# NOTE: Assertions have been autogenerated by utils/update_mca_test_checks.py
# RUN: llvm-mca -mtriple=x86_64-unknown-unknown -mcpu=x86-64 -scheduler-stats -dispatch-stats -iterations=100 -timeline -timeline-max-iterations=1 < %s | FileCheck %s
# LLVM-MCA-BEGIN
, %spl
, %bpl
, %sil
, %dil
# LLVM-MCA-END
# LLVM-MCA-BEGIN
, %sp
, %bp
, %si
, %di
# LLVM-MCA-END
# LLVM-MCA-BEGIN
, %esp
, %ebp
, %esi
, %edi
# LLVM-MCA-END
# LLVM-MCA-BEGIN
, %rsp
, %rbp
, %rsi
, %rdi
# LLVM-MCA-END
# LLVM-MCA-BEGIN
, %mm0
, %mm1
, %mm2
, %mm3
# LLVM-MCA-END
# LLVM-MCA-BEGIN
, %xmm0
, %xmm1
, %xmm2
, %xmm3
# LLVM-MCA-END
# CHECK: [0] Code Region
# CHECK: Iterations: 100
# CHECK-NEXT: Instructions: 400
# CHECK-NEXT: Total Cycles: 207
# CHECK-NEXT: Total uOps: 400
# CHECK: Dispatch Width: 4
# CHECK-NEXT: uOps Per Cycle: 1.93
# CHECK-NEXT: IPC: 1.93
# CHECK-NEXT: Block RThroughput: 2.0
# CHECK: Instruction Info:
# CHECK-NEXT: [1]: #uOps
# CHECK-NEXT: [2]: Latency
# CHECK-NEXT: [3]: RThroughput
# CHECK-NEXT: [4]: MayLoad
# CHECK-NEXT: [5]: MayStore
# CHECK-NEXT: [6]: HasSideEffects (U)
# CHECK: [1] [2] [3] [4] [5] [6] Instructions:
# CHECK-NEXT: 1 5 0.50 * movb (%rax), %spl
# CHECK-NEXT: 1 5 0.50 * movb (%rcx), %bpl
# CHECK-NEXT: 1 5 0.50 * movb (%rdx), %sil
# CHECK-NEXT: 1 5 0.50 * movb (%rbx), %dil
# CHECK: Dynamic Dispatch Stall Cycles:
# CHECK-NEXT: RAT - Register unavailable: 0
# CHECK-NEXT: RCU - Retire tokens unavailable: 0
# CHECK-NEXT: SCHEDQ - Scheduler full: 147 (71.0%)
# CHECK-NEXT: LQ - Load queue full: 0
# CHECK-NEXT: SQ - Store queue full: 0
# CHECK-NEXT: GROUP - Static restrictions on the dispatch group: 0
# CHECK-NEXT: USH - Uncategorised Structural Hazard: 0
# CHECK: Dispatch Logic - number of cycles where we saw N micro opcodes dispatched:
# CHECK-NEXT: [# dispatched], [# cycles]
# CHECK-NEXT: 0, 33 (15.9%)
# CHECK-NEXT: 2, 148 (71.5%)
# CHECK-NEXT: 4, 26 (12.6%)
# CHECK: Schedulers - number of cycles where we saw N micro opcodes issued:
# CHECK-NEXT: [# issued], [# cycles]
# CHECK-NEXT: 0, 7 (3.4%)
# CHECK-NEXT: 2, 200 (96.6%)
# CHECK: Scheduler's queue usage:
# CHECK-NEXT: [1] Resource name.
# CHECK-NEXT: [2] Average number of used buffer entries.
# CHECK-NEXT: [3] Maximum number of used buffer entries.
# CHECK-NEXT: [4] Total number of buffer entries.
# CHECK: [1] [2] [3] [4]
# CHECK-NEXT: SBPortAny 45 54 54
# CHECK: Resources:
# CHECK-NEXT: [0] - SBDivider
# CHECK-NEXT: [1] - SBFPDivider
# CHECK-NEXT: [2] - SBPort0
# CHECK-NEXT: [3] - SBPort1
# CHECK-NEXT: [4] - SBPort4
# CHECK-NEXT: [5] - SBPort5
# CHECK-NEXT: [6.0] - SBPort23
# CHECK-NEXT: [6.1] - SBPort23
# CHECK: Resource pressure per iteration:
# CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6.0] [6.1]
# CHECK-NEXT: - - - - - - 2.00 2.00
# CHECK: Resource pressure by instruction:
# CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6.0] [6.1] Instructions:
# CHECK-NEXT: - - - - - - - 1.00 movb (%rax), %spl
# CHECK-NEXT: - - - - - - 1.00 - movb (%rcx), %bpl
# CHECK-NEXT: - - - - - - - 1.00 movb (%rdx), %sil
# CHECK-NEXT: - - - - - - 1.00 - movb (%rbx), %dil
# CHECK: Timeline view:
# CHECK-NEXT: Index 012345678
# CHECK: [0,0] DeeeeeER. movb (%rax), %spl
# CHECK-NEXT: [0,1] DeeeeeER. movb (%rcx), %bpl
# CHECK-NEXT: [0,2] D=eeeeeER movb (%rdx), %sil
# CHECK-NEXT: [0,3] D=eeeeeER movb (%rbx), %dil
# CHECK: Average Wait times (based on the timeline view):
# CHECK-NEXT: [0]: Executions
# CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue
# CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready
# CHECK-NEXT: [3]: Average time elapsed from WB until retire stage
# CHECK: [0] [1] [2] [3]
# CHECK-NEXT: 0. 1 1.0 1.0 0.0 movb (%rax), %spl
# CHECK-NEXT: 1. 1 1.0 1.0 0.0 movb (%rcx), %bpl
# CHECK-NEXT: 2. 1 2.0 2.0 0.0 movb (%rdx), %sil
# CHECK-NEXT: 3. 1 2.0 2.0 0.0 movb (%rbx), %dil
# CHECK-NEXT: 1 1.5 1.5 0.0 <total>
# CHECK: [1] Code Region
# CHECK: Iterations: 100
# CHECK-NEXT: Instructions: 400
# CHECK-NEXT: Total Cycles: 207
# CHECK-NEXT: Total uOps: 400
# CHECK: Dispatch Width: 4
# CHECK-NEXT: uOps Per Cycle: 1.93
# CHECK-NEXT: IPC: 1.93
# CHECK-NEXT: Block RThroughput: 2.0
# CHECK: Instruction Info:
# CHECK-NEXT: [1]: #uOps
# CHECK-NEXT: [2]: Latency
# CHECK-NEXT: [3]: RThroughput
# CHECK-NEXT: [4]: MayLoad
# CHECK-NEXT: [5]: MayStore
# CHECK-NEXT: [6]: HasSideEffects (U)
# CHECK: [1] [2] [3] [4] [5] [6] Instructions:
# CHECK-NEXT: 1 5 0.50 * movw (%rax), %sp
# CHECK-NEXT: 1 5 0.50 * movw (%rcx), %bp
# CHECK-NEXT: 1 5 0.50 * movw (%rdx), %si
# CHECK-NEXT: 1 5 0.50 * movw (%rbx), %di
# CHECK: Dynamic Dispatch Stall Cycles:
# CHECK-NEXT: RAT - Register unavailable: 0
# CHECK-NEXT: RCU - Retire tokens unavailable: 0
# CHECK-NEXT: SCHEDQ - Scheduler full: 147 (71.0%)
# CHECK-NEXT: LQ - Load queue full: 0
# CHECK-NEXT: SQ - Store queue full: 0
# CHECK-NEXT: GROUP - Static restrictions on the dispatch group: 0
# CHECK-NEXT: USH - Uncategorised Structural Hazard: 0
# CHECK: Dispatch Logic - number of cycles where we saw N micro opcodes dispatched:
# CHECK-NEXT: [# dispatched], [# cycles]
# CHECK-NEXT: 0, 33 (15.9%)
# CHECK-NEXT: 2, 148 (71.5%)
# CHECK-NEXT: 4, 26 (12.6%)
# CHECK: Schedulers - number of cycles where we saw N micro opcodes issued:
# CHECK-NEXT: [# issued], [# cycles]
# CHECK-NEXT: 0, 7 (3.4%)
# CHECK-NEXT: 2, 200 (96.6%)
# CHECK: Scheduler's queue usage:
# CHECK-NEXT: [1] Resource name.
# CHECK-NEXT: [2] Average number of used buffer entries.
# CHECK-NEXT: [3] Maximum number of used buffer entries.
# CHECK-NEXT: [4] Total number of buffer entries.
# CHECK: [1] [2] [3] [4]
# CHECK-NEXT: SBPortAny 45 54 54
# CHECK: Resources:
# CHECK-NEXT: [0] - SBDivider
# CHECK-NEXT: [1] - SBFPDivider
# CHECK-NEXT: [2] - SBPort0
# CHECK-NEXT: [3] - SBPort1
# CHECK-NEXT: [4] - SBPort4
# CHECK-NEXT: [5] - SBPort5
# CHECK-NEXT: [6.0] - SBPort23
# CHECK-NEXT: [6.1] - SBPort23
# CHECK: Resource pressure per iteration:
# CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6.0] [6.1]
# CHECK-NEXT: - - - - - - 2.00 2.00
# CHECK: Resource pressure by instruction:
# CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6.0] [6.1] Instructions:
# CHECK-NEXT: - - - - - - - 1.00 movw (%rax), %sp
# CHECK-NEXT: - - - - - - 1.00 - movw (%rcx), %bp
# CHECK-NEXT: - - - - - - - 1.00 movw (%rdx), %si
# CHECK-NEXT: - - - - - - 1.00 - movw (%rbx), %di
# CHECK: Timeline view:
# CHECK-NEXT: Index 012345678
# CHECK: [0,0] DeeeeeER. movw (%rax), %sp
# CHECK-NEXT: [0,1] DeeeeeER. movw (%rcx), %bp
# CHECK-NEXT: [0,2] D=eeeeeER movw (%rdx), %si
# CHECK-NEXT: [0,3] D=eeeeeER movw (%rbx), %di
# CHECK: Average Wait times (based on the timeline view):
# CHECK-NEXT: [0]: Executions
# CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue
# CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready
# CHECK-NEXT: [3]: Average time elapsed from WB until retire stage
# CHECK: [0] [1] [2] [3]
# CHECK-NEXT: 0. 1 1.0 1.0 0.0 movw (%rax), %sp
# CHECK-NEXT: 1. 1 1.0 1.0 0.0 movw (%rcx), %bp
# CHECK-NEXT: 2. 1 2.0 2.0 0.0 movw (%rdx), %si
# CHECK-NEXT: 3. 1 2.0 2.0 0.0 movw (%rbx), %di
# CHECK-NEXT: 1 1.5 1.5 0.0 <total>
# CHECK: [2] Code Region
# CHECK: Iterations: 100
# CHECK-NEXT: Instructions: 400
# CHECK-NEXT: Total Cycles: 207
# CHECK-NEXT: Total uOps: 400
# CHECK: Dispatch Width: 4
# CHECK-NEXT: uOps Per Cycle: 1.93
# CHECK-NEXT: IPC: 1.93
# CHECK-NEXT: Block RThroughput: 2.0
# CHECK: Instruction Info:
# CHECK-NEXT: [1]: #uOps
# CHECK-NEXT: [2]: Latency
# CHECK-NEXT: [3]: RThroughput
# CHECK-NEXT: [4]: MayLoad
# CHECK-NEXT: [5]: MayStore
# CHECK-NEXT: [6]: HasSideEffects (U)
# CHECK: [1] [2] [3] [4] [5] [6] Instructions:
# CHECK-NEXT: 1 5 0.50 * movl (%rax), %esp
# CHECK-NEXT: 1 5 0.50 * movl (%rcx), %ebp
# CHECK-NEXT: 1 5 0.50 * movl (%rdx), %esi
# CHECK-NEXT: 1 5 0.50 * movl (%rbx), %edi
# CHECK: Dynamic Dispatch Stall Cycles:
# CHECK-NEXT: RAT - Register unavailable: 0
# CHECK-NEXT: RCU - Retire tokens unavailable: 0
# CHECK-NEXT: SCHEDQ - Scheduler full: 147 (71.0%)
# CHECK-NEXT: LQ - Load queue full: 0
# CHECK-NEXT: SQ - Store queue full: 0
# CHECK-NEXT: GROUP - Static restrictions on the dispatch group: 0
# CHECK-NEXT: USH - Uncategorised Structural Hazard: 0
# CHECK: Dispatch Logic - number of cycles where we saw N micro opcodes dispatched:
# CHECK-NEXT: [# dispatched], [# cycles]
# CHECK-NEXT: 0, 33 (15.9%)
# CHECK-NEXT: 2, 148 (71.5%)
# CHECK-NEXT: 4, 26 (12.6%)
# CHECK: Schedulers - number of cycles where we saw N micro opcodes issued:
# CHECK-NEXT: [# issued], [# cycles]
# CHECK-NEXT: 0, 7 (3.4%)
# CHECK-NEXT: 2, 200 (96.6%)
# CHECK: Scheduler's queue usage:
# CHECK-NEXT: [1] Resource name.
# CHECK-NEXT: [2] Average number of used buffer entries.
# CHECK-NEXT: [3] Maximum number of used buffer entries.
# CHECK-NEXT: [4] Total number of buffer entries.
# CHECK: [1] [2] [3] [4]
# CHECK-NEXT: SBPortAny 45 54 54
# CHECK: Resources:
# CHECK-NEXT: [0] - SBDivider
# CHECK-NEXT: [1] - SBFPDivider
# CHECK-NEXT: [2] - SBPort0
# CHECK-NEXT: [3] - SBPort1
# CHECK-NEXT: [4] - SBPort4
# CHECK-NEXT: [5] - SBPort5
# CHECK-NEXT: [6.0] - SBPort23
# CHECK-NEXT: [6.1] - SBPort23
# CHECK: Resource pressure per iteration:
# CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6.0] [6.1]
# CHECK-NEXT: - - - - - - 2.00 2.00
# CHECK: Resource pressure by instruction:
# CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6.0] [6.1] Instructions:
# CHECK-NEXT: - - - - - - - 1.00 movl (%rax), %esp
# CHECK-NEXT: - - - - - - 1.00 - movl (%rcx), %ebp
# CHECK-NEXT: - - - - - - - 1.00 movl (%rdx), %esi
# CHECK-NEXT: - - - - - - 1.00 - movl (%rbx), %edi
# CHECK: Timeline view:
# CHECK-NEXT: Index 012345678
# CHECK: [0,0] DeeeeeER. movl (%rax), %esp
# CHECK-NEXT: [0,1] DeeeeeER. movl (%rcx), %ebp
# CHECK-NEXT: [0,2] D=eeeeeER movl (%rdx), %esi
# CHECK-NEXT: [0,3] D=eeeeeER movl (%rbx), %edi
# CHECK: Average Wait times (based on the timeline view):
# CHECK-NEXT: [0]: Executions
# CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue
# CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready
# CHECK-NEXT: [3]: Average time elapsed from WB until retire stage
# CHECK: [0] [1] [2] [3]
# CHECK-NEXT: 0. 1 1.0 1.0 0.0 movl (%rax), %esp
# CHECK-NEXT: 1. 1 1.0 1.0 0.0 movl (%rcx), %ebp
# CHECK-NEXT: 2. 1 2.0 2.0 0.0 movl (%rdx), %esi
# CHECK-NEXT: 3. 1 2.0 2.0 0.0 movl (%rbx), %edi
# CHECK-NEXT: 1 1.5 1.5 0.0 <total>
# CHECK: [3] Code Region
# CHECK: Iterations: 100
# CHECK-NEXT: Instructions: 400
# CHECK-NEXT: Total Cycles: 207
# CHECK-NEXT: Total uOps: 400
# CHECK: Dispatch Width: 4
# CHECK-NEXT: uOps Per Cycle: 1.93
# CHECK-NEXT: IPC: 1.93
# CHECK-NEXT: Block RThroughput: 2.0
# CHECK: Instruction Info:
# CHECK-NEXT: [1]: #uOps
# CHECK-NEXT: [2]: Latency
# CHECK-NEXT: [3]: RThroughput
# CHECK-NEXT: [4]: MayLoad
# CHECK-NEXT: [5]: MayStore
# CHECK-NEXT: [6]: HasSideEffects (U)
# CHECK: [1] [2] [3] [4] [5] [6] Instructions:
# CHECK-NEXT: 1 5 0.50 * movq (%rax), %rsp
# CHECK-NEXT: 1 5 0.50 * movq (%rcx), %rbp
# CHECK-NEXT: 1 5 0.50 * movq (%rdx), %rsi
# CHECK-NEXT: 1 5 0.50 * movq (%rbx), %rdi
# CHECK: Dynamic Dispatch Stall Cycles:
# CHECK-NEXT: RAT - Register unavailable: 0
# CHECK-NEXT: RCU - Retire tokens unavailable: 0
# CHECK-NEXT: SCHEDQ - Scheduler full: 147 (71.0%)
# CHECK-NEXT: LQ - Load queue full: 0
# CHECK-NEXT: SQ - Store queue full: 0
# CHECK-NEXT: GROUP - Static restrictions on the dispatch group: 0
# CHECK-NEXT: USH - Uncategorised Structural Hazard: 0
# CHECK: Dispatch Logic - number of cycles where we saw N micro opcodes dispatched:
# CHECK-NEXT: [# dispatched], [# cycles]
# CHECK-NEXT: 0, 33 (15.9%)
# CHECK-NEXT: 2, 148 (71.5%)
# CHECK-NEXT: 4, 26 (12.6%)
# CHECK: Schedulers - number of cycles where we saw N micro opcodes issued:
# CHECK-NEXT: [# issued], [# cycles]
# CHECK-NEXT: 0, 7 (3.4%)
# CHECK-NEXT: 2, 200 (96.6%)
# CHECK: Scheduler's queue usage:
# CHECK-NEXT: [1] Resource name.
# CHECK-NEXT: [2] Average number of used buffer entries.
# CHECK-NEXT: [3] Maximum number of used buffer entries.
# CHECK-NEXT: [4] Total number of buffer entries.
# CHECK: [1] [2] [3] [4]
# CHECK-NEXT: SBPortAny 45 54 54
# CHECK: Resources:
# CHECK-NEXT: [0] - SBDivider
# CHECK-NEXT: [1] - SBFPDivider
# CHECK-NEXT: [2] - SBPort0
# CHECK-NEXT: [3] - SBPort1
# CHECK-NEXT: [4] - SBPort4
# CHECK-NEXT: [5] - SBPort5
# CHECK-NEXT: [6.0] - SBPort23
# CHECK-NEXT: [6.1] - SBPort23
# CHECK: Resource pressure per iteration:
# CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6.0] [6.1]
# CHECK-NEXT: - - - - - - 2.00 2.00
# CHECK: Resource pressure by instruction:
# CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6.0] [6.1] Instructions:
# CHECK-NEXT: - - - - - - - 1.00 movq (%rax), %rsp
# CHECK-NEXT: - - - - - - 1.00 - movq (%rcx), %rbp
# CHECK-NEXT: - - - - - - - 1.00 movq (%rdx), %rsi
# CHECK-NEXT: - - - - - - 1.00 - movq (%rbx), %rdi
# CHECK: Timeline view:
# CHECK-NEXT: Index 012345678
# CHECK: [0,0] DeeeeeER. movq (%rax), %rsp
# CHECK-NEXT: [0,1] DeeeeeER. movq (%rcx), %rbp
# CHECK-NEXT: [0,2] D=eeeeeER movq (%rdx), %rsi
# CHECK-NEXT: [0,3] D=eeeeeER movq (%rbx), %rdi
# CHECK: Average Wait times (based on the timeline view):
# CHECK-NEXT: [0]: Executions
# CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue
# CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready
# CHECK-NEXT: [3]: Average time elapsed from WB until retire stage
# CHECK: [0] [1] [2] [3]
# CHECK-NEXT: 0. 1 1.0 1.0 0.0 movq (%rax), %rsp
# CHECK-NEXT: 1. 1 1.0 1.0 0.0 movq (%rcx), %rbp
# CHECK-NEXT: 2. 1 2.0 2.0 0.0 movq (%rdx), %rsi
# CHECK-NEXT: 3. 1 2.0 2.0 0.0 movq (%rbx), %rdi
# CHECK-NEXT: 1 1.5 1.5 0.0 <total>
# CHECK: [4] Code Region
# CHECK: Iterations: 100
# CHECK-NEXT: Instructions: 400
# CHECK-NEXT: Total Cycles: 207
# CHECK-NEXT: Total uOps: 400
# CHECK: Dispatch Width: 4
# CHECK-NEXT: uOps Per Cycle: 1.93
# CHECK-NEXT: IPC: 1.93
# CHECK-NEXT: Block RThroughput: 2.0
# CHECK: Instruction Info:
# CHECK-NEXT: [1]: #uOps
# CHECK-NEXT: [2]: Latency
# CHECK-NEXT: [3]: RThroughput
# CHECK-NEXT: [4]: MayLoad
# CHECK-NEXT: [5]: MayStore
# CHECK-NEXT: [6]: HasSideEffects (U)
# CHECK: [1] [2] [3] [4] [5] [6] Instructions:
# CHECK-NEXT: 1 5 0.50 * movd (%rax), %mm0
# CHECK-NEXT: 1 5 0.50 * movd (%rcx), %mm1
# CHECK-NEXT: 1 5 0.50 * movd (%rdx), %mm2
# CHECK-NEXT: 1 5 0.50 * movd (%rbx), %mm3
# CHECK: Dynamic Dispatch Stall Cycles:
# CHECK-NEXT: RAT - Register unavailable: 0
# CHECK-NEXT: RCU - Retire tokens unavailable: 0
# CHECK-NEXT: SCHEDQ - Scheduler full: 147 (71.0%)
# CHECK-NEXT: LQ - Load queue full: 0
# CHECK-NEXT: SQ - Store queue full: 0
# CHECK-NEXT: GROUP - Static restrictions on the dispatch group: 0
# CHECK-NEXT: USH - Uncategorised Structural Hazard: 0
# CHECK: Dispatch Logic - number of cycles where we saw N micro opcodes dispatched:
# CHECK-NEXT: [# dispatched], [# cycles]
# CHECK-NEXT: 0, 33 (15.9%)
# CHECK-NEXT: 2, 148 (71.5%)
# CHECK-NEXT: 4, 26 (12.6%)
# CHECK: Schedulers - number of cycles where we saw N micro opcodes issued:
# CHECK-NEXT: [# issued], [# cycles]
# CHECK-NEXT: 0, 7 (3.4%)
# CHECK-NEXT: 2, 200 (96.6%)
# CHECK: Scheduler's queue usage:
# CHECK-NEXT: [1] Resource name.
# CHECK-NEXT: [2] Average number of used buffer entries.
# CHECK-NEXT: [3] Maximum number of used buffer entries.
# CHECK-NEXT: [4] Total number of buffer entries.
# CHECK: [1] [2] [3] [4]
# CHECK-NEXT: SBPortAny 45 54 54
# CHECK: Resources:
# CHECK-NEXT: [0] - SBDivider
# CHECK-NEXT: [1] - SBFPDivider
# CHECK-NEXT: [2] - SBPort0
# CHECK-NEXT: [3] - SBPort1
# CHECK-NEXT: [4] - SBPort4
# CHECK-NEXT: [5] - SBPort5
# CHECK-NEXT: [6.0] - SBPort23
# CHECK-NEXT: [6.1] - SBPort23
# CHECK: Resource pressure per iteration:
# CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6.0] [6.1]
# CHECK-NEXT: - - - - - - 2.00 2.00
# CHECK: Resource pressure by instruction:
# CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6.0] [6.1] Instructions:
# CHECK-NEXT: - - - - - - - 1.00 movd (%rax), %mm0
# CHECK-NEXT: - - - - - - 1.00 - movd (%rcx), %mm1
# CHECK-NEXT: - - - - - - - 1.00 movd (%rdx), %mm2
# CHECK-NEXT: - - - - - - 1.00 - movd (%rbx), %mm3
# CHECK: Timeline view:
# CHECK-NEXT: Index 012345678
# CHECK: [0,0] DeeeeeER. movd (%rax), %mm0
# CHECK-NEXT: [0,1] DeeeeeER. movd (%rcx), %mm1
# CHECK-NEXT: [0,2] D=eeeeeER movd (%rdx), %mm2
# CHECK-NEXT: [0,3] D=eeeeeER movd (%rbx), %mm3
# CHECK: Average Wait times (based on the timeline view):
# CHECK-NEXT: [0]: Executions
# CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue
# CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready
# CHECK-NEXT: [3]: Average time elapsed from WB until retire stage
# CHECK: [0] [1] [2] [3]
# CHECK-NEXT: 0. 1 1.0 1.0 0.0 movd (%rax), %mm0
# CHECK-NEXT: 1. 1 1.0 1.0 0.0 movd (%rcx), %mm1
# CHECK-NEXT: 2. 1 2.0 2.0 0.0 movd (%rdx), %mm2
# CHECK-NEXT: 3. 1 2.0 2.0 0.0 movd (%rbx), %mm3
# CHECK-NEXT: 1 1.5 1.5 0.0 <total>
# CHECK: [5] Code Region
# CHECK: Iterations: 100
# CHECK-NEXT: Instructions: 400
# CHECK-NEXT: Total Cycles: 208
# CHECK-NEXT: Total uOps: 400
# CHECK: Dispatch Width: 4
# CHECK-NEXT: uOps Per Cycle: 1.92
# CHECK-NEXT: IPC: 1.92
# CHECK-NEXT: Block RThroughput: 2.0
# CHECK: Instruction Info:
# CHECK-NEXT: [1]: #uOps
# CHECK-NEXT: [2]: Latency
# CHECK-NEXT: [3]: RThroughput
# CHECK-NEXT: [4]: MayLoad
# CHECK-NEXT: [5]: MayStore
# CHECK-NEXT: [6]: HasSideEffects (U)
# CHECK: [1] [2] [3] [4] [5] [6] Instructions:
# CHECK-NEXT: 1 6 0.50 * movaps (%rax), %xmm0
# CHECK-NEXT: 1 6 0.50 * movaps (%rcx), %xmm1
# CHECK-NEXT: 1 6 0.50 * movaps (%rdx), %xmm2
# CHECK-NEXT: 1 6 0.50 * movaps (%rbx), %xmm3
# CHECK: Dynamic Dispatch Stall Cycles:
# CHECK-NEXT: RAT - Register unavailable: 0
# CHECK-NEXT: RCU - Retire tokens unavailable: 0
# CHECK-NEXT: SCHEDQ - Scheduler full: 147 (70.7%)
# CHECK-NEXT: LQ - Load queue full: 0
# CHECK-NEXT: SQ - Store queue full: 0
# CHECK-NEXT: GROUP - Static restrictions on the dispatch group: 0
# CHECK-NEXT: USH - Uncategorised Structural Hazard: 0
# CHECK: Dispatch Logic - number of cycles where we saw N micro opcodes dispatched:
# CHECK-NEXT: [# dispatched], [# cycles]
# CHECK-NEXT: 0, 34 (16.3%)
# CHECK-NEXT: 2, 148 (71.2%)
# CHECK-NEXT: 4, 26 (12.5%)
# CHECK: Schedulers - number of cycles where we saw N micro opcodes issued:
# CHECK-NEXT: [# issued], [# cycles]
# CHECK-NEXT: 0, 8 (3.8%)
# CHECK-NEXT: 2, 200 (96.2%)
# CHECK: Scheduler's queue usage:
# CHECK-NEXT: [1] Resource name.
# CHECK-NEXT: [2] Average number of used buffer entries.
# CHECK-NEXT: [3] Maximum number of used buffer entries.
# CHECK-NEXT: [4] Total number of buffer entries.
# CHECK: [1] [2] [3] [4]
# CHECK-NEXT: SBPortAny 45 54 54
# CHECK: Resources:
# CHECK-NEXT: [0] - SBDivider
# CHECK-NEXT: [1] - SBFPDivider
# CHECK-NEXT: [2] - SBPort0
# CHECK-NEXT: [3] - SBPort1
# CHECK-NEXT: [4] - SBPort4
# CHECK-NEXT: [5] - SBPort5
# CHECK-NEXT: [6.0] - SBPort23
# CHECK-NEXT: [6.1] - SBPort23
# CHECK: Resource pressure per iteration:
# CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6.0] [6.1]
# CHECK-NEXT: - - - - - - 2.00 2.00
# CHECK: Resource pressure by instruction:
# CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6.0] [6.1] Instructions:
# CHECK-NEXT: - - - - - - - 1.00 movaps (%rax), %xmm0
# CHECK-NEXT: - - - - - - 1.00 - movaps (%rcx), %xmm1
# CHECK-NEXT: - - - - - - - 1.00 movaps (%rdx), %xmm2
# CHECK-NEXT: - - - - - - 1.00 - movaps (%rbx), %xmm3
# CHECK: Timeline view:
# CHECK-NEXT: Index 0123456789
# CHECK: [0,0] DeeeeeeER. movaps (%rax), %xmm0
# CHECK-NEXT: [0,1] DeeeeeeER. movaps (%rcx), %xmm1
# CHECK-NEXT: [0,2] D=eeeeeeER movaps (%rdx), %xmm2
# CHECK-NEXT: [0,3] D=eeeeeeER movaps (%rbx), %xmm3
# CHECK: Average Wait times (based on the timeline view):
# CHECK-NEXT: [0]: Executions
# CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue
# CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready
# CHECK-NEXT: [3]: Average time elapsed from WB until retire stage
# CHECK: [0] [1] [2] [3]
# CHECK-NEXT: 0. 1 1.0 1.0 0.0 movaps (%rax), %xmm0
# CHECK-NEXT: 1. 1 1.0 1.0 0.0 movaps (%rcx), %xmm1
# CHECK-NEXT: 2. 1 2.0 2.0 0.0 movaps (%rdx), %xmm2
# CHECK-NEXT: 3. 1 2.0 2.0 0.0 movaps (%rbx), %xmm3
# CHECK-NEXT: 1 1.5 1.5 0.0 <total>