/* Example sketch for the Xbox Wireless Reciver library - developed by Kristian Lauszus It supports up to four controllers wirelessly For more information see the blog post: http://blog.tkjelectronics.dk/2012/12/xbox-360-receiver-added-to-the-usb-host-library/ or send me an e-mail: kristianl@tkjelectronics.com */ #include <XBOXRECV.h> // Satisfy the IDE, which needs to see the include statment in the ino too. #ifdef dobogusinclude #include <spi4teensy3.h> #include <SPI.h> #endif USB Usb; XBOXRECV Xbox(&Usb); void setup() { Serial.begin(115200); #if !defined(__MIPSEL__) while (!Serial); // Wait for serial port to connect - used on Leonardo, Teensy and other boards with built-in USB CDC serial connection #endif if (Usb.Init() == -1) { Serial.print(F("\r\nOSC did not start")); while (1); //halt } Serial.print(F("\r\nXbox Wireless Receiver Library Started")); } void loop() { Usb.Task(); if (Xbox.XboxReceiverConnected) { for (uint8_t i = 0; i < 4; i++) { if (Xbox.Xbox360Connected[i]) { if (Xbox.getButtonPress(L2, i) || Xbox.getButtonPress(R2, i)) { Serial.print("L2: "); Serial.print(Xbox.getButtonPress(L2, i)); Serial.print("\tR2: "); Serial.println(Xbox.getButtonPress(R2, i)); Xbox.setRumbleOn(Xbox.getButtonPress(L2, i), Xbox.getButtonPress(R2, i), i); } if (Xbox.getAnalogHat(LeftHatX, i) > 7500 || Xbox.getAnalogHat(LeftHatX, i) < -7500 || Xbox.getAnalogHat(LeftHatY, i) > 7500 || Xbox.getAnalogHat(LeftHatY, i) < -7500 || Xbox.getAnalogHat(RightHatX, i) > 7500 || Xbox.getAnalogHat(RightHatX, i) < -7500 || Xbox.getAnalogHat(RightHatY, i) > 7500 || Xbox.getAnalogHat(RightHatY, i) < -7500) { if (Xbox.getAnalogHat(LeftHatX, i) > 7500 || Xbox.getAnalogHat(LeftHatX, i) < -7500) { Serial.print(F("LeftHatX: ")); Serial.print(Xbox.getAnalogHat(LeftHatX, i)); Serial.print("\t"); } if (Xbox.getAnalogHat(LeftHatY, i) > 7500 || Xbox.getAnalogHat(LeftHatY, i) < -7500) { Serial.print(F("LeftHatY: ")); Serial.print(Xbox.getAnalogHat(LeftHatY, i)); Serial.print("\t"); } if (Xbox.getAnalogHat(RightHatX, i) > 7500 || Xbox.getAnalogHat(RightHatX, i) < -7500) { Serial.print(F("RightHatX: ")); Serial.print(Xbox.getAnalogHat(RightHatX, i)); Serial.print("\t"); } if (Xbox.getAnalogHat(RightHatY, i) > 7500 || Xbox.getAnalogHat(RightHatY, i) < -7500) { Serial.print(F("RightHatY: ")); Serial.print(Xbox.getAnalogHat(RightHatY, i)); } Serial.println(); } if (Xbox.getButtonClick(UP, i)) { Xbox.setLedOn(LED1, i); Serial.println(F("Up")); } if (Xbox.getButtonClick(DOWN, i)) { Xbox.setLedOn(LED4, i); Serial.println(F("Down")); } if (Xbox.getButtonClick(LEFT, i)) { Xbox.setLedOn(LED3, i); Serial.println(F("Left")); } if (Xbox.getButtonClick(RIGHT, i)) { Xbox.setLedOn(LED2, i); Serial.println(F("Right")); } if (Xbox.getButtonClick(START, i)) { Xbox.setLedMode(ALTERNATING, i); Serial.println(F("Start")); } if (Xbox.getButtonClick(BACK, i)) { Xbox.setLedBlink(ALL, i); Serial.println(F("Back")); } if (Xbox.getButtonClick(L3, i)) Serial.println(F("L3")); if (Xbox.getButtonClick(R3, i)) Serial.println(F("R3")); if (Xbox.getButtonClick(L1, i)) Serial.println(F("L1")); if (Xbox.getButtonClick(R1, i)) Serial.println(F("R1")); if (Xbox.getButtonClick(XBOX, i)) { Xbox.setLedMode(ROTATING, i); Serial.print(F("Xbox (Battery: ")); Serial.print(Xbox.getBatteryLevel(i)); // The battery level in the range 0-3 Serial.println(F(")")); } if (Xbox.getButtonClick(SYNC, i)) { Serial.println(F("Sync")); Xbox.disconnect(i); } if (Xbox.getButtonClick(A, i)) Serial.println(F("A")); if (Xbox.getButtonClick(B, i)) Serial.println(F("B")); if (Xbox.getButtonClick(X, i)) Serial.println(F("X")); if (Xbox.getButtonClick(Y, i)) Serial.println(F("Y")); } } } }