/**
* \file
*
* \brief Instance description for SDHC0
*
* Copyright (c) 2017 Microchip Technology Inc.
*
* \asf_license_start
*
* \page License
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the Licence at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* \asf_license_stop
*
*/
#ifndef _SAMD51_SDHC0_INSTANCE_
#define _SAMD51_SDHC0_INSTANCE_
/* ========== Register definition for SDHC0 peripheral ========== */
#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
#define REG_SDHC0_SSAR (0x45000000) /**< \brief (SDHC0) SDMA System Address / Argument 2 */
#define REG_SDHC0_BSR (0x45000004) /**< \brief (SDHC0) Block Size */
#define REG_SDHC0_BCR (0x45000006) /**< \brief (SDHC0) Block Count */
#define REG_SDHC0_ARG1R (0x45000008) /**< \brief (SDHC0) Argument 1 */
#define REG_SDHC0_TMR (0x4500000C) /**< \brief (SDHC0) Transfer Mode */
#define REG_SDHC0_CR (0x4500000E) /**< \brief (SDHC0) Command */
#define REG_SDHC0_RR0 (0x45000010) /**< \brief (SDHC0) Response 0 */
#define REG_SDHC0_RR1 (0x45000014) /**< \brief (SDHC0) Response 1 */
#define REG_SDHC0_RR2 (0x45000018) /**< \brief (SDHC0) Response 2 */
#define REG_SDHC0_RR3 (0x4500001C) /**< \brief (SDHC0) Response 3 */
#define REG_SDHC0_BDPR (0x45000020) /**< \brief (SDHC0) Buffer Data Port */
#define REG_SDHC0_PSR (0x45000024) /**< \brief (SDHC0) Present State */
#define REG_SDHC0_HC1R (0x45000028) /**< \brief (SDHC0) Host Control 1 */
#define REG_SDHC0_PCR (0x45000029) /**< \brief (SDHC0) Power Control */
#define REG_SDHC0_BGCR (0x4500002A) /**< \brief (SDHC0) Block Gap Control */
#define REG_SDHC0_WCR (0x4500002B) /**< \brief (SDHC0) Wakeup Control */
#define REG_SDHC0_CCR (0x4500002C) /**< \brief (SDHC0) Clock Control */
#define REG_SDHC0_TCR (0x4500002E) /**< \brief (SDHC0) Timeout Control */
#define REG_SDHC0_SRR (0x4500002F) /**< \brief (SDHC0) Software Reset */
#define REG_SDHC0_NISTR (0x45000030) /**< \brief (SDHC0) Normal Interrupt Status */
#define REG_SDHC0_EISTR (0x45000032) /**< \brief (SDHC0) Error Interrupt Status */
#define REG_SDHC0_NISTER (0x45000034) /**< \brief (SDHC0) Normal Interrupt Status Enable */
#define REG_SDHC0_EISTER (0x45000036) /**< \brief (SDHC0) Error Interrupt Status Enable */
#define REG_SDHC0_NISIER (0x45000038) /**< \brief (SDHC0) Normal Interrupt Signal Enable */
#define REG_SDHC0_EISIER (0x4500003A) /**< \brief (SDHC0) Error Interrupt Signal Enable */
#define REG_SDHC0_ACESR (0x4500003C) /**< \brief (SDHC0) Auto CMD Error Status */
#define REG_SDHC0_HC2R (0x4500003E) /**< \brief (SDHC0) Host Control 2 */
#define REG_SDHC0_CA0R (0x45000040) /**< \brief (SDHC0) Capabilities 0 */
#define REG_SDHC0_CA1R (0x45000044) /**< \brief (SDHC0) Capabilities 1 */
#define REG_SDHC0_MCCAR (0x45000048) /**< \brief (SDHC0) Maximum Current Capabilities */
#define REG_SDHC0_FERACES (0x45000050) /**< \brief (SDHC0) Force Event for Auto CMD Error Status */
#define REG_SDHC0_FEREIS (0x45000052) /**< \brief (SDHC0) Force Event for Error Interrupt Status */
#define REG_SDHC0_AESR (0x45000054) /**< \brief (SDHC0) ADMA Error Status */
#define REG_SDHC0_ASAR0 (0x45000058) /**< \brief (SDHC0) ADMA System Address 0 */
#define REG_SDHC0_PVR0 (0x45000060) /**< \brief (SDHC0) Preset Value 0 */
#define REG_SDHC0_PVR1 (0x45000062) /**< \brief (SDHC0) Preset Value 1 */
#define REG_SDHC0_PVR2 (0x45000064) /**< \brief (SDHC0) Preset Value 2 */
#define REG_SDHC0_PVR3 (0x45000066) /**< \brief (SDHC0) Preset Value 3 */
#define REG_SDHC0_PVR4 (0x45000068) /**< \brief (SDHC0) Preset Value 4 */
#define REG_SDHC0_PVR5 (0x4500006A) /**< \brief (SDHC0) Preset Value 5 */
#define REG_SDHC0_PVR6 (0x4500006C) /**< \brief (SDHC0) Preset Value 6 */
#define REG_SDHC0_PVR7 (0x4500006E) /**< \brief (SDHC0) Preset Value 7 */
#define REG_SDHC0_SISR (0x450000FC) /**< \brief (SDHC0) Slot Interrupt Status */
#define REG_SDHC0_HCVR (0x450000FE) /**< \brief (SDHC0) Host Controller Version */
#define REG_SDHC0_MC1R (0x45000204) /**< \brief (SDHC0) MMC Control 1 */
#define REG_SDHC0_MC2R (0x45000205) /**< \brief (SDHC0) MMC Control 2 */
#define REG_SDHC0_ACR (0x45000208) /**< \brief (SDHC0) AHB Control */
#define REG_SDHC0_CC2R (0x4500020C) /**< \brief (SDHC0) Clock Control 2 */
#define REG_SDHC0_CACR (0x45000230) /**< \brief (SDHC0) Capabilities Control */
#define REG_SDHC0_DBGR (0x45000234) /**< \brief (SDHC0) Debug */
#else
#define REG_SDHC0_SSAR (*(RwReg *)0x45000000UL) /**< \brief (SDHC0) SDMA System Address / Argument 2 */
#define REG_SDHC0_BSR (*(RwReg16*)0x45000004UL) /**< \brief (SDHC0) Block Size */
#define REG_SDHC0_BCR (*(RwReg16*)0x45000006UL) /**< \brief (SDHC0) Block Count */
#define REG_SDHC0_ARG1R (*(RwReg *)0x45000008UL) /**< \brief (SDHC0) Argument 1 */
#define REG_SDHC0_TMR (*(RwReg16*)0x4500000CUL) /**< \brief (SDHC0) Transfer Mode */
#define REG_SDHC0_CR (*(RwReg16*)0x4500000EUL) /**< \brief (SDHC0) Command */
#define REG_SDHC0_RR0 (*(RoReg *)0x45000010UL) /**< \brief (SDHC0) Response 0 */
#define REG_SDHC0_RR1 (*(RoReg *)0x45000014UL) /**< \brief (SDHC0) Response 1 */
#define REG_SDHC0_RR2 (*(RoReg *)0x45000018UL) /**< \brief (SDHC0) Response 2 */
#define REG_SDHC0_RR3 (*(RoReg *)0x4500001CUL) /**< \brief (SDHC0) Response 3 */
#define REG_SDHC0_BDPR (*(RwReg *)0x45000020UL) /**< \brief (SDHC0) Buffer Data Port */
#define REG_SDHC0_PSR (*(RoReg *)0x45000024UL) /**< \brief (SDHC0) Present State */
#define REG_SDHC0_HC1R (*(RwReg8 *)0x45000028UL) /**< \brief (SDHC0) Host Control 1 */
#define REG_SDHC0_PCR (*(RwReg8 *)0x45000029UL) /**< \brief (SDHC0) Power Control */
#define REG_SDHC0_BGCR (*(RwReg8 *)0x4500002AUL) /**< \brief (SDHC0) Block Gap Control */
#define REG_SDHC0_WCR (*(RwReg8 *)0x4500002BUL) /**< \brief (SDHC0) Wakeup Control */
#define REG_SDHC0_CCR (*(RwReg16*)0x4500002CUL) /**< \brief (SDHC0) Clock Control */
#define REG_SDHC0_TCR (*(RwReg8 *)0x4500002EUL) /**< \brief (SDHC0) Timeout Control */
#define REG_SDHC0_SRR (*(RwReg8 *)0x4500002FUL) /**< \brief (SDHC0) Software Reset */
#define REG_SDHC0_NISTR (*(RwReg16*)0x45000030UL) /**< \brief (SDHC0) Normal Interrupt Status */
#define REG_SDHC0_EISTR (*(RwReg16*)0x45000032UL) /**< \brief (SDHC0) Error Interrupt Status */
#define REG_SDHC0_NISTER (*(RwReg16*)0x45000034UL) /**< \brief (SDHC0) Normal Interrupt Status Enable */
#define REG_SDHC0_EISTER (*(RwReg16*)0x45000036UL) /**< \brief (SDHC0) Error Interrupt Status Enable */
#define REG_SDHC0_NISIER (*(RwReg16*)0x45000038UL) /**< \brief (SDHC0) Normal Interrupt Signal Enable */
#define REG_SDHC0_EISIER (*(RwReg16*)0x4500003AUL) /**< \brief (SDHC0) Error Interrupt Signal Enable */
#define REG_SDHC0_ACESR (*(RoReg16*)0x4500003CUL) /**< \brief (SDHC0) Auto CMD Error Status */
#define REG_SDHC0_HC2R (*(RwReg16*)0x4500003EUL) /**< \brief (SDHC0) Host Control 2 */
#define REG_SDHC0_CA0R (*(RoReg *)0x45000040UL) /**< \brief (SDHC0) Capabilities 0 */
#define REG_SDHC0_CA1R (*(RoReg *)0x45000044UL) /**< \brief (SDHC0) Capabilities 1 */
#define REG_SDHC0_MCCAR (*(RoReg *)0x45000048UL) /**< \brief (SDHC0) Maximum Current Capabilities */
#define REG_SDHC0_FERACES (*(WoReg16*)0x45000050UL) /**< \brief (SDHC0) Force Event for Auto CMD Error Status */
#define REG_SDHC0_FEREIS (*(WoReg16*)0x45000052UL) /**< \brief (SDHC0) Force Event for Error Interrupt Status */
#define REG_SDHC0_AESR (*(RoReg8 *)0x45000054UL) /**< \brief (SDHC0) ADMA Error Status */
#define REG_SDHC0_ASAR0 (*(RwReg *)0x45000058UL) /**< \brief (SDHC0) ADMA System Address 0 */
#define REG_SDHC0_PVR0 (*(RwReg16*)0x45000060UL) /**< \brief (SDHC0) Preset Value 0 */
#define REG_SDHC0_PVR1 (*(RwReg16*)0x45000062UL) /**< \brief (SDHC0) Preset Value 1 */
#define REG_SDHC0_PVR2 (*(RwReg16*)0x45000064UL) /**< \brief (SDHC0) Preset Value 2 */
#define REG_SDHC0_PVR3 (*(RwReg16*)0x45000066UL) /**< \brief (SDHC0) Preset Value 3 */
#define REG_SDHC0_PVR4 (*(RwReg16*)0x45000068UL) /**< \brief (SDHC0) Preset Value 4 */
#define REG_SDHC0_PVR5 (*(RwReg16*)0x4500006AUL) /**< \brief (SDHC0) Preset Value 5 */
#define REG_SDHC0_PVR6 (*(RwReg16*)0x4500006CUL) /**< \brief (SDHC0) Preset Value 6 */
#define REG_SDHC0_PVR7 (*(RwReg16*)0x4500006EUL) /**< \brief (SDHC0) Preset Value 7 */
#define REG_SDHC0_SISR (*(RoReg16*)0x450000FCUL) /**< \brief (SDHC0) Slot Interrupt Status */
#define REG_SDHC0_HCVR (*(RoReg16*)0x450000FEUL) /**< \brief (SDHC0) Host Controller Version */
#define REG_SDHC0_MC1R (*(RwReg8 *)0x45000204UL) /**< \brief (SDHC0) MMC Control 1 */
#define REG_SDHC0_MC2R (*(WoReg8 *)0x45000205UL) /**< \brief (SDHC0) MMC Control 2 */
#define REG_SDHC0_ACR (*(RwReg *)0x45000208UL) /**< \brief (SDHC0) AHB Control */
#define REG_SDHC0_CC2R (*(RwReg *)0x4500020CUL) /**< \brief (SDHC0) Clock Control 2 */
#define REG_SDHC0_CACR (*(RwReg *)0x45000230UL) /**< \brief (SDHC0) Capabilities Control */
#define REG_SDHC0_DBGR (*(RwReg8 *)0x45000234UL) /**< \brief (SDHC0) Debug */
#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
/* ========== Instance parameters for SDHC0 peripheral ========== */
#define SDHC0_CARD_DATA_SIZE 4
#define SDHC0_CLK_AHB_ID 15
#define SDHC0_GCLK_ID 45
#define SDHC0_GCLK_ID_SLOW 3
#define SDHC0_NB_OF_DEVICES 1
#define SDHC0_NB_REG_PVR 8
#define SDHC0_NB_REG_RR 4
#endif /* _SAMD51_SDHC0_INSTANCE_ */