; Test 64-bit floating-point signaling comparison. The tests assume a z10
; implementation of select, using conditional branches rather than LOCGR.
;
; RUN: llc < %s -mtriple=s390x-linux-gnu -mcpu=z10 \
; RUN: | FileCheck -check-prefix=CHECK -check-prefix=CHECK-SCALAR %s
; RUN: llc < %s -mtriple=s390x-linux-gnu -mcpu=z13 -verify-machineinstrs\
; RUN: | FileCheck -check-prefix=CHECK -check-prefix=CHECK-VECTOR %s
declare double @foo()
; Check comparison with registers.
define i64 @f1(i64 %a, i64 %b, double %f1, double %f2) #0 {
; CHECK-LABEL: f1:
; CHECK: kdbr %f0, %f2
; CHECK-SCALAR-NEXT: ber %r14
; CHECK-SCALAR: lgr %r2, %r3
; CHECK-VECTOR-NEXT: locgrne %r2, %r3
; CHECK: br %r14
%cond = call i1 @llvm.experimental.constrained.fcmps.f64(
double %f1, double %f2,
metadata !"oeq",
metadata !"fpexcept.strict") #0
%res = select i1 %cond, i64 %a, i64 %b
ret i64 %res
}
; Check the low end of the KDB range.
define i64 @f2(i64 %a, i64 %b, double %f1, double *%ptr) #0 {
; CHECK-LABEL: f2:
; CHECK: kdb %f0, 0(%r4)
; CHECK-SCALAR-NEXT: ber %r14
; CHECK-SCALAR: lgr %r2, %r3
; CHECK-VECTOR-NEXT: locgrne %r2, %r3
; CHECK: br %r14
%f2 = load double, double *%ptr
%cond = call i1 @llvm.experimental.constrained.fcmps.f64(
double %f1, double %f2,
metadata !"oeq",
metadata !"fpexcept.strict") #0
%res = select i1 %cond, i64 %a, i64 %b
ret i64 %res
}
; Check the high end of the aligned KDB range.
define i64 @f3(i64 %a, i64 %b, double %f1, double *%base) #0 {
; CHECK-LABEL: f3:
; CHECK: kdb %f0, 4088(%r4)
; CHECK-SCALAR-NEXT: ber %r14
; CHECK-SCALAR: lgr %r2, %r3
; CHECK-VECTOR-NEXT: locgrne %r2, %r3
; CHECK: br %r14
%ptr = getelementptr double, double *%base, i64 511
%f2 = load double, double *%ptr
%cond = call i1 @llvm.experimental.constrained.fcmps.f64(
double %f1, double %f2,
metadata !"oeq",
metadata !"fpexcept.strict") #0
%res = select i1 %cond, i64 %a, i64 %b
ret i64 %res
}
; Check the next doubleword up, which needs separate address logic.
; Other sequences besides this one would be OK.
define i64 @f4(i64 %a, i64 %b, double %f1, double *%base) #0 {
; CHECK-LABEL: f4:
; CHECK: aghi %r4, 4096
; CHECK: kdb %f0, 0(%r4)
; CHECK-SCALAR-NEXT: ber %r14
; CHECK-SCALAR: lgr %r2, %r3
; CHECK-VECTOR-NEXT: locgrne %r2, %r3
; CHECK: br %r14
%ptr = getelementptr double, double *%base, i64 512
%f2 = load double, double *%ptr
%cond = call i1 @llvm.experimental.constrained.fcmps.f64(
double %f1, double %f2,
metadata !"oeq",
metadata !"fpexcept.strict") #0
%res = select i1 %cond, i64 %a, i64 %b
ret i64 %res
}
; Check negative displacements, which also need separate address logic.
define i64 @f5(i64 %a, i64 %b, double %f1, double *%base) #0 {
; CHECK-LABEL: f5:
; CHECK: aghi %r4, -8
; CHECK: kdb %f0, 0(%r4)
; CHECK-SCALAR-NEXT: ber %r14
; CHECK-SCALAR: lgr %r2, %r3
; CHECK-VECTOR-NEXT: locgrne %r2, %r3
; CHECK: br %r14
%ptr = getelementptr double, double *%base, i64 -1
%f2 = load double, double *%ptr
%cond = call i1 @llvm.experimental.constrained.fcmps.f64(
double %f1, double %f2,
metadata !"oeq",
metadata !"fpexcept.strict") #0
%res = select i1 %cond, i64 %a, i64 %b
ret i64 %res
}
; Check that KDB allows indices.
define i64 @f6(i64 %a, i64 %b, double %f1, double *%base, i64 %index) #0 {
; CHECK-LABEL: f6:
; CHECK: sllg %r1, %r5, 3
; CHECK: kdb %f0, 800(%r1,%r4)
; CHECK-SCALAR-NEXT: ber %r14
; CHECK-SCALAR: lgr %r2, %r3
; CHECK-VECTOR-NEXT: locgrne %r2, %r3
; CHECK: br %r14
%ptr1 = getelementptr double, double *%base, i64 %index
%ptr2 = getelementptr double, double *%ptr1, i64 100
%f2 = load double, double *%ptr2
%cond = call i1 @llvm.experimental.constrained.fcmps.f64(
double %f1, double %f2,
metadata !"oeq",
metadata !"fpexcept.strict") #0
%res = select i1 %cond, i64 %a, i64 %b
ret i64 %res
}
; Check that comparisons of spilled values can use KDB rather than KDBR.
define double @f7(double *%ptr0) #0 {
; CHECK-LABEL: f7:
; CHECK: brasl %r14, foo@PLT
; CHECK-SCALAR: kdb {{%f[0-9]+}}, 160(%r15)
; CHECK: br %r14
%ptr1 = getelementptr double, double *%ptr0, i64 2
%ptr2 = getelementptr double, double *%ptr0, i64 4
%ptr3 = getelementptr double, double *%ptr0, i64 6
%ptr4 = getelementptr double, double *%ptr0, i64 8
%ptr5 = getelementptr double, double *%ptr0, i64 10
%ptr6 = getelementptr double, double *%ptr0, i64 12
%ptr7 = getelementptr double, double *%ptr0, i64 14
%ptr8 = getelementptr double, double *%ptr0, i64 16
%ptr9 = getelementptr double, double *%ptr0, i64 18
%ptr10 = getelementptr double, double *%ptr0, i64 20
%val0 = load double, double *%ptr0
%val1 = load double, double *%ptr1
%val2 = load double, double *%ptr2
%val3 = load double, double *%ptr3
%val4 = load double, double *%ptr4
%val5 = load double, double *%ptr5
%val6 = load double, double *%ptr6
%val7 = load double, double *%ptr7
%val8 = load double, double *%ptr8
%val9 = load double, double *%ptr9
%val10 = load double, double *%ptr10
%ret = call double @foo() #0
%cmp0 = call i1 @llvm.experimental.constrained.fcmps.f64(
double %ret, double %val0,
metadata !"olt",
metadata !"fpexcept.strict") #0
%cmp1 = call i1 @llvm.experimental.constrained.fcmps.f64(
double %ret, double %val1,
metadata !"olt",
metadata !"fpexcept.strict") #0
%cmp2 = call i1 @llvm.experimental.constrained.fcmps.f64(
double %ret, double %val2,
metadata !"olt",
metadata !"fpexcept.strict") #0
%cmp3 = call i1 @llvm.experimental.constrained.fcmps.f64(
double %ret, double %val3,
metadata !"olt",
metadata !"fpexcept.strict") #0
%cmp4 = call i1 @llvm.experimental.constrained.fcmps.f64(
double %ret, double %val4,
metadata !"olt",
metadata !"fpexcept.strict") #0
%cmp5 = call i1 @llvm.experimental.constrained.fcmps.f64(
double %ret, double %val5,
metadata !"olt",
metadata !"fpexcept.strict") #0
%cmp6 = call i1 @llvm.experimental.constrained.fcmps.f64(
double %ret, double %val6,
metadata !"olt",
metadata !"fpexcept.strict") #0
%cmp7 = call i1 @llvm.experimental.constrained.fcmps.f64(
double %ret, double %val7,
metadata !"olt",
metadata !"fpexcept.strict") #0
%cmp8 = call i1 @llvm.experimental.constrained.fcmps.f64(
double %ret, double %val8,
metadata !"olt",
metadata !"fpexcept.strict") #0
%cmp9 = call i1 @llvm.experimental.constrained.fcmps.f64(
double %ret, double %val9,
metadata !"olt",
metadata !"fpexcept.strict") #0
%cmp10 = call i1 @llvm.experimental.constrained.fcmps.f64(
double %ret, double %val10,
metadata !"olt",
metadata !"fpexcept.strict") #0
%sel0 = select i1 %cmp0, double %ret, double 0.0
%sel1 = select i1 %cmp1, double %sel0, double 1.0
%sel2 = select i1 %cmp2, double %sel1, double 2.0
%sel3 = select i1 %cmp3, double %sel2, double 3.0
%sel4 = select i1 %cmp4, double %sel3, double 4.0
%sel5 = select i1 %cmp5, double %sel4, double 5.0
%sel6 = select i1 %cmp6, double %sel5, double 6.0
%sel7 = select i1 %cmp7, double %sel6, double 7.0
%sel8 = select i1 %cmp8, double %sel7, double 8.0
%sel9 = select i1 %cmp9, double %sel8, double 9.0
%sel10 = select i1 %cmp10, double %sel9, double 10.0
ret double %sel10
}
; Check comparison with zero - cannot use LOAD AND TEST.
define i64 @f8(i64 %a, i64 %b, double %f) #0 {
; CHECK-LABEL: f8:
; CHECK: lzdr [[REG:%f[0-9]+]]
; CHECK-NEXT: kdbr %f0, [[REG]]
; CHECK-SCALAR-NEXT: ber %r14
; CHECK-SCALAR: lgr %r2, %r3
; CHECK-VECTOR-NEXT: locgrne %r2, %r3
; CHECK: br %r14
%cond = call i1 @llvm.experimental.constrained.fcmps.f64(
double %f, double 0.0,
metadata !"oeq",
metadata !"fpexcept.strict") #0
%res = select i1 %cond, i64 %a, i64 %b
ret i64 %res
}
; Check the comparison can be reversed if that allows KDB to be used,
define i64 @f9(i64 %a, i64 %b, double %f2, double *%ptr) #0 {
; CHECK-LABEL: f9:
; CHECK: kdb %f0, 0(%r4)
; CHECK-SCALAR-NEXT: blr %r14
; CHECK-SCALAR: lgr %r2, %r3
; CHECK-VECTOR-NEXT: locgrnl %r2, %r3
; CHECK: br %r14
%f1 = load double, double *%ptr
%cond = call i1 @llvm.experimental.constrained.fcmps.f64(
double %f1, double %f2,
metadata !"ogt",
metadata !"fpexcept.strict") #0
%res = select i1 %cond, i64 %a, i64 %b
ret i64 %res
}
attributes #0 = { strictfp }
declare i1 @llvm.experimental.constrained.fcmps.f64(double, double, metadata, metadata)