UNSORTED-NEXT: error: sections in the program header with index 3 are not sorted by their file offset

--- !ELF
FileHeader:
  Class: ELFCLASS64
  Data:  ELFDATA2LSB
  Type:  ET_DYN
ProgramHeaders:
## Case 1: the .bar section is placed after the .foo section in the file.
##         Check we report an error about the violation of the order.
  - Type:     PT_LOAD
    Flags:    [ PF_R ]
    FirstSec: .bar
    LastSec:  .foo
    VAddr:    0x1000
## There is nothing wrong with this segment. We have it to show that
## we report correct program header indices in error messages.
  - Type:     PT_LOAD
    Flags:    [ PF_R ]
    FirstSec: .foo
    LastSec:  .bar
    VAddr:    0x1000
## Case 2: the .bar section is placed before the .zed section in the file,
##         but the sh_offset of .zed is less than the sh_offset of
##         the .bar section because of the "ShOffset" property.
##         Document we report an error for such a case.
  - Type:     PT_LOAD
    Flags:    [ PF_R ]
    FirstSec: .bar
    LastSec:  .zed
    VAddr:    0x1001
Sections:
  - Name:    .foo
    Type:    SHT_PROGBITS
    Flags:   [ SHF_ALLOC ]
    Size:    0x1
    Address: 0x1000
  - Name:    .bar
    Type:    SHT_PROGBITS
    Flags:   [ SHF_ALLOC ]
    Size:    0x1
  - Name:     .zed
    Type:     SHT_PROGBITS
    Flags:    [ SHF_ALLOC ]
    Size:     0x1
    ShOffset: 0x0

## Check how we dump segments which contain empty sections.
# RUN: yaml2obj --docnum=7 %s -o %t7

## Show the layout of the object before we dump it using obj2yaml.
## Notes: 1) '.empty.foo', '.empty.bar1' and '.bar' have the same file offset, but '.empty.foo'
##           has a VA that is outside of the segment, hence we should not include it in it.
##        2) '.bar1' ends at 0x79, which is the starting file offset of both '.empty.bar2'
##           and '.empty.zed'. We should only include '.empty.bar2', because the VA of the
##           '.empty.zed' section is outside the segment's virtual space.
# RUN: llvm-readelf -S %t7 | FileCheck %s --check-prefix=ZERO-SIZE-MAPPING

# ZERO-SIZE-MAPPING:      Section Headers:
# ZERO-SIZE-MAPPING-NEXT:   [Nr] Name        Type     Address          Off    Size
# ZERO-SIZE-MAPPING:        [ 1] .empty.foo  PROGBITS 0000000000001000 000078 000000
# ZERO-SIZE-MAPPING-NEXT:   [ 2] .empty.bar1 PROGBITS 0000000000002000 000078 000000
# ZERO-SIZE-MAPPING-NEXT:   [ 3] .bar        PROGBITS 0000000000002000 000078 000001
# ZERO-SIZE-MAPPING-NEXT:   [ 4] .empty.bar2 PROGBITS 0000000000002001 000079 000000
# ZERO-SIZE-MAPPING-NEXT:   [ 5] .empty.zed  PROGBITS 0000000000003000 000079 000000

# RUN: obj2yaml %t7 | FileCheck %s --check-prefix=ZERO-SIZE

# ZERO-SIZE:      ProgramHeaders:
# ZERO-SIZE-NEXT:   - Type:     PT_LOAD
# ZERO-SIZE-NEXT:     Flags:    [ PF_W, PF_R ]
# ZERO-SIZE-NEXT:     FirstSec: .empty.bar1
# ZERO-SIZE-NEXT:     LastSec:  .empty.bar2
# ZERO-SIZE-NEXT:     VAddr:    0x2000
# ZERO-SIZE-NEXT: Sections:

--- !ELF
FileHeader:
  Class: ELFCLASS64
  Data:  ELFDATA2LSB
  Type:  ET_EXEC
ProgramHeaders:
  - Type:     PT_LOAD
    Flags:    [ PF_W, PF_R ]
    FirstSec: .bar
    LastSec:  .bar
    VAddr:    0x2000
Sections:
  - Name:    .empty.foo
    Type:    SHT_PROGBITS
    Flags:   [ SHF_ALLOC, SHF_EXECINSTR ]
    Address: 0x1000
  - Name:    .empty.bar1
    Type:    SHT_PROGBITS
    Flags:   [ SHF_ALLOC, SHF_EXECINSTR ]
    Address: 0x2000
  - Name:    .bar
    Type:    SHT_PROGBITS
    Flags:   [ SHF_WRITE, SHF_ALLOC ]
    Address: 0x2000
    Size:    0x1
  - Name:    .empty.bar2
    Type:    SHT_PROGBITS
    Flags:   [ SHF_ALLOC, SHF_EXECINSTR ]
    Address: 0x2001
  - Name:    .empty.zed
    Type:    SHT_PROGBITS
    Flags:   [ SHF_ALLOC, SHF_EXECINSTR ]
    Address: 0x3000

## Check how we dump a segment when we have sections that are outside of the virtual
## address space of a segment, but inside its file space. We do not include such sections
## in a segment when they are at the edges of a segment, because this is a normal case and
## it may mean they belong to a different segment.
# RUN: yaml2obj --docnum=8 %s -o %t8
# RUN: obj2yaml %t8 | FileCheck %s --check-prefix=BROKEN-VA

# BROKEN-VA:      ProgramHeaders:
# BROKEN-VA-NEXT:  - Type:     PT_LOAD
# BROKEN-VA-NEXT:    Flags:    [ PF_W, PF_R ]
# BROKEN-VA-NEXT:    FirstSec: .empty_middle
# BROKEN-VA-NEXT:    LastSec:  .empty_middle
# BROKEN-VA-NEXT:    VAddr:    0x1000

--- !ELF
FileHeader:
  Class: ELFCLASS64
  Data:  ELFDATA2LSB
  Type:  ET_EXEC
ProgramHeaders:
  - Type:     PT_LOAD
    Flags:    [ PF_W, PF_R ]
    VAddr:    0x1000
    FirstSec: .empty_begin
    LastSec:  .empty_end
Sections:
  - Name:    .empty_begin
    Type:    SHT_PROGBITS
    Flags:   [ SHF_ALLOC, SHF_EXECINSTR ]
    Address: 0xFEFEFEFE
  - Type:    Fill
    Pattern: "00"
    Size:    1
    Name:    begin
  - Name:    .empty_middle
    Type:    SHT_PROGBITS
    Flags:   [ SHF_ALLOC, SHF_EXECINSTR ]
    Address: 0xFEFEFEFE
  - Type:    Fill
    Pattern: "00"
    Size:    1
  - Name:    .empty_end
    Type:    SHT_PROGBITS
    Flags:   [ SHF_ALLOC, SHF_EXECINSTR ]
    Address: 0xFEFEFEFE