; NOTE: Assertions have been autogenerated by utils/update_test_checks.py
; RUN: opt < %s -passes=correlated-propagation -S | FileCheck %s
target datalayout = "e-m:e-p270:32:32-p271:32:32-p272:64:64-i64:64-f80:128-n8:16:32:64-S128"
define void @test0(i32 %n) {
; CHECK-LABEL: @test0(
; CHECK-NEXT: entry:
; CHECK-NEXT: br label [[FOR_COND:%.*]]
; CHECK: for.cond:
; CHECK-NEXT: [[J_0:%.*]] = phi i32 [ [[N:%.*]], [[ENTRY:%.*]] ], [ [[DIV1:%.*]], [[FOR_BODY:%.*]] ]
; CHECK-NEXT: [[CMP:%.*]] = icmp sgt i32 [[J_0]], 1
; CHECK-NEXT: br i1 [[CMP]], label [[FOR_BODY]], label [[FOR_END:%.*]]
; CHECK: for.body:
; CHECK-NEXT: [[DIV1]] = udiv i32 [[J_0]], 2
; CHECK-NEXT: br label [[FOR_COND]]
; CHECK: for.end:
; CHECK-NEXT: ret void
;
entry:
br label %for.cond
for.cond: ; preds = %for.body, %entry
%j.0 = phi i32 [ %n, %entry ], [ %div, %for.body ]
%cmp = icmp sgt i32 %j.0, 1
br i1 %cmp, label %for.body, label %for.end
for.body: ; preds = %for.cond
%div = sdiv i32 %j.0, 2
br label %for.cond
for.end: ; preds = %for.cond
ret void
}
define void @test1(i32 %n) {
; CHECK-LABEL: @test1(
; CHECK-NEXT: entry:
; CHECK-NEXT: br label [[FOR_COND:%.*]]
; CHECK: for.cond:
; CHECK-NEXT: [[J_0:%.*]] = phi i32 [ [[N:%.*]], [[ENTRY:%.*]] ], [ [[DIV:%.*]], [[FOR_BODY:%.*]] ]
; CHECK-NEXT: [[CMP:%.*]] = icmp sgt i32 [[J_0]], -2
; CHECK-NEXT: br i1 [[CMP]], label [[FOR_BODY]], label [[FOR_END:%.*]]
; CHECK: for.body:
; CHECK-NEXT: [[DIV]] = sdiv i32 [[J_0]], 2
; CHECK-NEXT: br label [[FOR_COND]]
; CHECK: for.end:
; CHECK-NEXT: ret void
;
entry:
br label %for.cond
for.cond: ; preds = %for.body, %entry
%j.0 = phi i32 [ %n, %entry ], [ %div, %for.body ]
%cmp = icmp sgt i32 %j.0, -2
br i1 %cmp, label %for.body, label %for.end
for.body: ; preds = %for.cond
%div = sdiv i32 %j.0, 2
br label %for.cond
for.end: ; preds = %for.cond
ret void
}
define void @test2(i32 %n) {
; CHECK-LABEL: @test2(
; CHECK-NEXT: entry:
; CHECK-NEXT: [[CMP:%.*]] = icmp sgt i32 [[N:%.*]], 1
; CHECK-NEXT: br i1 [[CMP]], label [[BB:%.*]], label [[EXIT:%.*]]
; CHECK: bb:
; CHECK-NEXT: [[DIV1:%.*]] = udiv i32 [[N]], 2
; CHECK-NEXT: br label [[EXIT]]
; CHECK: exit:
; CHECK-NEXT: ret void
;
entry:
%cmp = icmp sgt i32 %n, 1
br i1 %cmp, label %bb, label %exit
bb:
%div = sdiv i32 %n, 2
br label %exit
exit:
ret void
}
; looping case where loop has exactly one block
; at the point of sdiv, we know that %a is always greater than 0,
; because of the guard before it, so we can transform it to udiv.
declare void @llvm.experimental.guard(i1,...)
define void @test4(i32 %n) {
; CHECK-LABEL: @test4(
; CHECK-NEXT: entry:
; CHECK-NEXT: [[CMP:%.*]] = icmp sgt i32 [[N:%.*]], 0
; CHECK-NEXT: br i1 [[CMP]], label [[LOOP:%.*]], label [[EXIT:%.*]]
; CHECK: loop:
; CHECK-NEXT: [[A:%.*]] = phi i32 [ [[N]], [[ENTRY:%.*]] ], [ [[DIV1:%.*]], [[LOOP]] ]
; CHECK-NEXT: [[COND:%.*]] = icmp sgt i32 [[A]], 4
; CHECK-NEXT: call void (i1, ...) @llvm.experimental.guard(i1 [[COND]]) [ "deopt"() ]
; CHECK-NEXT: [[DIV1]] = udiv i32 [[A]], 6
; CHECK-NEXT: br i1 [[COND]], label [[LOOP]], label [[EXIT]]
; CHECK: exit:
; CHECK-NEXT: ret void
;
entry:
%cmp = icmp sgt i32 %n, 0
br i1 %cmp, label %loop, label %exit
loop:
%a = phi i32 [ %n, %entry ], [ %div, %loop ]
%cond = icmp sgt i32 %a, 4
call void(i1,...) @llvm.experimental.guard(i1 %cond) [ "deopt"() ]
%div = sdiv i32 %a, 6
br i1 %cond, label %loop, label %exit
exit:
ret void
}
; same test as above with assume instead of guard.
declare void @llvm.assume(i1)
define void @test5(i32 %n) {
; CHECK-LABEL: @test5(
; CHECK-NEXT: entry:
; CHECK-NEXT: [[CMP:%.*]] = icmp sgt i32 [[N:%.*]], 0
; CHECK-NEXT: br i1 [[CMP]], label [[LOOP:%.*]], label [[EXIT:%.*]]
; CHECK: loop:
; CHECK-NEXT: [[A:%.*]] = phi i32 [ [[N]], [[ENTRY:%.*]] ], [ [[DIV1:%.*]], [[LOOP]] ]
; CHECK-NEXT: [[COND:%.*]] = icmp ugt i32 [[A]], 4
; CHECK-NEXT: call void @llvm.assume(i1 [[COND]])
; CHECK-NEXT: [[DIV1]] = udiv i32 [[A]], 6
; CHECK-NEXT: [[LOOPCOND:%.*]] = icmp ugt i32 [[DIV1]], 8
; CHECK-NEXT: br i1 [[LOOPCOND]], label [[LOOP]], label [[EXIT]]
; CHECK: exit:
; CHECK-NEXT: ret void
;
entry:
%cmp = icmp sgt i32 %n, 0
br i1 %cmp, label %loop, label %exit
loop:
%a = phi i32 [ %n, %entry ], [ %div, %loop ]
%cond = icmp sgt i32 %a, 4
call void @llvm.assume(i1 %cond)
%div = sdiv i32 %a, 6
%loopcond = icmp sgt i32 %div, 8
br i1 %loopcond, label %loop, label %exit
exit:
ret void
}
; Now, let's try various domain combinations for operands.
define i32 @test6_pos_pos(i32 %x, i32 %y) {
; CHECK-LABEL: @test6_pos_pos(
; CHECK-NEXT: [[C0:%.*]] = icmp sge i32 [[X:%.*]], 0
; CHECK-NEXT: call void @llvm.assume(i1 [[C0]])
; CHECK-NEXT: [[C1:%.*]] = icmp sge i32 [[Y:%.*]], 0
; CHECK-NEXT: call void @llvm.assume(i1 [[C1]])
; CHECK-NEXT: [[DIV1:%.*]] = udiv i32 [[X]], [[Y]]
; CHECK-NEXT: ret i32 [[DIV1]]
;
%c0 = icmp sge i32 %x, 0
call void @llvm.assume(i1 %c0)
%c1 = icmp sge i32 %y, 0
call void @llvm.assume(i1 %c1)
%div = sdiv i32 %x, %y
ret i32 %div
}
define i32 @test7_pos_neg(i32 %x, i32 %y) {
; CHECK-LABEL: @test7_pos_neg(
; CHECK-NEXT: [[C0:%.*]] = icmp sge i32 [[X:%.*]], 0
; CHECK-NEXT: call void @llvm.assume(i1 [[C0]])
; CHECK-NEXT: [[C1:%.*]] = icmp sle i32 [[Y:%.*]], 0
; CHECK-NEXT: call void @llvm.assume(i1 [[C1]])
; CHECK-NEXT: [[Y_NONNEG:%.*]] = sub i32 0, [[Y]]
; CHECK-NEXT: [[DIV1:%.*]] = udiv i32 [[X]], [[Y_NONNEG]]
; CHECK-NEXT: [[DIV1_NEG:%.*]] = sub i32 0, [[DIV1]]
; CHECK-NEXT: ret i32 [[DIV1_NEG]]
;
%c0 = icmp sge i32 %x, 0
call void @llvm.assume(i1 %c0)
%c1 = icmp sle i32 %y, 0
call void @llvm.assume(i1 %c1)
%div = sdiv i32 %x, %y
ret i32 %div
}
define i32 @test8_neg_pos(i32 %x, i32 %y) {
; CHECK-LABEL: @test8_neg_pos(
; CHECK-NEXT: [[C0:%.*]] = icmp sle i32 [[X:%.*]], 0
; CHECK-NEXT: call void @llvm.assume(i1 [[C0]])
; CHECK-NEXT: [[C1:%.*]] = icmp sge i32 [[Y:%.*]], 0
; CHECK-NEXT: call void @llvm.assume(i1 [[C1]])
; CHECK-NEXT: [[X_NONNEG:%.*]] = sub i32 0, [[X]]
; CHECK-NEXT: [[DIV1:%.*]] = udiv i32 [[X_NONNEG]], [[Y]]
; CHECK-NEXT: [[DIV1_NEG:%.*]] = sub i32 0, [[DIV1]]
; CHECK-NEXT: ret i32 [[DIV1_NEG]]
;
%c0 = icmp sle i32 %x, 0
call void @llvm.assume(i1 %c0)
%c1 = icmp sge i32 %y, 0
call void @llvm.assume(i1 %c1)
%div = sdiv i32 %x, %y
ret i32 %div
}
define i32 @test9_neg_neg(i32 %x, i32 %y) {
; CHECK-LABEL: @test9_neg_neg(
; CHECK-NEXT: [[C0:%.*]] = icmp sle i32 [[X:%.*]], 0
; CHECK-NEXT: call void @llvm.assume(i1 [[C0]])
; CHECK-NEXT: [[C1:%.*]] = icmp sle i32 [[Y:%.*]], 0
; CHECK-NEXT: call void @llvm.assume(i1 [[C1]])
; CHECK-NEXT: [[X_NONNEG:%.*]] = sub i32 0, [[X]]
; CHECK-NEXT: [[Y_NONNEG:%.*]] = sub i32 0, [[Y]]
; CHECK-NEXT: [[DIV1:%.*]] = udiv i32 [[X_NONNEG]], [[Y_NONNEG]]
; CHECK-NEXT: ret i32 [[DIV1]]
;
%c0 = icmp sle i32 %x, 0
call void @llvm.assume(i1 %c0)
%c1 = icmp sle i32 %y, 0
call void @llvm.assume(i1 %c1)
%div = sdiv i32 %x, %y
ret i32 %div
}
; After making division unsigned, can we narrow it?
define i32 @test10_narrow(i32 %x, i32 %y) {
; CHECK-LABEL: @test10_narrow(
; CHECK-NEXT: [[C0:%.*]] = icmp ult i32 [[X:%.*]], 128
; CHECK-NEXT: call void @llvm.assume(i1 [[C0]])
; CHECK-NEXT: [[C1:%.*]] = icmp ult i32 [[Y:%.*]], 128
; CHECK-NEXT: call void @llvm.assume(i1 [[C1]])
; CHECK-NEXT: [[DIV1_LHS_TRUNC:%.*]] = trunc i32 [[X]] to i8
; CHECK-NEXT: [[DIV1_RHS_TRUNC:%.*]] = trunc i32 [[Y]] to i8
; CHECK-NEXT: [[DIV12:%.*]] = udiv i8 [[DIV1_LHS_TRUNC]], [[DIV1_RHS_TRUNC]]
; CHECK-NEXT: [[DIV1_ZEXT:%.*]] = zext i8 [[DIV12]] to i32
; CHECK-NEXT: ret i32 [[DIV1_ZEXT]]
;
%c0 = icmp ult i32 %x, 128
call void @llvm.assume(i1 %c0)
%c1 = icmp ult i32 %y, 128
call void @llvm.assume(i1 %c1)
%div = sdiv i32 %x, %y
ret i32 %div
}
; Ok, but what about narrowing sdiv in general?
; If both operands are i15, it's uncontroversial - we can truncate to i16
define i64 @test11_i15_i15(i64 %x, i64 %y) {
; CHECK-LABEL: @test11_i15_i15(
; CHECK-NEXT: entry:
; CHECK-NEXT: [[C0:%.*]] = icmp sle i64 [[X:%.*]], 16383
; CHECK-NEXT: call void @llvm.assume(i1 [[C0]])
; CHECK-NEXT: [[C1:%.*]] = icmp sge i64 [[X]], -16384
; CHECK-NEXT: call void @llvm.assume(i1 [[C1]])
; CHECK-NEXT: [[C2:%.*]] = icmp sle i64 [[Y:%.*]], 16383
; CHECK-NEXT: call void @llvm.assume(i1 [[C2]])
; CHECK-NEXT: [[C3:%.*]] = icmp sge i64 [[Y]], -16384
; CHECK-NEXT: call void @llvm.assume(i1 [[C3]])
; CHECK-NEXT: [[DIV_LHS_TRUNC:%.*]] = trunc i64 [[X]] to i16
; CHECK-NEXT: [[DIV_RHS_TRUNC:%.*]] = trunc i64 [[Y]] to i16
; CHECK-NEXT: [[DIV1:%.*]] = sdiv i16 [[DIV_LHS_TRUNC]], [[DIV_RHS_TRUNC]]
; CHECK-NEXT: [[DIV_SEXT:%.*]] = sext i16 [[DIV1]] to i64
; CHECK-NEXT: ret i64 [[DIV_SEXT]]
;
entry:
%c0 = icmp sle i64 %x, 16383
call void @llvm.assume(i1 %c0)
%c1 = icmp sge i64 %x, -16384
call void @llvm.assume(i1 %c1)
%c2 = icmp sle i64 %y, 16383
call void @llvm.assume(i1 %c2)
%c3 = icmp sge i64 %y, -16384
call void @llvm.assume(i1 %c3)
%div = sdiv i64 %x, %y
ret i64 %div
}
; But if operands are i16, we can only truncate to i32, because we can't
; rule out UB of i16 INT_MIN s/ i16 -1
define i64 @test12_i16_i16(i64 %x, i64 %y) {
; CHECK-LABEL: @test12_i16_i16(
; CHECK-NEXT: entry:
; CHECK-NEXT: [[C0:%.*]] = icmp sle i64 [[X:%.*]], 32767
; CHECK-NEXT: call void @llvm.assume(i1 [[C0]])
; CHECK-NEXT: [[C1:%.*]] = icmp sge i64 [[X]], -32768
; CHECK-NEXT: call void @llvm.assume(i1 [[C1]])
; CHECK-NEXT: [[C2:%.*]] = icmp sle i64 [[Y:%.*]], 32767
; CHECK-NEXT: call void @llvm.assume(i1 [[C2]])
; CHECK-NEXT: [[C3:%.*]] = icmp sge i64 [[Y]], -32768
; CHECK-NEXT: call void @llvm.assume(i1 [[C3]])
; CHECK-NEXT: [[DIV_LHS_TRUNC:%.*]] = trunc i64 [[X]] to i32
; CHECK-NEXT: [[DIV_RHS_TRUNC:%.*]] = trunc i64 [[Y]] to i32
; CHECK-NEXT: [[DIV1:%.*]] = sdiv i32 [[DIV_LHS_TRUNC]], [[DIV_RHS_TRUNC]]
; CHECK-NEXT: [[DIV_SEXT:%.*]] = sext i32 [[DIV1]] to i64
; CHECK-NEXT: ret i64 [[DIV_SEXT]]
;
entry:
%c0 = icmp sle i64 %x, 32767
call void @llvm.assume(i1 %c0)
%c1 = icmp sge i64 %x, -32768
call void @llvm.assume(i1 %c1)
%c2 = icmp sle i64 %y, 32767
call void @llvm.assume(i1 %c2)
%c3 = icmp sge i64 %y, -32768
call void @llvm.assume(i1 %c3)
%div = sdiv i64 %x, %y
ret i64 %div
}
; But if divident is i16, and divisor is u15, then we know that i16 is UB-safe.
define i64 @test13_i16_u15(i64 %x, i64 %y) {
; CHECK-LABEL: @test13_i16_u15(
; CHECK-NEXT: entry:
; CHECK-NEXT: [[C0:%.*]] = icmp sle i64 [[X:%.*]], 32767
; CHECK-NEXT: call void @llvm.assume(i1 [[C0]])
; CHECK-NEXT: [[C1:%.*]] = icmp sge i64 [[X]], -32768
; CHECK-NEXT: call void @llvm.assume(i1 [[C1]])
; CHECK-NEXT: [[C2:%.*]] = icmp ule i64 [[Y:%.*]], 32767
; CHECK-NEXT: call void @llvm.assume(i1 [[C2]])
; CHECK-NEXT: [[DIV_LHS_TRUNC:%.*]] = trunc i64 [[X]] to i16
; CHECK-NEXT: [[DIV_RHS_TRUNC:%.*]] = trunc i64 [[Y]] to i16
; CHECK-NEXT: [[DIV1:%.*]] = sdiv i16 [[DIV_LHS_TRUNC]], [[DIV_RHS_TRUNC]]
; CHECK-NEXT: [[DIV_SEXT:%.*]] = sext i16 [[DIV1]] to i64
; CHECK-NEXT: ret i64 [[DIV_SEXT]]
;
entry:
%c0 = icmp sle i64 %x, 32767
call void @llvm.assume(i1 %c0)
%c1 = icmp sge i64 %x, -32768
call void @llvm.assume(i1 %c1)
%c2 = icmp ule i64 %y, 32767
call void @llvm.assume(i1 %c2)
%div = sdiv i64 %x, %y
ret i64 %div
}
; And likewise, if we know that if the divident is never i16 INT_MIN,
; we can truncate to i16.
define i64 @test14_i16safe_i16(i64 %x, i64 %y) {
; CHECK-LABEL: @test14_i16safe_i16(
; CHECK-NEXT: entry:
; CHECK-NEXT: [[C0:%.*]] = icmp sle i64 [[X:%.*]], 32767
; CHECK-NEXT: call void @llvm.assume(i1 [[C0]])
; CHECK-NEXT: [[C1:%.*]] = icmp sgt i64 [[X]], -32768
; CHECK-NEXT: call void @llvm.assume(i1 [[C1]])
; CHECK-NEXT: [[C2:%.*]] = icmp sle i64 [[Y:%.*]], 32767
; CHECK-NEXT: call void @llvm.assume(i1 [[C2]])
; CHECK-NEXT: [[C3:%.*]] = icmp sge i64 [[Y]], -32768
; CHECK-NEXT: call void @llvm.assume(i1 [[C3]])
; CHECK-NEXT: [[DIV_LHS_TRUNC:%.*]] = trunc i64 [[X]] to i16
; CHECK-NEXT: [[DIV_RHS_TRUNC:%.*]] = trunc i64 [[Y]] to i16
; CHECK-NEXT: [[DIV1:%.*]] = sdiv i16 [[DIV_LHS_TRUNC]], [[DIV_RHS_TRUNC]]
; CHECK-NEXT: [[DIV_SEXT:%.*]] = sext i16 [[DIV1]] to i64
; CHECK-NEXT: ret i64 [[DIV_SEXT]]
;
entry:
%c0 = icmp sle i64 %x, 32767
call void @llvm.assume(i1 %c0)
%c1 = icmp sgt i64 %x, -32768
call void @llvm.assume(i1 %c1)
%c2 = icmp sle i64 %y, 32767
call void @llvm.assume(i1 %c2)
%c3 = icmp sge i64 %y, -32768
call void @llvm.assume(i1 %c3)
%div = sdiv i64 %x, %y
ret i64 %div
}
; Of course, both of the conditions can happen at once.
define i64 @test15_i16safe_u15(i64 %x, i64 %y) {
; CHECK-LABEL: @test15_i16safe_u15(
; CHECK-NEXT: entry:
; CHECK-NEXT: [[C0:%.*]] = icmp sle i64 [[X:%.*]], 32767
; CHECK-NEXT: call void @llvm.assume(i1 [[C0]])
; CHECK-NEXT: [[C1:%.*]] = icmp sgt i64 [[X]], -32768
; CHECK-NEXT: call void @llvm.assume(i1 [[C1]])
; CHECK-NEXT: [[C2:%.*]] = icmp ule i64 [[Y:%.*]], 32767
; CHECK-NEXT: call void @llvm.assume(i1 [[C2]])
; CHECK-NEXT: [[DIV_LHS_TRUNC:%.*]] = trunc i64 [[X]] to i16
; CHECK-NEXT: [[DIV_RHS_TRUNC:%.*]] = trunc i64 [[Y]] to i16
; CHECK-NEXT: [[DIV1:%.*]] = sdiv i16 [[DIV_LHS_TRUNC]], [[DIV_RHS_TRUNC]]
; CHECK-NEXT: [[DIV_SEXT:%.*]] = sext i16 [[DIV1]] to i64
; CHECK-NEXT: ret i64 [[DIV_SEXT]]
;
entry:
%c0 = icmp sle i64 %x, 32767
call void @llvm.assume(i1 %c0)
%c1 = icmp sgt i64 %x, -32768
call void @llvm.assume(i1 %c1)
%c2 = icmp ule i64 %y, 32767
call void @llvm.assume(i1 %c2)
%div = sdiv i64 %x, %y
ret i64 %div
}
; We at most truncate to i8
define i64 @test16_i4_i4(i64 %x, i64 %y) {
; CHECK-LABEL: @test16_i4_i4(
; CHECK-NEXT: entry:
; CHECK-NEXT: [[C0:%.*]] = icmp sle i64 [[X:%.*]], 3
; CHECK-NEXT: call void @llvm.assume(i1 [[C0]])
; CHECK-NEXT: [[C1:%.*]] = icmp sge i64 [[X]], -4
; CHECK-NEXT: call void @llvm.assume(i1 [[C1]])
; CHECK-NEXT: [[C2:%.*]] = icmp sle i64 [[Y:%.*]], 3
; CHECK-NEXT: call void @llvm.assume(i1 [[C2]])
; CHECK-NEXT: [[C3:%.*]] = icmp sge i64 [[Y]], -4
; CHECK-NEXT: call void @llvm.assume(i1 [[C3]])
; CHECK-NEXT: [[DIV_LHS_TRUNC:%.*]] = trunc i64 [[X]] to i8
; CHECK-NEXT: [[DIV_RHS_TRUNC:%.*]] = trunc i64 [[Y]] to i8
; CHECK-NEXT: [[DIV1:%.*]] = sdiv i8 [[DIV_LHS_TRUNC]], [[DIV_RHS_TRUNC]]
; CHECK-NEXT: [[DIV_SEXT:%.*]] = sext i8 [[DIV1]] to i64
; CHECK-NEXT: ret i64 [[DIV_SEXT]]
;
entry:
%c0 = icmp sle i64 %x, 3
call void @llvm.assume(i1 %c0)
%c1 = icmp sge i64 %x, -4
call void @llvm.assume(i1 %c1)
%c2 = icmp sle i64 %y, 3
call void @llvm.assume(i1 %c2)
%c3 = icmp sge i64 %y, -4
call void @llvm.assume(i1 %c3)
%div = sdiv i64 %x, %y
ret i64 %div
}
; And we round up to the powers of two
define i64 @test17_i9_i9(i64 %x, i64 %y) {
; CHECK-LABEL: @test17_i9_i9(
; CHECK-NEXT: entry:
; CHECK-NEXT: [[C0:%.*]] = icmp sle i64 [[X:%.*]], 255
; CHECK-NEXT: call void @llvm.assume(i1 [[C0]])
; CHECK-NEXT: [[C1:%.*]] = icmp sge i64 [[X]], -256
; CHECK-NEXT: call void @llvm.assume(i1 [[C1]])
; CHECK-NEXT: [[C2:%.*]] = icmp sle i64 [[Y:%.*]], 255
; CHECK-NEXT: call void @llvm.assume(i1 [[C2]])
; CHECK-NEXT: [[C3:%.*]] = icmp sge i64 [[Y]], -256
; CHECK-NEXT: call void @llvm.assume(i1 [[C3]])
; CHECK-NEXT: [[DIV_LHS_TRUNC:%.*]] = trunc i64 [[X]] to i16
; CHECK-NEXT: [[DIV_RHS_TRUNC:%.*]] = trunc i64 [[Y]] to i16
; CHECK-NEXT: [[DIV1:%.*]] = sdiv i16 [[DIV_LHS_TRUNC]], [[DIV_RHS_TRUNC]]
; CHECK-NEXT: [[DIV_SEXT:%.*]] = sext i16 [[DIV1]] to i64
; CHECK-NEXT: ret i64 [[DIV_SEXT]]
;
entry:
%c0 = icmp sle i64 %x, 255
call void @llvm.assume(i1 %c0)
%c1 = icmp sge i64 %x, -256
call void @llvm.assume(i1 %c1)
%c2 = icmp sle i64 %y, 255
call void @llvm.assume(i1 %c2)
%c3 = icmp sge i64 %y, -256
call void @llvm.assume(i1 %c3)
%div = sdiv i64 %x, %y
ret i64 %div
}
; Don't widen the operation to the next power of two if it wasn't a power of two.
define i9 @test18_i9_i9(i9 %x, i9 %y) {
; CHECK-LABEL: @test18_i9_i9(
; CHECK-NEXT: entry:
; CHECK-NEXT: [[C0:%.*]] = icmp sle i9 [[X:%.*]], 255
; CHECK-NEXT: call void @llvm.assume(i1 [[C0]])
; CHECK-NEXT: [[C1:%.*]] = icmp sge i9 [[X]], -256
; CHECK-NEXT: call void @llvm.assume(i1 [[C1]])
; CHECK-NEXT: [[C2:%.*]] = icmp sle i9 [[Y:%.*]], 255
; CHECK-NEXT: call void @llvm.assume(i1 [[C2]])
; CHECK-NEXT: [[C3:%.*]] = icmp sge i9 [[Y]], -256
; CHECK-NEXT: call void @llvm.assume(i1 [[C3]])
; CHECK-NEXT: [[DIV:%.*]] = sdiv i9 [[X]], [[Y]]
; CHECK-NEXT: ret i9 [[DIV]]
;
entry:
%c0 = icmp sle i9 %x, 255
call void @llvm.assume(i1 %c0)
%c1 = icmp sge i9 %x, -256
call void @llvm.assume(i1 %c1)
%c2 = icmp sle i9 %y, 255
call void @llvm.assume(i1 %c2)
%c3 = icmp sge i9 %y, -256
call void @llvm.assume(i1 %c3)
%div = sdiv i9 %x, %y
ret i9 %div
}
define i10 @test19_i10_i10(i10 %x, i10 %y) {
; CHECK-LABEL: @test19_i10_i10(
; CHECK-NEXT: entry:
; CHECK-NEXT: [[C0:%.*]] = icmp sle i10 [[X:%.*]], 255
; CHECK-NEXT: call void @llvm.assume(i1 [[C0]])
; CHECK-NEXT: [[C1:%.*]] = icmp sge i10 [[X]], -256
; CHECK-NEXT: call void @llvm.assume(i1 [[C1]])
; CHECK-NEXT: [[C2:%.*]] = icmp sle i10 [[Y:%.*]], 255
; CHECK-NEXT: call void @llvm.assume(i1 [[C2]])
; CHECK-NEXT: [[C3:%.*]] = icmp sge i10 [[Y]], -256
; CHECK-NEXT: call void @llvm.assume(i1 [[C3]])
; CHECK-NEXT: [[DIV:%.*]] = sdiv i10 [[X]], [[Y]]
; CHECK-NEXT: ret i10 [[DIV]]
;
entry:
%c0 = icmp sle i10 %x, 255
call void @llvm.assume(i1 %c0)
%c1 = icmp sge i10 %x, -256
call void @llvm.assume(i1 %c1)
%c2 = icmp sle i10 %y, 255
call void @llvm.assume(i1 %c2)
%c3 = icmp sge i10 %y, -256
call void @llvm.assume(i1 %c3)
%div = sdiv i10 %x, %y
ret i10 %div
}
; Note that we need to take the maximal bitwidth, in which both of the operands are representable!
define i64 @test20_i16_i18(i64 %x, i64 %y) {
; CHECK-LABEL: @test20_i16_i18(
; CHECK-NEXT: entry:
; CHECK-NEXT: [[C0:%.*]] = icmp sle i64 [[X:%.*]], 16383
; CHECK-NEXT: call void @llvm.assume(i1 [[C0]])
; CHECK-NEXT: [[C1:%.*]] = icmp sge i64 [[X]], -16384
; CHECK-NEXT: call void @llvm.assume(i1 [[C1]])
; CHECK-NEXT: [[C2:%.*]] = icmp sle i64 [[Y:%.*]], 65535
; CHECK-NEXT: call void @llvm.assume(i1 [[C2]])
; CHECK-NEXT: [[C3:%.*]] = icmp sge i64 [[Y]], -65536
; CHECK-NEXT: call void @llvm.assume(i1 [[C3]])
; CHECK-NEXT: [[DIV_LHS_TRUNC:%.*]] = trunc i64 [[X]] to i32
; CHECK-NEXT: [[DIV_RHS_TRUNC:%.*]] = trunc i64 [[Y]] to i32
; CHECK-NEXT: [[DIV1:%.*]] = sdiv i32 [[DIV_LHS_TRUNC]], [[DIV_RHS_TRUNC]]
; CHECK-NEXT: [[DIV_SEXT:%.*]] = sext i32 [[DIV1]] to i64
; CHECK-NEXT: ret i64 [[DIV_SEXT]]
;
entry:
%c0 = icmp sle i64 %x, 16383
call void @llvm.assume(i1 %c0)
%c1 = icmp sge i64 %x, -16384
call void @llvm.assume(i1 %c1)
%c2 = icmp sle i64 %y, 65535
call void @llvm.assume(i1 %c2)
%c3 = icmp sge i64 %y, -65536
call void @llvm.assume(i1 %c3)
%div = sdiv i64 %x, %y
ret i64 %div
}
define i64 @test21_i18_i16(i64 %x, i64 %y) {
; CHECK-LABEL: @test21_i18_i16(
; CHECK-NEXT: entry:
; CHECK-NEXT: [[C0:%.*]] = icmp sle i64 [[X:%.*]], 65535
; CHECK-NEXT: call void @llvm.assume(i1 [[C0]])
; CHECK-NEXT: [[C1:%.*]] = icmp sge i64 [[X]], -65536
; CHECK-NEXT: call void @llvm.assume(i1 [[C1]])
; CHECK-NEXT: [[C2:%.*]] = icmp sle i64 [[Y:%.*]], 16383
; CHECK-NEXT: call void @llvm.assume(i1 [[C2]])
; CHECK-NEXT: [[C3:%.*]] = icmp sge i64 [[Y]], -16384
; CHECK-NEXT: call void @llvm.assume(i1 [[C3]])
; CHECK-NEXT: [[DIV_LHS_TRUNC:%.*]] = trunc i64 [[X]] to i32
; CHECK-NEXT: [[DIV_RHS_TRUNC:%.*]] = trunc i64 [[Y]] to i32
; CHECK-NEXT: [[DIV1:%.*]] = sdiv i32 [[DIV_LHS_TRUNC]], [[DIV_RHS_TRUNC]]
; CHECK-NEXT: [[DIV_SEXT:%.*]] = sext i32 [[DIV1]] to i64
; CHECK-NEXT: ret i64 [[DIV_SEXT]]
;
entry:
%c0 = icmp sle i64 %x, 65535
call void @llvm.assume(i1 %c0)
%c1 = icmp sge i64 %x, -65536
call void @llvm.assume(i1 %c1)
%c2 = icmp sle i64 %y, 16383
call void @llvm.assume(i1 %c2)
%c3 = icmp sge i64 %y, -16384
call void @llvm.assume(i1 %c3)
%div = sdiv i64 %x, %y
ret i64 %div
}
; Ensure that we preserve exact-ness
define i64 @test22_i16_i16(i64 %x, i64 %y) {
; CHECK-LABEL: @test22_i16_i16(
; CHECK-NEXT: entry:
; CHECK-NEXT: [[C0:%.*]] = icmp sle i64 [[X:%.*]], 32767
; CHECK-NEXT: call void @llvm.assume(i1 [[C0]])
; CHECK-NEXT: [[C1:%.*]] = icmp sge i64 [[X]], -32768
; CHECK-NEXT: call void @llvm.assume(i1 [[C1]])
; CHECK-NEXT: [[C2:%.*]] = icmp sle i64 [[Y:%.*]], 32767
; CHECK-NEXT: call void @llvm.assume(i1 [[C2]])
; CHECK-NEXT: [[C3:%.*]] = icmp sge i64 [[Y]], -32768
; CHECK-NEXT: call void @llvm.assume(i1 [[C3]])
; CHECK-NEXT: [[DIV_LHS_TRUNC:%.*]] = trunc i64 [[X]] to i32
; CHECK-NEXT: [[DIV_RHS_TRUNC:%.*]] = trunc i64 [[Y]] to i32
; CHECK-NEXT: [[DIV1:%.*]] = sdiv exact i32 [[DIV_LHS_TRUNC]], [[DIV_RHS_TRUNC]]
; CHECK-NEXT: [[DIV_SEXT:%.*]] = sext i32 [[DIV1]] to i64
; CHECK-NEXT: ret i64 [[DIV_SEXT]]
;
entry:
%c0 = icmp sle i64 %x, 32767
call void @llvm.assume(i1 %c0)
%c1 = icmp sge i64 %x, -32768
call void @llvm.assume(i1 %c1)
%c2 = icmp sle i64 %y, 32767
call void @llvm.assume(i1 %c2)
%c3 = icmp sge i64 %y, -32768
call void @llvm.assume(i1 %c3)
%div = sdiv exact i64 %x, %y
ret i64 %div
}