/**
 * \file
 *
 * \brief USB Device Human Interface Device (HID) interface.
 *
 * Copyright (c) 2009-2015 Atmel Corporation. All rights reserved.
 *
 * \asf_license_start
 *
 * \page License
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 *
 * 1. Redistributions of source code must retain the above copyright notice,
 *    this list of conditions and the following disclaimer.
 *
 * 2. Redistributions in binary form must reproduce the above copyright notice,
 *    this list of conditions and the following disclaimer in the documentation
 *    and/or other materials provided with the distribution.
 *
 * 3. The name of Atmel may not be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 *
 * 4. This software may only be redistributed and used in connection with an
 *    Atmel microcontroller product.
 *
 * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
 * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
 * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 *
 * \asf_license_stop
 *
 */
/*
 * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
 */

#include "conf_usb.h"
#include "usb_protocol.h"
#include "udd.h"
#include "udc.h"
#include "udi_hid.h"

/**
 * \ingroup udi_hid_group
 * \defgroup udi_hid_group_internal Implementation of HID common library
 * @{
 */

/**
 * \brief Send the specific descriptors requested by SETUP request
 *
 * \retval true if the descriptor is supported
 */
static bool udi_hid_reqstdifaceget_descriptor(uint8_t *report_desc);

bool udi_hid_setup(uint8_t *rate, uint8_t *protocol, uint8_t *report_desc, bool (*setup_report)(void)) {
    if (Udd_setup_is_in()) {
        // Requests Interface GET
        if (Udd_setup_type() == USB_REQ_TYPE_STANDARD) {
            // Requests Standard Interface Get
            switch (udd_g_ctrlreq.req.bRequest) {
                case USB_REQ_GET_DESCRIPTOR:
                    return udi_hid_reqstdifaceget_descriptor(report_desc);
            }
        }
        if (Udd_setup_type() == USB_REQ_TYPE_CLASS) {
            // Requests Class Interface Get
            switch (udd_g_ctrlreq.req.bRequest) {
                case USB_REQ_HID_GET_REPORT:
                    return setup_report();

                case USB_REQ_HID_GET_IDLE:
                    udd_g_ctrlreq.payload      = rate;
                    udd_g_ctrlreq.payload_size = 1;
                    return true;

                case USB_REQ_HID_GET_PROTOCOL:
                    udd_g_ctrlreq.payload      = protocol;
                    udd_g_ctrlreq.payload_size = 1;
                    return true;
            }
        }
    }
    if (Udd_setup_is_out()) {
        // Requests Interface SET
        if (Udd_setup_type() == USB_REQ_TYPE_CLASS) {
            // Requests Class Interface Set
            switch (udd_g_ctrlreq.req.bRequest) {
                case USB_REQ_HID_SET_REPORT:
                    return setup_report();

                case USB_REQ_HID_SET_IDLE:
                    *rate = udd_g_ctrlreq.req.wValue >> 8;
                    return true;

                case USB_REQ_HID_SET_PROTOCOL:
                    if (0 != udd_g_ctrlreq.req.wLength) return false;
                    *protocol = udd_g_ctrlreq.req.wValue;
                    return true;
            }
        }
    }
    return false;  // Request not supported
}

//---------------------------------------------
//------- Internal routines

static bool udi_hid_reqstdifaceget_descriptor(uint8_t *report_desc) {
    usb_hid_descriptor_t UDC_DESC_STORAGE *ptr_hid_desc;

    // Get the USB descriptor which is located after the interface descriptor
    // This descriptor must be the HID descriptor
    ptr_hid_desc = (usb_hid_descriptor_t UDC_DESC_STORAGE *)((uint8_t *)udc_get_interface_desc() + sizeof(usb_iface_desc_t));
    if (USB_DT_HID != ptr_hid_desc->bDescriptorType) return false;

    // The SETUP request can ask for:
    // - an USB_DT_HID descriptor
    // - or USB_DT_HID_REPORT descriptor
    // - or USB_DT_HID_PHYSICAL descriptor
    if (USB_DT_HID == (uint8_t)(udd_g_ctrlreq.req.wValue >> 8)) {
        // USB_DT_HID descriptor requested then send it
        udd_g_ctrlreq.payload      = (uint8_t *)ptr_hid_desc;
        udd_g_ctrlreq.payload_size = min(udd_g_ctrlreq.req.wLength, ptr_hid_desc->bLength);
        return true;
    }
    // The HID_X descriptor requested must correspond to report type
    // included in the HID descriptor
    if (ptr_hid_desc->bRDescriptorType == (uint8_t)(udd_g_ctrlreq.req.wValue >> 8)) {
        // Send HID Report descriptor given by high level
        udd_g_ctrlreq.payload      = report_desc;
        udd_g_ctrlreq.payload_size = min(udd_g_ctrlreq.req.wLength, le16_to_cpu(ptr_hid_desc->wDescriptorLength));
        return true;
    }
    return false;
}

//@}