# NOTE: Assertions have been autogenerated by utils/update_mca_test_checks.py
# RUN: llvm-mca -mtriple=x86_64-unknown-unknown -mcpu=btver2 -timeline -timeline-max-iterations=3 -iterations=1500 < %s | FileCheck %s
# perf stat reports an IPC of 2.00 for this block of code.
# All of the vector packed compares from this test are zero idioms. These zero
# idioms are all detected and removed by the register renamer. That means, no
# uOp is executed, and there is no RAW dependency for any of the packed
# compares.
vpcmpgtb %xmm0, %xmm0, %xmm1
vpcmpgtw %xmm1, %xmm1, %xmm2
vpcmpgtd %xmm2, %xmm2, %xmm3
vpcmpgtq %xmm3, %xmm3, %xmm0
# CHECK: Iterations: 1500
# CHECK-NEXT: Instructions: 6000
# CHECK-NEXT: Total Cycles: 3001
# CHECK-NEXT: Total uOps: 6000
# CHECK: Dispatch Width: 2
# CHECK-NEXT: uOps Per Cycle: 2.00
# CHECK-NEXT: IPC: 2.00
# CHECK-NEXT: Block RThroughput: 2.0
# CHECK: Instruction Info:
# CHECK-NEXT: [1]: #uOps
# CHECK-NEXT: [2]: Latency
# CHECK-NEXT: [3]: RThroughput
# CHECK-NEXT: [4]: MayLoad
# CHECK-NEXT: [5]: MayStore
# CHECK-NEXT: [6]: HasSideEffects (U)
# CHECK: [1] [2] [3] [4] [5] [6] Instructions:
# CHECK-NEXT: 1 0 0.50 vpcmpgtb %xmm0, %xmm0, %xmm1
# CHECK-NEXT: 1 0 0.50 vpcmpgtw %xmm1, %xmm1, %xmm2
# CHECK-NEXT: 1 0 0.50 vpcmpgtd %xmm2, %xmm2, %xmm3
# CHECK-NEXT: 1 0 0.50 vpcmpgtq %xmm3, %xmm3, %xmm0
# CHECK: Resources:
# CHECK-NEXT: [0] - JALU0
# CHECK-NEXT: [1] - JALU1
# CHECK-NEXT: [2] - JDiv
# CHECK-NEXT: [3] - JFPA
# CHECK-NEXT: [4] - JFPM
# CHECK-NEXT: [5] - JFPU0
# CHECK-NEXT: [6] - JFPU1
# CHECK-NEXT: [7] - JLAGU
# CHECK-NEXT: [8] - JMul
# CHECK-NEXT: [9] - JSAGU
# CHECK-NEXT: [10] - JSTC
# CHECK-NEXT: [11] - JVALU0
# CHECK-NEXT: [12] - JVALU1
# CHECK-NEXT: [13] - JVIMUL
# CHECK: Resource pressure per iteration:
# CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13]
# CHECK-NEXT: - - - - - - - - - - - - - -
# CHECK: Resource pressure by instruction:
# CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] Instructions:
# CHECK-NEXT: - - - - - - - - - - - - - - vpcmpgtb %xmm0, %xmm0, %xmm1
# CHECK-NEXT: - - - - - - - - - - - - - - vpcmpgtw %xmm1, %xmm1, %xmm2
# CHECK-NEXT: - - - - - - - - - - - - - - vpcmpgtd %xmm2, %xmm2, %xmm3
# CHECK-NEXT: - - - - - - - - - - - - - - vpcmpgtq %xmm3, %xmm3, %xmm0
# CHECK: Timeline view:
# CHECK-NEXT: Index 0123456
# CHECK: [0,0] DR .. vpcmpgtb %xmm0, %xmm0, %xmm1
# CHECK-NEXT: [0,1] DR .. vpcmpgtw %xmm1, %xmm1, %xmm2
# CHECK-NEXT: [0,2] .DR .. vpcmpgtd %xmm2, %xmm2, %xmm3
# CHECK-NEXT: [0,3] .DR .. vpcmpgtq %xmm3, %xmm3, %xmm0
# CHECK-NEXT: [1,0] . DR .. vpcmpgtb %xmm0, %xmm0, %xmm1
# CHECK-NEXT: [1,1] . DR .. vpcmpgtw %xmm1, %xmm1, %xmm2
# CHECK-NEXT: [1,2] . DR.. vpcmpgtd %xmm2, %xmm2, %xmm3
# CHECK-NEXT: [1,3] . DR.. vpcmpgtq %xmm3, %xmm3, %xmm0
# CHECK-NEXT: [2,0] . DR. vpcmpgtb %xmm0, %xmm0, %xmm1
# CHECK-NEXT: [2,1] . DR. vpcmpgtw %xmm1, %xmm1, %xmm2
# CHECK-NEXT: [2,2] . DR vpcmpgtd %xmm2, %xmm2, %xmm3
# CHECK-NEXT: [2,3] . DR vpcmpgtq %xmm3, %xmm3, %xmm0
# CHECK: Average Wait times (based on the timeline view):
# CHECK-NEXT: [0]: Executions
# CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue
# CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready
# CHECK-NEXT: [3]: Average time elapsed from WB until retire stage
# CHECK: [0] [1] [2] [3]
# CHECK-NEXT: 0. 3 0.0 0.0 0.0 vpcmpgtb %xmm0, %xmm0, %xmm1
# CHECK-NEXT: 1. 3 0.0 0.0 0.0 vpcmpgtw %xmm1, %xmm1, %xmm2
# CHECK-NEXT: 2. 3 0.0 0.0 0.0 vpcmpgtd %xmm2, %xmm2, %xmm3
# CHECK-NEXT: 3. 3 0.0 0.0 0.0 vpcmpgtq %xmm3, %xmm3, %xmm0
# CHECK-NEXT: 3 0.0 0.0 0.0 <total>