/* Copyright (C) 2012 Kristian Lauszus, TKJ Electronics. All rights reserved.
This software may be distributed and modified under the terms of the GNU
General Public License version 2 (GPL2) as published by the Free Software
Foundation and appearing in the file GPL2.TXT included in the packaging of
this file. Please note that GPL2 Section 2[b] requires that all works based
on this software must also be made publicly available under the terms of
the GPL2 ("Copyleft").
Contact information
-------------------
Kristian Lauszus, TKJ Electronics
Web : http://www.tkjelectronics.com
e-mail : kristianl@tkjelectronics.com
*/
#ifndef _ps3usb_h_
#define _ps3usb_h_
#include "Usb.h"
#include "hid.h"
#include "PS3Enums.h"
/* PS3 data taken from descriptors */
#define EP_MAXPKTSIZE 64 // max size for data via USB
/* Names we give to the 3 ps3 pipes - this is only used for setting the bluetooth address into the ps3 controllers */
#define PS3_CONTROL_PIPE 0
#define PS3_OUTPUT_PIPE 1
#define PS3_INPUT_PIPE 2
//PID and VID of the different devices
#define PS3_VID 0x054C // Sony Corporation
#define PS3_PID 0x0268 // PS3 Controller DualShock 3
#define PS3NAVIGATION_PID 0x042F // Navigation controller
#define PS3MOVE_PID 0x03D5 // Motion controller
#define PS3_MAX_ENDPOINTS 3
/**
* This class implements support for all the official PS3 Controllers:
* Dualshock 3, Navigation or a Motion controller via USB.
*
* One can only set the color of the bulb, set the rumble, set and get the bluetooth address and calibrate the magnetometer via USB on the Move controller.
*
* Information about the protocol can be found at the wiki: https://github.com/felis/USB_Host_Shield_2.0/wiki/PS3-Information.
*/
class PS3USB : public USBDeviceConfig {
public:
/**
* Constructor for the PS3USB class.
* @param pUsb Pointer to USB class instance.
* @param btadr5,btadr4,btadr3,btadr2,btadr1,btadr0
* Pass your dongles Bluetooth address into the constructor,
* so you are able to pair the controller with a Bluetooth dongle.
*/
PS3USB(USB *pUsb, uint8_t btadr5 = 0, uint8_t btadr4 = 0, uint8_t btadr3 = 0, uint8_t btadr2 = 0, uint8_t btadr1 = 0, uint8_t btadr0 = 0);
/** @name USBDeviceConfig implementation */
/**
* Initialize the PS3 Controller.
* @param parent Hub number.
* @param port Port number on the hub.
* @param lowspeed Speed of the device.
* @return 0 on success.
*/
uint8_t Init(uint8_t parent, uint8_t port, bool lowspeed);
/**
* Release the USB device.
* @return 0 on success.
*/
uint8_t Release();
/**
* Poll the USB Input endpoins and run the state machines.
* @return 0 on success.
*/
uint8_t Poll();
/**
* Get the device address.
* @return The device address.
*/
virtual uint8_t GetAddress() {
return bAddress;
};
/**
* Used to check if the controller has been initialized.
* @return True if it's ready.
*/
virtual bool isReady() {
return bPollEnable;
};
/**
* Used by the USB core to check what this driver support.
* @param vid The device's VID.
* @param pid The device's PID.
* @return Returns true if the device's VID and PID matches this driver.
*/
virtual bool VIDPIDOK(uint16_t vid, uint16_t pid) {
return (vid == PS3_VID && (pid == PS3_PID || pid == PS3NAVIGATION_PID || pid == PS3MOVE_PID));
};
/**@}*/
/**
* Used to set the Bluetooth address inside the Dualshock 3 and Navigation controller.
* Set using LSB first.
* @param bdaddr Your dongles Bluetooth address.
*/
void setBdaddr(uint8_t *bdaddr);
/**
* Used to get the Bluetooth address inside the Dualshock 3 and Navigation controller.
* Will return LSB first.
* @param bdaddr Your dongles Bluetooth address.
*/
void getBdaddr(uint8_t *bdaddr);
/**
* Used to set the Bluetooth address inside the Move controller.
* Set using LSB first.
* @param bdaddr Your dongles Bluetooth address.
*/
void setMoveBdaddr(uint8_t *bdaddr);
/**
* Used to get the Bluetooth address inside the Move controller.
* Will return LSB first.
* @param bdaddr Your dongles Bluetooth address.
*/
void getMoveBdaddr(uint8_t *bdaddr);
/**
* Used to get the calibration data inside the Move controller.
* @param data Buffer to store data in. Must be at least 147 bytes
*/
void getMoveCalibration(uint8_t *data);
/** @name PS3 Controller functions */
/**
* getButtonPress(ButtonEnum b) will return true as long as the button is held down.
*
* While getButtonClick(ButtonEnum b) will only return it once.
*
* So you instance if you need to increase a variable once you would use getButtonClick(ButtonEnum b),
* but if you need to drive a robot forward you would use getButtonPress(ButtonEnum b).
* @param b ::ButtonEnum to read.
* @return getButtonPress(ButtonEnum b) will return a true as long as a button is held down, while getButtonClick(ButtonEnum b) will return true once for each button press.
*/
bool getButtonPress(ButtonEnum b);
bool getButtonClick(ButtonEnum b);
/**@}*/
/** @name PS3 Controller functions */
/**
* Used to get the analog value from button presses.
* @param a The ::ButtonEnum to read.
* The supported buttons are:
* ::UP, ::RIGHT, ::DOWN, ::LEFT, ::L1, ::L2, ::R1, ::R2,
* ::TRIANGLE, ::CIRCLE, ::CROSS, ::SQUARE, and ::T.
* @return Analog value in the range of 0-255.
*/
uint8_t getAnalogButton(ButtonEnum a);
/**
* Used to read the analog joystick.
* @param a ::LeftHatX, ::LeftHatY, ::RightHatX, and ::RightHatY.
* @return Return the analog value in the range of 0-255.
*/
uint8_t getAnalogHat(AnalogHatEnum a);
/**
* Used to read the sensors inside the Dualshock 3 controller.
* @param a
* The Dualshock 3 has a 3-axis accelerometer and a 1-axis gyro inside.
* @return Return the raw sensor value.
*/
uint16_t getSensor(SensorEnum a);
/**
* Use this to get ::Pitch and ::Roll calculated using the accelerometer.
* @param a Either ::Pitch or ::Roll.
* @return Return the angle in the range of 0-360.
*/
double getAngle(AngleEnum a);
/**
* Get the ::StatusEnum from the controller.
* @param c The ::StatusEnum you want to read.
* @return True if correct and false if not.
*/
bool getStatus(StatusEnum c);
/** Read all the available statuses from the controller and prints it as a nice formated string. */
void printStatusString();
/** Used to set all LEDs and rumble off. */
void setAllOff();
/** Turn off rumble. */
void setRumbleOff();
/**
* Turn on rumble.
* @param mode Either ::RumbleHigh or ::RumbleLow.
*/
void setRumbleOn(RumbleEnum mode);
/**
* Turn on rumble using custom duration and power.
* @param rightDuration The duration of the right/low rumble effect.
* @param rightPower The intensity of the right/low rumble effect.
* @param leftDuration The duration of the left/high rumble effect.
* @param leftPower The intensity of the left/high rumble effect.
*/
void setRumbleOn(uint8_t rightDuration, uint8_t rightPower, uint8_t leftDuration, uint8_t leftPower);
/**
* Set LED value without using the ::LEDEnum.
* @param value See: ::LEDEnum.
*/
void setLedRaw(uint8_t value);
/** Turn all LEDs off. */
void setLedOff() {
setLedRaw(0);
}
/**
* Turn the specific ::LEDEnum off.
* @param a The ::LEDEnum to turn off.
*/
void setLedOff(LEDEnum a);
/**
* Turn the specific ::LEDEnum on.
* @param a The ::LEDEnum to turn on.
*/
void setLedOn(LEDEnum a);
/**
* Toggle the specific ::LEDEnum.
* @param a The ::LEDEnum to toggle.
*/
void setLedToggle(LEDEnum a);
/**
* Use this to set the Color using RGB values.
* @param r,g,b RGB value.
*/
void moveSetBulb(uint8_t r, uint8_t g, uint8_t b);
/**
* Use this to set the color using the predefined colors in ::ColorsEnum.
* @param color The desired color.
*/
void moveSetBulb(ColorsEnum color);
/**
* Set the rumble value inside the Move controller.
* @param rumble The desired value in the range from 64-255.
*/
void moveSetRumble(uint8_t rumble);
/**
* Used to call your own function when the controller is successfully initialized.
* @param funcOnInit Function to call.
*/
void attachOnInit(void (*funcOnInit)(void)) {
pFuncOnInit = funcOnInit;
};
/**@}*/
/** Variable used to indicate if the normal playstation controller is successfully connected. */
bool PS3Connected;
/** Variable used to indicate if the move controller is successfully connected. */
bool PS3MoveConnected;
/** Variable used to indicate if the navigation controller is successfully connected. */
bool PS3NavigationConnected;
protected:
/** Pointer to USB class instance. */
USB *pUsb;
/** Device address. */
uint8_t bAddress;
/** Endpoint info structure. */
EpInfo epInfo[PS3_MAX_ENDPOINTS];
private:
/**
* Called when the controller is successfully initialized.
* Use attachOnInit(void (*funcOnInit)(void)) to call your own function.
* This is useful for instance if you want to set the LEDs in a specific way.
*/
void onInit();
void (*pFuncOnInit)(void); // Pointer to function called in onInit()
bool bPollEnable;
uint32_t timer; // used to continuously set PS3 Move controller Bulb and rumble values
uint32_t ButtonState;
uint32_t OldButtonState;
uint32_t ButtonClickState;
uint8_t my_bdaddr[6]; // Change to your dongles Bluetooth address in the constructor
uint8_t readBuf[EP_MAXPKTSIZE]; // General purpose buffer for input data
uint8_t writeBuf[EP_MAXPKTSIZE]; // General purpose buffer for output data
void readReport(); // read incoming data
void printReport(); // print incoming date - Uncomment for debugging
/* Private commands */
void PS3_Command(uint8_t *data, uint16_t nbytes);
void enable_sixaxis(); // Command used to enable the Dualshock 3 and Navigation controller to send data via USB
void Move_Command(uint8_t *data, uint16_t nbytes);
};
#endif